Electron-Irradiated Montmorillonite/Polyethylene Composite Separator for High-Performance Lithium-Ion Battery

Abstract

Separators play a significant role in the safety and performance of lithium-ion batteries. In this study, composite separators were fabricated using montmorillonite (MMT) as a filler in a high-density polyethylene (HDPE) matrix, followed by electron irradiation to enhance the safety and performance of separator. Electron irradiation induces chemical bonds by crosslinking between HDPE chains, also between the MMT and HDPE. MMT features a two-dimensional layered structure with a high surface area, providing abundant crosslinking sites. MMT is treated with a silane coupling agent, which induces layer exfoliation. The exfoliation increases the surface area of MMT, thereby providing more crosslinking sites. Additionally, the surface modification of MMT enhances its affinity with HDPE, leading to better dispersion of MMT within the HDPE matrix. Simultaneously, electron irradiation in an air atmosphere generates polar functional groups, improving the electrolyte affinity of the separator. Consequently, the safety of the MMT composite separator was significantly enhanced, exhibiting a high puncture strength of 0.52 N µm^-1 and a thermal shrinkage rate of 21.4% at 135°C for 30 min. Li//LCO cells using the composite separator demonstrated superb cycle stability with a discharge retention of 98.7% and a coulombic efficiency of 99.6% after 200 cycles at 0.5 C, and exhibited rate capability maintaining 74.5% of the capacity at 20 C compared to 0.5 C.

Keywords

composite separator / electron irradiation / HDPE / montmorillonite / silane treatment

References

[1] H. Lee, M. Yanilmaz, O. Toprakci, K. Fu, and X. Zhang, “A Review of Recent Developments in Membrane Separators for Rechargeable Lithium-Ion Batteries,” Energy & Environmental Science 7 (2014):3857–3886.

[2] V. Deimede and C. Elmasides, “Separators for Lithium-Ion Batteries: A Review on the Production Processes and Recent Developments,” Energy Technology 3 (2015):453–468.

[3] M. Wakihara, “Recent Developments in Lithium Ion Batteries,” Materials Science and Engineering: R: Reports 33 (2001):109–134.

[4] J. Cho, Y.-C. Jung, Y. S. Lee, and D.-W. Kim, “High Performance Separator Coated With Amino-Functionalized SiO₂ Particles for Safety Enhanced Lithium-Ion Batteries,” Journal of Membrane Science 535 (2017):151–157.

[5] X. Huang, “Separator Technologies for Lithium-Ion Batteries,” Journal of Solid State Electrochemistry 15 (2011):649–662.

[6] Z. Liu, Y. Jiang, Q. Hu, et al., “Safer Lithium-Ion Batteries From the Separator Aspect: Development and Future Perspectives,” Energy &Environ Materials 4 (2021):336–362.

[7] T. Lei, W. Chen, Y. Hu, et al., “A Nonflammable and Thermotolerant Separator Suppresses Polysulfide Dissolution for Safe and Long-Cycle Lithium-Sulfur Batteries,” Advanced Energy Materials 8 (2018):1802441.

[8] H. Wu, D. Zhuo, D. Kong, and Y. Cui, “Improving Battery Safety by Early Detection of Internal Shorting With a Bifunctional Separator,” Nature Communications 5 (2014):5193.

[9] X. Jiang, X. Zhu, X. Ai, H. Yang, and Y. Cao, “Novel Ceramic-Grafted Separator With Highly Thermal Stability for Safe Lithium-Ion Batteries,” ACS Applied Materials &Interfaces 9 (2017):25970–25975.

[10] X. Huang and J. Hitt, “Lithium Ion Battery Separators: Development and Performance Characterization of a Composite Membrane,” Journal of Membrane Science 163 (2013):425–426.

[11] Q. Wang, B. Mao, S. I. Stoliarov, and J. Sun, “A Review of Lithium Ion Battery Failure Mechanisms and Fire Prevention Strategies,” Progress in Energy and Combustion Science 73 (2019):95–131.

[12] A. Lewandowski and A. Świderska-Mocek, “Ionic Liquids as Electrolytes for Li-Ion Batteries—An Overview of Electrochemical Studies,” Journal of Power Sources 194 (2009):601–609.

[13] S. Zhong, B. Yuan, Z. Guang, et al., “Recent Progress in Thin Separators for Upgraded Lithium Ion Batteries,” Energy Storage Materials 41 (2021):805–841.

[14] J. Zhang, Z. Liu, Q. Kong, et al., “Renewable and Superior Thermal-Resistant Cellulose-Based Composite Nonwoven as Lithium-Ion Battery Separator,” ACS Applied Materials & Interfaces 5 (2013):128–134.

[15] Y. Hou, Z. Huang, Z. Chen, et al., “Bifunctional Separators Design for Safe Lithium-Ion Batteries: Suppressed Lithium Dendrites and Fire Retardance,” Nano Energy 97 (2022):107204.

[16] H. Fayaz, A. Afzal, A. D. M. Samee, et al., “Optimization of Thermal and Structural Design in Lithium-Ion Batteries to Obtain Energy Efficient Battery Thermal Management System (BTMS): A Critical Review,” Archives of Computational Methods in Engineering 29 (2022):129–194.

[17] X. Jin, X. Duan, W. Jiang, et al., “Structural Design of a Composite Board/Heat Pipe Based on the Coupled Electro-Chemical-Thermal Model in Battery Thermal Management System,” Energy 216 (2021):119234.

[18] W. Lv and X. Zhang, “Recent Advances in Lithium-Ion Battery Separators With Enhanced Safety,” in 60 Years of the Loeb-Sourirajan Membrane, eds. H.-H. Tseng, W. J. Lau, and L. An (Amsterdam: Elsevier Inc., 2022), 269–304.

[19] L. Ding, N. Yan, S. Zhang, et al., “Low-Cost and Large-Scale Fabricating Technology for High-Performance Lithium-Ion Battery Composite Separators With Connected nano-Al₂O₃ Coating,” ACS Applied Energy Materials 5 (2021):615–626.

[20] S. Luiso and P. Fedkiw, “Lithium-Ion Battery Separators: Recent Developments and State of Art,” Current Opinion in Electrochemistry 20 (2020):99–107.

[21] A. Davoodabadi, C. Jin, D. L. Wood, III, T. J. Singler, and J. Li, “On Electrolyte Wetting Through Lithium-Ion Battery Separators,” Extreme Mechanics Letters 40 (2020):100960.

[22] P. Zhang, L. Chen, C. Shi, P. Yang, and J. Zhao, “Development and Characterization of Silica Tube-Coated Separator for Lithium Ion Batteries,” Journal of Power Sources 284 (2015):10–15.

[23] H. Jeon, J. Choi, M. H. Ryou, and Y. M. Lee, “Comparative Study of the Adhesion Properties of Ceramic Composite Separators Using a Surface and Interfacial Cutting Analysis System for Lithium-Ion Batteries,” ACS Omega 2 (2017):2159–2164.

[24] J. Nunes-Pereira, C. M. Costa, and S. Lanceros-Méndez, “Polymer Composites and Blends for Battery Separators: State of the Art, Challenges and Future Trends,” Journal of Power Sources 281 (2015):378–398.

[25] X. Li, J. Zhang, X. Guo, et al., “An Ultrathin Nonporous Polymer Separator Regulates Na Transfer Toward Dendrite-Free Sodium Storage Batteries,” Advanced Materials 35 (2023):2203547.

[26] X. Guo, X. Li, Y. Xu, et al., “Understanding the Accelerated Sodium-Ion-Transport Mechanism of an Interfacial Modified Polyacrylonitrile Separator,” Journal of Physical Chemistry C 126 (2022):8238–8247.

[27] D. M. D Babiker, C. Wan, B. Mansoor, et al., “Superior Lithium Battery Separator With Extraordinary Electrochemical Performance and Thermal Stability Based on Hybrid UHMWPE/SiO₂ Nanocomposites via the Scalable Biaxial Stretching Process,” Composites, Part B: Engineering 211 (2021):108658.

[28] B. Yuan, K. Wen, D. Chen, et al., “Composite Separators for Robust High Rate Lithium Ion Batteries,” Advanced Functional Materials 31 (2021):32.

[29] X. Huang and J. Hitt, “Lithium Ion Battery Separators: Development and Performance Characterization of a Composite Membrane,” Journal of Membrane Science 425-426 (2013):163–168.

[30] J. Leblanc, “Rubber–Filler Interactions and Rheological Properties in Filled Compounds,” Progress in Polymer Science 27 (2002):627–687.

[31] S. Y. Lee, J. H. Lee, J. Lee, S. Kim, and S. O. Cho, “Safety and Performance Enhanced Boehmite-Coupled Polyethylene Nanocomposite Separator for Lithium-Ion Batteries by Synergetic Effects of Silane Treatment and Electron Irradiation,” Journal of Power Sources 560 (2023):232718.

[32] N. Baig, “Two-Dimensional Nanomaterials: A Critical Review of Recent Progress, Properties, Applications, and Future Directions,” Composites, Part A: Applied Science and Manufacturing 165 (2023):107362.

[33] K. Pożyczka, M. Marzantowicz, J. R. Dygas, and F. Krok, “Ionic Conductivity and Lithium Transference Number of Poly(Ethylene Oxide):LiTFSI System,” Electrochimica Acta 227 (2017):127–135.

[34] Z. Danková, A. Mockovčiaková, and S. Dolinská, “Influence of Ultrasound Irradiation on Cadmium Cations Adsorption by Montmorillonite,” Desalination and Water Treatment 52, no. 28-30 (2014):5462–469.

[35] E. Günister, D. Pestreli, C. H. Ünlü, O. Atıcı, and N. Güngör, “Synthesis and Characterization of Chitosan-MMT Biocomposite Systems,” Carbohydrate Polymers 67 (2007):358–365.

[36] H. Tsuruta, Y. Fujii, N. Kai, et al., “Local Conformation and Relaxation of Polystyrene at Substrate Interface,” Macromolecules 45 (2012):4643–4649.

[37] S. L. Bee, M. A. A. Abdullah, S. T. Bee, L. T. Sin, and A. R. Rahmat, “Polymer Nanocomposites Based on Silylated-Montmorillonite: A Review,” Progress in Polymer Science 85 (2018):57–82.

[38] A. A. Silva, K. Dahmouche, and B. G. Soares, “Nanostructure and Dynamic Mechanical Properties of Silane-Functionalized Montmorillonite/Epoxy Nanocomposites,” Applied Clay Science 54 (2011):151–158.

[39] K. Oyaizu and H. Nishide, “Radical Polymers for Organic Electronic Devices: A Radical Departure From Conjugated Polymers,” Advanced Materials 21 (2009):2339–2344.

[40] T. Sasuga and M. Hagiwara, “Radiation Deterioration of Several Aromatic Polymers Under Oxidative Conditions,” Polymer 28 (1987):1915–1921.

[41] E. J. Lawton, P. D. Zemany, and J. S. Balwit, “Gases Liberated During the High Voltage Electron Irradiation of Polyethylene,” Journal of the American Chemical Society 76 (1954):3437–3439.

[42] H. Liao, H. Hong, H. Zhang, and Z. Li, “Preparation of Hydrophilic Polyethylene/Methylcellulose Blend Microporous Membranes for Separator of Lithium-Ion Batteries,” Journal of Membrane Science 498 (2016):147–157.

[43] C. He, J. Liu, J. Cui, J. Li, and X. Wu, “A Gel Polymer Electrolyte Based on Polyacrylonitrile/Organic Montmorillonite Membrane Exhibiting Dense Structure for Lithium Ion Battery,” Solid State Ionics 315 (2018):102–110.

RIGHTS & PERMISSIONS

2024 The Author(s). Battery Energy published by Xijing University and John Wiley & Sons Australia, Ltd.