Amine-Based Chloroaluminate Ionic Liquids as Electrolytes for Aluminium Batteries: A Synthesis and Evaluation Study

Abstract

Amine-based chloroaluminate electrolytes were developed and assessed in this initial feasibility study, the first investigation of this family for aluminium batteries. Primary, secondary, and tertiary amines with different aliphatic chain lengths were evaluated as precursors. Electrochemical performance was measured by potentiometry, real time viscosity changes were probed with a quartz crystal resonator, and aluminium deposit morphology was characterised by optical and atomic force microscopy. Two systems emerged as promising. Triethylamine/AlCl₃ remained solid without additives up to 313 K. Under polarisation, quartz crystal resonator measurements showed a sharp, reversible decrease in effective viscosity near the electrode, consistent with a localised potential induced solid to liquid transition reported in ionic liquids, and an associated increase in ionic transport. Dodecylamine, AlCl₃ displayed an electrochemical stability window of approximately 1.5 V, comparable to electrolytes already explored for charge storage devices. Both electrolytes exhibited high Faradaic efficiency and redox reversibility, and produced smooth, uniform aluminium deposits. The distinctive features observed here motivate mechanistic studies, long term stability testing, and a systematic survey of amines to develop an optimal solid-state aluminium electrolyte for future devices.

References

[1] S. Wang, M. Bai, C. Liu, et al., “Highly Stretchable Multifunctional Polymer Ionic Conductor With High Conductivity Based on Organic-Inorganic Dual Networks,” Chemical Engineering Journal440 (2022): 135824.

[2] X. Dong, H. Chen, H. Lai, et al., “A Graphitized Expanded Graphite Cathode for Aluminum-Ion Battery With Excellent Rate Capability,” Journal of Energy Chemistry66 (2022): 38-44.

[3] T. Leisegang, F. Meutzner, M. Zschornak, et al., “The Aluminum-Ion Battery: A Sustainable and Seminal Concept?,” Frontiers in Chemistry7 (2019): 268, https://doi.org/10.3389/fchem.2019.00268.

[4] C. Exley, “A Biogeochemical Cycle for Aluminium?,” Journal of Inorganic Biochemistry97, no. 1 (2003): 1-7.

[5] J. Thonstad and S. Rolseth, “Alternative Electrolyte Compositions for Aluminium Electrolysis,” Mineral Processing and Extractive Metallurgy114, no. 3 (2005): 188-191.

[6] N. Zhu, K. Zhang, F. Wu, Y. Bai, and C. Wu, “Ionic Liquid-Based Electrolytes for Aluminum/Magnesium/Sodium-Ion Batteries,” Energy Material Advances2021 (2021): 9204217.

[7] K. V. Kravchyk and M. V. Kovalenko, “Aluminum Electrolytes for Al Dual-Ion Batteries,” Communications Chemistry3, no. 1 (2020): 120.

[8] T. Wei, Z. Wang, Q. Zhang, et al., “Metal–Organic Framework-Based Solid-State Electrolytes for All Solid-State Lithium Metal Batteries: A Review,” CrystEngComm24, no. 28 (2022): 5014-5030.

[9] Y. Xu, H. Zhang, F. Yang, et al., “State of Charge Estimation of Supercapacitors Based on Multi-Innovation Unscented Kalman Filter under a Wide Temperature Range,” International Journal of Energy Research46, no. 12 (2022): 16716-16735.

[10] Z. Huang, P. Luo, H. Zheng, and Z. Lyu, “Aluminum-Doping Effects on Three-Dimensional Li₃V₂(PO₄)₃@C/CNTs Microspheres for Electrochemical Energy Storage,” Ceramics International48, no. 13 (2022): 18765-18772.

[11] S. Arshadi Rastabi, G. Razaz, M. Hummelgård, et al., “Metallurgical Investigation of Aluminum Anode Behavior in Water-in-Salt Electrolyte for Aqueous Aluminum Batteries,” Journal of Power Sources523 (2022): 231066.

[12] K. K. Maniam and S. Paul, “A Review on the Electrodeposition of Aluminum and Aluminum Alloys in Ionic Liquids,” Coatings11, no. 1 (2021): 80.

[13] R. Böttcher, A. Ispas, and A. Bund, “Determination of Transport Parameters In [EMIm]Cl–Based Ionic Liquids – Diffusion and Electrical Conductivity,” Electrochimica Acta366 (2021): 137370.

[14] Y. Bian, Y. Li, Z. Yu, et al., “Using an AlCl3/Urea Ionic Liquid Analog Electrolyte for Improving the Lifetime of Aluminum-Sulfur Batteries,” ChemElectroChem5, no. 23 (2018): 3607-3611.

[15] M. Angell, C. J. Pan, Y. Rong, et al., “High Coulombic Efficiency Aluminum-Ion Battery Using an AlCl3-Urea Ionic Liquid Analog Electrolyte,” Proceedings of the National Academy of Sciences of the United States of America114, no. 5 (2017): 834-839.

[16] A. J. Lucio, I. Efimov, O. N. Efimov, et al., “Amidine-Based Ionic Liquid Analogues With AlCl3: A Credible New Electrolyte for Rechargeable Al Batteries,” Chemical Communications57, no. 77 (2021): 9834-9837.

[17] O. O. Okoturo and T. J. VanderNoot, “Temperature Dependence of Viscosity for Room Temperature Ionic Liquids,” Journal of Electroanalytical Chemistry568 (2004): 167-181.

[18] D.-Y. Wang, C. Y. Wei, M. C. Lin, et al., “Advanced Rechargeable Aluminium Ion Battery With a High-Quality Natural Graphite Cathode,” Nature Communications8, no. 1 (2017): 14283.

[19] X.-G. Sun, Y. Fang, X. Jiang, K. Yoshii, T. Tsuda, and S. Dai, “Polymer Gel Electrolytes for Application in Aluminum Deposition and Rechargeable Aluminum Ion Batteries,” Chemical Communications52, no. 2 (2016): 292-295.

[20] Á. Miguel, N. García, V. Gregorio, A. López-Cudero, and P. Tiemblo, “Tough Polymer Gel Electrolytes for Aluminum Secondary Batteries Based on Urea: AlCl₃, Prepared by a New Solvent-Free and Scalable Procedure,” Polymers12, no. 6 (2020): 1336.

[21] T. Schoetz, O. Leung, C. P. de Leon, C. Zaleski, and I. Efimov, “Aluminium Deposition in EMImCl-AlCl₃ Ionic Liquid and Ionogel for Improved Aluminium Batteries,” Journal of The Electrochemical Society167, no. 4 (2020): 040516.

[22] A. Lewandowski, “New Composite Solid Electrolytes Based on a Polymer and Ionic Liquids,” Solid State Ionics169, no. 1 (2004): 21-24.

[23] I. A. Menzies and D. B. Salt, “The Electrodeposition of Aluminium,” Transactions of the IMF43, no. 1 (1965): 186-191.

[24] N. Canever, N. Bertrand, and T. Nann, “Acetamide: A Low-Cost Alternative to Alkyl Imidazolium Chlorides for Aluminium-Ion Batteries,” Chemical Communications54, no. 83 (2018): 11725-11728.

[25] Z. Li, S. Weng, J. Fu, et al., “Nonflammable Quasi-Solid Electrolyte for Energy-Dense and Long-Cycling Lithium Metal Batteries With High-Voltage Ni-Rich Layered Cathodes,” Energy Storage Materials47 (2022): 542-550.

[26] Z. Huang, W. L. Song, Y. Liu, et al., “Stable Quasi-Solid-State Aluminum Batteries,” Advanced Materials34, no. 8 (2022): 2104557.

[27] W. Freyland, “Interfacial Phase Transitions in Conducting Fluids,” Physical Chemistry Chemical Physics10, no. 7 (2008): 923-936.

[28] M. A. Ploss, M. W. Rutland, and S. Glavatskih, “Influence of Electric Potential on the Apparent Viscosity of an Ionic Liquid: Facts and Artifacts,” Physical Chemistry Chemical Physics18, no. 38 (2016): 26609-26615.

[29] A. J. Lucio, I. Sumarlan, E. Bulmer, et al., “Measuring and Enhancing the Ionic Conductivity of Chloroaluminate Electrolytes for Al-Ion Batteries,” Journal of Physical Chemistry C127, no. 28 (2023): 13866-13876.

[30] A. Guha, N. Sandström, V. P. Ostanin, W. van der Wijngaart, D. Klenerman, and S. K. Ghosh, “Simple and Ultrafast Resonance Frequency and Dissipation Shift Measurements Using a Fixed Frequency Drive,” Sensors and Actuators B: Chemical281 (2019): 960-970.

[31] A. Kumar and D. Sarma, “Recent Applications of Chloroaluminate Ionic Liquids in Promoting Organic Reactions.” Ionic Liquids IIIB: Fundamentals, Progress, Challenges, and Opportunities (American Chemical Society, 2005), 350-370.

[32] G. Sauerbrey, “Verwendung Von Schwingquarzen Zur Wägung Dünner Schichten Und Zur Mikrowägung,” Zeitschrift für Physik155, no. 2 (1959): 206-222.

[33] M. Rodahl, F. Höök, and B. Kasemo, “QCM Operation in Liquids: An Explanation of Measured Variations in Frequency and Q Factor With Liquid Conductivity,” Analytical Chemistry68, no. 13 (1996): 2219-2227.

[34] K. Keiji Kanazawa and J. G. Gordon, “The Oscillation Frequency of a Quartz Resonator in Contact With Liquid,” Analytica Chimica Acta175 (1985): 99-105.

[35] Y. Long, H. Li, M. Ye, et al., “Suppressing Al Dendrite Growth Towards a Long-Life Al-Metal Battery,” Energy Storage Materials34 (2021): 194-202.

[36] X. Ke, Y. Wang, L. Dai, and C. Yuan, “Cell Failures of All-Solid-State Lithium Metal Batteries With Inorganic Solid Electrolytes: Lithium Dendrites,” Energy Storage Materials33 (2020): 309-328.

[37] J. W. Gibbs, K. A. Mohan, E. B. Gulsoy, et al., “The Three-Dimensional Morphology of Growing Dendrites,” Scientific Reports5, no. 1 (2015): 11824.

[38] J. Zheng, D. C. Bock, T. Tang, et al., “Regulating Electrodeposition Morphology in High-Capacity Aluminium and Zinc Battery Anodes Using Interfacial Metal–Substrate Bonding,” Nature Energy6, no. 4 (2021): 398-406.

[39] A. Hagopian, M.-L. Doublet, and J.-S. Filhol, “Thermodynamic Origin of Dendrite Growth in Metal Anode Batteries,” Energy & Environmental Science13, no. 12 (2020): 5186-5197.

[40] R. Zhang, G. van Straaten, V. di Palma, et al., “Electrochemical Activation of Atomic Layer-Deposited Cobalt Phosphate Electrocatalysts for Water Oxidation,” ACS Catalysis11, no. 5 (2021): 2774-2785.

[41] K. Hayamizu, Y. Aihara, H. Nakagawa, T. Nukuda, and W. S. Price, “Ionic Conduction and Ion Diffusion in Binary Room-Temperature Ionic Liquids Composed of [emim][BF4] and LiBF4,” Journal of Physical Chemistry B108, no. 50 (2004): 19527-19532.

[42] Q. Wang, Q. Zhang, X. Lu, and S. Zhang, “Electrodeposition of Al From Chloroaluminate Ionic Liquids With Different Cations,” Ionics23, no. 9 (2017): 2449-2455.

[43] D. R. MacFarlane, et al., “Energy Applications of Ionic Liquids,” Energy & Environmental Science7, no. 1 (2014): 232-250.

[44] K. L. Ng, B. Amrithraj, and G. Azimi, “Nonaqueous Rechargeable Aluminum Batteries,” Joule6, no. 1 (2022): 134-170.

[45] Y. Peng, P. S. Shinde, and R. G. Reddy, “Diffusion Coefficient and Nucleation Density Studies on Electrochemical Deposition of Aluminum From Chloroaluminate Ionic Liquid Electrolytes,” Journal of Electroanalytical Chemistry895 (2021): 115363.

[46] A. Abbott, J. C. Barron, M. Elhadi, et al., “Electrolytic Metal Coatings and Metal Finishing Using Ionic Liquids,” ECS Transactions16, no. 36 (2009): 47-63.

[47] M. Galiński, A. Lewandowski, and I. Stępniak, “Ionic Liquids as Electrolytes,” Electrochimica Acta51, no. 26 (2006): 5567-5580.

[48] V. A. Elterman, P. Y. Shevelin, L. A. Yolshina, and A. V. Borozdin, “Features of Aluminum Electrodeposition From 1,3-dialkylimidazolium Chloride Chloroaluminate Ionic Liquids,” Journal of Molecular Liquids351 (2022): 118693.

[49] M. González-Melchor, F. Bresme, and J. Alejandre, “Molecular Dynamics Simulations of the Surface Tension of Ionic Liquids,” Journal of Chemical Physics122, no. 10 (2005): 104710.

[50] C. Kolbeck, J. Lehmann, K. R. J. Lovelock, et al., “Density and Surface Tension of Ionic Liquids,” Journal of Physical Chemistry B114, no. 51 (2010): 17025-17036.

[51] J. Janek and W. G. Zeier, “A Solid Future for Battery Development,” Nature Energy1, no. 9 (2016): 16141.

[52] Z. Meng, Z. Qiu, Y. Shi, et al., “Micro/Nano Metal–Organic Frameworks Meet Energy Chemistry: A Review of Materials Synthesis and Applications,” eScience3, no. 2 (2023): 100092.

[53] Z. Hui, J. An, J. Zhou, W. Huang, and G. Sun, “Mechanisms for Self-Templating Design of Micro/Nanostructures Toward Efficient Energy Storage,” Exploration2, no. 5 (2022): 20210237.

[54] H. Song, Y. Wang, Q. Fei, D. H. Nguyen, C. Zhang, and T. Liu, “Cryopolymerization-Enabled Self-Wrinkled Polyaniline-Based Hydrogels for Highly Stretchable All-in-One Supercapacitors,” Exploration2, no. 4 (2022): 20220006.

[55] S. Wang, S. Xiao, S. Li, et al., “Organic Cationic-Coordinated Perfluoropolymer Electrolytes With Strong Li⁺-Solvent Interaction for Solid State Li-Metal Batteries,” Angewandte Chemie International Edition63, no. 52 (2024): e202412434, https://doi.org/10.1002/anie.202412434.

[56] L. Zhang, S. Wang, Q. Wang, H. Shao, and Z. Jin, “Dendritic Solid Polymer Electrolytes: A New Paradigm for High-Performance Lithium-Based Batteries,” Advanced Materials35, no. 35 (2023): 2303355.

[57] C. Liu, S. Wang, X. Wu, et al., “In Situ Construction of Zwitterionic Polymer Electrolytes With Synergistic Cation–Anion Regulation Functions for Lithium Metal Batteries,” Advanced Functional Materials34, no. 1 (2024): 2307248.

RIGHTS & PERMISSIONS

2025 The Author(s). Battery Energy published by Xijing University and John Wiley & Sons Australia, Ltd.