Recent Advances in Achieving High Energy/Power Density of Lithium-Sulfur Batteries for Current and Near-Future Applications

Abstract

Although lithium-sulfur batteries (LSBs) are promising next-generation secondary batteries, their mass commercialization has not yet been achieved primarily owing to critical issues such as the “shuttle effect” of soluble lithium polysulfides (LiPSs) and uncontrollable Li dendrite growth. Thus, most reviews on LSBs are focused on strategies for inhibiting shuttle behavior and achieving dendrite-free LSBs to improve the cycle life and Coulombic efficiency of LSBs. However, LSBs have various promising advantages, including an ultrahigh energy density (2600 Wh kg⁻¹), cost-effectiveness, environmental friendliness, low weight, and flexible attributes, which suggest the feasibility of their current and near-future practical applications in fields that require these characteristics, irrespective of their moderate lifespan. Here, for the first time, challenges impeding the current and near-future applications of LSBs are comprehensively addressed. In particular, the latest progress and novel materials based on their electrochemical characteristics are summarized, with a focus on the gravimetric/volumetric energy density (capacity), loading mass and sulfur content in cathodes, electrolyte-to-sulfur ratios, rate capability, and maximization of these advantageous characteristics for applications in specific areas. Additionally, potential areas for practical applications of LSBs are suggested, with insights for improving LSB performances from a different standpoint and facilitating their integration into various application domains.

Keywords

energy density / lightweight battery / lithium-sulfur battery / next-generation battery / power density

References

[1] R. Moshtev and B. Johnson, “State of the Art of Commercial Li Ion Batteries,” Journal of Power Sources 91, no. 2 (2000): 86-91.

[2] A. Barré, B. Deguilhem, S. Grolleau, M. Gérard, F. Suard, and D. Riu, “A Review on Lithium-Ion Battery Ageing Mechanisms and Estimations for Automotive Applications,” Journal of Power Sources 241 (2013): 680-689.

[3] B. Scrosati, J. Hassoun, and Y.-K. Sun, “Lithium-Ion Batteries. A Look Into the Future,” Energy & Environmental Science 4, no. 9 (2011): 3287-3295.

[4] B. A. Johnson and R. E. White, “Characterization of Commercially Available Lithium-Ion Batteries,” Journal of Power Sources 70, no. 1 (1998): 48-54.

[5] G. E. Blomgren, “The Development and Future of Lithium Ion Batteries,” Journal of the Electrochemical Society 164, no. 1 (2016): A5019-A5025.

[6] A. Mishrif and A. Khan, Clean Energy Transition Through the Sustainable Exploration and Use of Lithium in Oman: Potential and Challenges,” Sustainability 15, no. 20 (2023): 15173.

[7] Y. Zhao, O. Pohl, A. I. Bhatt, et al., “A Review on Battery Market Trends, Second-Life Reuse, and Recycling,” Sustainable Chemistry 2, no. 1 (2021): 167-205.

[8] J. Xiao, Q. Li, Y. Bi, et al., “Understanding and Applying Coulombic Efficiency in Lithium Metal Batteries,” Nature Energy 5, no. 8 (2020): 561-568.

[9] J. Liu, Z. Bao, Y. Cui, et al., “Pathways for Practical High-Energy Long-Cycling Lithium Metal Batteries,” Nature Energy 4, no. 3 (2019): 180-186.

[10] B. Liu, J.-G. Zhang, and W. Xu, “Advancing Lithium Metal Batteries,” Joule 2, no. 5 (2018): 833-845.

[11] J.-H. Kang, J. Lee, J. W. Jung, et al., “Lithium-Air Batteries: Air-Breathing Challenges and Perspective,” ACS Nano 14, no. 11 (2020): 14549-14578.

[12] T. Bai, D. Li, S. Xiao, et al., “Recent Progress on Single-Atom Catalysts for Lithium-Air Battery Applications,” Energy & Environmental Science 16, no. 4 (2023): 1431-1465.

[13] G. Girishkumar, B. McCloskey, A. C. Luntz, S. Swanson, and W. Wilcke, “Lithium− Air Battery: Promise and Challenges,” Journal of Physical Chemistry Letters 1, no. 14 (2010): 2193-2203.

[14] K. Matsumoto, J. Hwang, S. Kaushik, et al., “Advances in Sodium Secondary Batteries Utilizing Ionic Liquid Electrolytes,” Energy & Environmental Science 12, no. 11 (2019): 3247-3287.

[15] J. M. Lee, G. Singh, W. Cha, et al., “Recent Advances in Developing Hybrid Materials for Sodium-Ion Battery Anodes,” ACS Energy Letters 5, no. 6 (2020): 1939-1966.

[16] K. M. Abraham, “How Comparable Are Sodium-Ion Batteries to Lithium-Ion Counterparts?,” ACS Energy Letters 5, no. 11 (2020): 3544-3547.

[17] A. Bhargav, J. He, A. Gupta, and A. Manthiram, “Lithium-Sulfur Batteries: Attaining the Critical Metrics,” Joule 4, no. 2 (2020): 285-291.

[18] G. Zhou, H. Chen, and Y. Cui, “Formulating Energy Density for Designing Practical Lithium-Sulfur Batteries,” Nature Energy 7, no. 4 (2022): 312-319.

[19] Y. Chen, T. Wang, H. Tian, D. Su, Q. Zhang, and G. Wang, “Advances in Lithium-Sulfur Batteries: From Academic Research to Commercial Viability,” Advanced Materials 33, no. 29 (2021): 2003666.

[20] Y. Hu, W. Chen, T. Lei, et al., “Strategies Toward High-Loading Lithium-Sulfur Battery,” Advanced Energy Materials 10, no. 17 (2020): 2000082.

[21] N. Nakamura, S. Ahn, T. Momma, and T. Osaka, “Future Potential for Lithium-Sulfur Batteries,” Journal of Power Sources 558 (2023): 232566.

[22] J. E. Knoop and S. Ahn, “Recent Advances in Nanomaterials for High-performance Li-S Batteries,” Journal of Energy Chemistry 47 (2020): 86-106.

[23] J. Sung, J. Heo, D.-H. Kim, et al., “Recent Advances in All-Solid-State Batteries for Commercialization,” Materials Chemistry Frontiers 8 (2024): 1861.

[24] Y. Chen, T. Wang, H. Tian, et al., “Advances in Lithium-Sulfur Batteries: From Academic Research to Commercial Viability,” Advanced Materials 33, no. 29 (2021): 2003666.

[25] G. Liu, Q. Sun, J. Zhang, et al., “Electrolyte Issues in Lithium-Sulfur Batteries: Development, Prospect, and Challenges,” Energy & Fuels 35, no. 13 (2021): 10405-10427.

[26] Y.-H. Liu, C. Y. Wang, S. L. Yang, F. F. Cao, and H. Ye, “3D Mxene Architectures as Sulfur Hosts for High-Performance Lithium-Sulfur Batteries,” Journal of Energy Chemistry 66 (2022): 429-439.

[27] W. Xu, X. Pan, X. Meng, et al., “A Conductive Sulfur-Hosting Material Involving Ultrafine Vanadium Nitride Nanoparticles for High-Performance Lithium-Sulfur Battery,” Electrochimica Acta 331 (2020): 135287.

[28] Y. Xie, J. Cao, X. Wang, et al., “Mof-Derived Bifunctional Co_{0. 85}Se Nanoparticles Embedded in N-Doped Carbon Nanosheet Arrays as Efficient Sulfur Hosts for Lithium-Sulfur Batteries,” Nano Letters 21, no. 20 (2021): 8579-8586.

[29] M. Du, P. Geng, C. Pei, et al., “High-Entropy Prussian Blue Analogues and Their Oxide Family as Sulfur Hosts for Lithium-Sulfur Batteries,” Angewandte Chemie International Edition 61, no. 41 (2022): e202209350.

[30] R. Liu, W. Liu, Y. Bu, et al., “Conductive Porous Laminated Vanadium Nitride as Carbon-Free Hosts for High-Loading Sulfur Cathodes in Lithium-Sulfur Batteries,” ACS Nano 14, no. 12 (2020): 17308-17320.

[31] J. Wang, G. Li, D. Luo, et al., “Engineering the Conductive Network of Metal Oxide-Based Sulfur Cathode Toward Efficient and Longevous Lithium-Sulfur Batteries,” Advanced Energy Materials 10, no. 41 (2020): 2002076.

[32] Y. Li, J. G. Shapter, H. Cheng, G. Xu, and G. Gao, “Recent Progress in Sulfur Cathodes for Application to Lithium-Sulfur Batteries,” Particuology 58 (2021): 1-15.

[33] D. He, J. Meng, X. Chen, et al., “Ultrathin Conductive Interlayer With High-Density Antisite Defects for Advanced Lithium-Sulfur Batteries,” Advanced Functional Materials 31, no. 2 (2021): 2001201.

[34] H. Xiang, N. Deng, H. Zhao, et al., “A Review on Electronically Conducting Polymers for Lithium-Sulfur Battery and Lithium-Selenium Battery: Progress and Prospects,” Journal of Energy Chemistry 58 (2021): 523-556.

[35] L. Huang, J. Li, B. Liu, et al., “Electrode Design for Lithium-Sulfur Batteries: Problems and Solutions,” Advanced Functional Materials 30, no. 22 (2020): 1910375.

[36] Y. Fu, Z. Wu, Y. Yuan, et al., “Switchable Encapsulation of Polysulfides in the Transition Between Sulfur and Lithium Sulfide,” Nature Communications 11, no. 1 (2020): 845.

[37] X. Gao, X. Zheng, J. Wang, et al., “Incorporating the Nanoscale Encapsulation Concept From Liquid Electrolytes Into Solid-State Lithium-Sulfur Batteries,” Nano Letters 20, no. 7 (2020): 5496-5503.

[38] H. Chen, W. D. Dong, F. J. Xia, et al., “Hollow Nitrogen-Doped Carbon/Sulfur@ MnO₂ Nanocomposite With Structural and Chemical Dual-Encapsulation for Lithium-Sulfur Battery,” Chemical Engineering Journal 381 (2020): 122746.

[39] F. Xiao, X. Yang, H. Wang, et al., “Covalent Encapsulation of Sulfur in a Mof-Derived S, N-Doped Porous Carbon Host Realized via the Vapor-Infiltration Method Results in Enhanced Sodium-Sulfur Battery Performance,” Advanced Energy Materials 10, no. 23 (2020): 2000931.

[40] S. Li and Z. Fan, “Encapsulation Methods of Sulfur Particles for Lithium-Sulfur Batteries: A Review,” Energy Storage Materials 34 (2021): 107-127.

[41] Y. Yang, H. Yang, X. Wang, Y. Bai, and C. Wu, “Multivalent Metal-Sulfur Batteries for Green and Cost-Effective Energy Storage: Current Status and Challenges,” Journal of Energy Chemistry 64 (2022): 144-165.

[42] Y. Deng, J. Li, T. Li, X. Gao, and C. Yuan, “Life Cycle Assessment of Lithium Sulfur Battery for Electric Vehicles,” Journal of Power Sources 343 (2017): 284-295.

[43] Y. Ye, J. Zhang, S. Pilla, A. M. Rao, and B. Xu, “Application of a New Type of Lithium‑Sulfur Battery and Reinforcement Learning in Plug-In Hybrid Electric Vehicle Energy Management,” Journal of Energy Storage 59 (2023): 106546.

[44] X. Ji, K. T. Lee, and L. F. Nazar, “A Highly Ordered Nanostructured Carbon-Sulphur Cathode for Lithium-Sulphur Batteries,” Nature Materials 8, no. 6 (2009): 500-506.

[45] X. Liang, C. Hart, Q. Pang, A. Garsuch, T. Weiss, and L. F. Nazar, “A Highly Efficient Polysulfide Mediator for Lithium-Sulfur Batteries,” Nature Communications 6, no. 1 (2015): 5682.

[46] Q. Pang, D. Kundu, M. Cuisinier, and L. F. Nazar, “Surface-Enhanced Redox Chemistry of Polysulphides on a Metallic and Polar Host for Lithium-Sulphur Batteries,” Nature Communications 5, no. 1 (2014): 4759.

[47] J. Sun, T. Wang, Y. Gao, et al., “Will Lithium-Sulfur Batteries be the Next Beyond-Lithium Ion Batteries and Even Much Better?,” InforMat 4, no. 9 (2022): e12359.

[48] W. Jan, A. D. Khan, F. J. Iftikhar, and G. Ali, “Recent Advancements and Challenges in Deploying Lithium Sulfur Batteries as Economical Energy Storage Devices,” Journal of Energy Storage 72 (2023): 108559.

[49] W. Yao, J. Xu, L. Ma, et al., “Recent Progress for Concurrent Realization of Shuttle-Inhibition and Dendrite-Free Lithium-Sulfur Batteries,” Advanced Materials 35, no. 32 (2023): 2212116.

[50] L. Zhou, D. L. Danilov, F. Qiao, et al., “Sulfur Reduction Reaction in Lithium-Sulfur Batteries: Mechanisms, Catalysts, and Characterization,” Advanced Energy Materials 12, no. 44 (2022): 2202094.

[51] S. Jo, J. W. Hong, T. Momma, et al., “Facile One-Pot Synthesis of Biomass-Derived Activated Carbon as an Interlayer Material for a BAC/PE/Al₂O₃ Dual Coated Separator in Li-S Batteries,” RSC Advances 13, no. 39 (2023): 27274-27282.

[52] M. Yan, W. P. Wang, Y. X. Yin, L. J. Wan, and Y. G. Guo, “Interfacial Design for Lithium-Sulfur Batteries: From Liquid to Solid,” EnergyChem 1, no. 1 (2019): 100002.

[53] C. Wang, R. Liu, W. Liu, et al., “Porous Carbon Cloth@ CoSe₂ as Kinetics-Enhanced and High-Loading Integrated Sulfur Host for Lithium-Sulfur Batteries,” Advanced Functional Materials 34 (2024): 2316221.

[54] M. Wang, L. Fan, X. Sun, et al., “Nitrogen-Doped CoSe₂ as a Bifunctional Catalyst for High Areal Capacity and Lean Electrolyte of Li-S Battery,” ACS Energy Letters 5, no. 9 (2020): 3041-3050.

[55] Z. Ye, Y. Jiang, L. Li, F. Wu, and R. Chen, “Self-Assembly of 0D-2D Heterostructure Electrocatalyst From MOF and MXene for Boosted Lithium Polysulfide Conversion Reaction,” Advanced Materials 33, no. 33 (2021): 2101204.

[56] Y. Zhang, W. Wang, Z. Jia, et al., “Dual-Stage Polyporate Framework With Redox Mediator for High Loading Lithium Sulfur Batteries,” Energy Storage Materials 67 (2024): 103320.

[57] X. He, X. Geng, C. Wang, et al., “Interweaving 3D Ion-Conductive Network Binder for High-Loading and Lean-Electrolyte Lithium-Sulfur Batteries,” Journal of Materials Chemistry A (2024): 11038.

[58] H. Sul, D. Lee, and A. Manthiram, “High-Loading Lithium-Sulfur Batteries With Solvent-Free Dry-Electrode Processing,” Small 20 (2024): 2400728.

[59] H. Ma, Z. Yu, H. Li, et al., “Tandem Carbon Hollow Spheres With Tailored Inner Structure as Sulfur Immobilization for Superior Lithium-Sulfur Batteries,” Advanced Functional Materials 34, no. 12 (2024): 2310301.

[60] L. Ren, L. Qiao, A. H. Pato, et al., “Suppression of Long-Chain Lithium Polysulfide Formation Through a Selenium-Doped Linear Sulfur Copolymer Cathode for High-Performance Lithium-Organosulfur Batteries,” Journal of Materials Chemistry A 12, no. 7 (2024): 4249-4257.

[61] Y. Zhang, H. W. Song, K. R. Crompton, X. Yang, K. Zhao, and S. Lee, “A Sulfur Cathode Design Strategy for Polysulfide Restrictions and Kinetic Enhancements in Li-S Batteries Through Oxidative Chemical Vapor Deposition,” Nano Energy 115 (2023): 108756.

[62] C.-C. Wu and S.-H. Chung, “Material, Configuration, and Fabrication Designs for Lean-Electrolyte Lithium-Sulfur Cell With a High-Loading Sulfur Cathode,” Journal of Power Sources 566 (2023): 232944.

[63] Z. Wang, C. Song, H. Shen, S. Ma, G. Li, and Y. Li, “RuOx Quantum Dots Loaded on Graphdiyne for High-Performance Lithium-Sulfur Batteries,” Advanced Materials 36, no. 9 (2024): 2307786.

[64] X. Liu, J. Wang, W. Wang, et al., “Interfacial Synergy in Mo₂C/MoC Heterostructure Promoting Sequential Polysulfide Conversion in High-Performance Lithium-Sulfur Battery,” Small 20, no. 12 (2024): 2307902.

[65] M. Ahmad, A. Inayat, M. N. Hussain, et al., “Graphene Supported In₂S₃ Nanostructure as Electrode Material for Lithium Sulfur Batteries and Supercapacitors,” Materials Today Sustainability 25 (2024): 100631.

[66] B. Yue, L. Wang, N. Zhang, et al., “Dual-Confinement Effect of Nanocages@ Nanotubes Suppresses Polysulfide Shuttle Effect for High-Performance Lithium-Sulfur Batteries,” Small 20, no. 16 (2024): 2308603.

[67] G. Hou, C. Ci, H. Guo, et al., “Facile Construction of a Hybrid Artificial Protective Layer for Stable Lithium Metal Anode,” Chemical Engineering Journal 391 (2020): 123542.

[68] T. Liu, J. Ge, Y. Xu, L. P. Lv, W. Sun, and Y. Wang, “Organic Supramolecular Protective Layer With Rearranged and Defensive Li Deposition for Stable and Dendrite-Free Lithium Metal Anode,” Energy Storage Materials 32 (2020): 261-271.

[69] Y. Liang, Y. Xiao, C. Yan, et al., “A Bifunctional Ethylene-Vinyl Acetate Copolymer Protective Layer for Dendrites-Free Lithium Metal Anodes,” Journal of Energy Chemistry 48 (2020): 203-207.

[70] G. Hou, C. Ci, D. Salpekar, et al., “Stable Lithium Metal Anode Enabled by an Artificial Multi-Phase Composite Protective Film,” Journal of Power Sources 448 (2020): 227547.

[71] M. Wang, X. Cheng, T. Cao, et al., “Constructing Ultrathin TiO₂ Protection Layers via Atomic Layer Deposition for Stable Lithium Metal Anode Cycling,” Journal of Alloys and Compounds 865 (2021): 158748.

[72] S. Guo, L. Wang, Y. Jin, et al., “A Polymeric Composite Protective Layer for Stable Li Metal Anodes,” Nano Convergence 7 (2020): 21.

[73] E. K. Jang, J. Ahn, S. Yoon, and K. Y. Cho, “High Dielectric, Robust Composite Protective Layer for Dendrite-Free and LiPF₆ Degradation-Free Lithium Metal Anode,” Advanced Functional Materials 29, no. 48 (2019): 1905078.

[74] H. Chen, A. Pei, D. Lin, et al., “Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode,” Advanced Energy Materials 9, no. 22 (2019): 1900858.

[75] C. Yan, X. B. Cheng, Y. Tian, et al., “Dual-Layered Film Protected Lithium Metal Anode to Enable Dendrite-Free Lithium Deposition,” Advanced Materials 30, no. 25 (2018): 1707629.

[76] C. Chen, J. Guan, N. W. Li, et al., “Lotus-Root-Like Carbon Fibers Embedded With Ni-Co Nanoparticles for Dendrite-Free Lithium Metal Anodes,” Advanced Materials 33, no. 24 (2021): 2100608.

[77] Y. Chen, X. Ke, Y. Cheng, et al., “Boosting the Electrochemical Performance of 3D Composite Lithium Metal Anodes Through Synergistic Structure and Interface Engineering,” Energy Storage Materials 26 (2020): 56-64.

[78] C. Yang, B. Liu, F. Jiang, et al., “Garnet/Polymer Hybrid Ion-Conducting Protective Layer for Stable Lithium Metal Anode,” Nano Research 10 (2017): 4256-4265.

[79] Z. Wang, Z. Sun, J. Li, et al., “Insights Into the Deposition Chemistry of Li Ions in Nonaqueous Electrolyte for Stable Li Anodes,” Chemical Society Reviews 50, no. 5 (2021): 3178-3210.

[80] W. Guo, S. Liu, X. Guan, X. Zhang, X. Liu, and J. Luo, “Mixed Ion and Electron-Conducting Scaffolds for High-Rate Lithium Metal Anodes,” Advanced Energy Materials 9, no. 20 (2019): 1900193.

[81] S. Xia, X. Zhang, C. Liang, Y. Yu, and W. Liu, “Stabilized Lithium Metal Anode by an Efficient Coating for High-Performance Li-S Batteries,” Energy Storage Materials 24 (2020): 329-335.

[82] E. Cha, M. D. Patel, J. Park, et al., “2D MoS₂ as an Efficient Protective Layer for Lithium Metal Anodes in High-Performance Li-S Batteries,” Nature Nanotechnology 13, no. 4 (2018): 337-344.

[83] J. Gu, C. Shen, Z. Fang, et al., “Toward High-Performance Li Metal Anode via Difunctional Protecting Layer,” Frontiers in Chemistry 7 (2019): 572.

[84] M. Khan, M. N. Tahir, S. F. Adil, et al., “Graphene Based Metal and Metal Oxide Nanocomposites: Synthesis, Properties and Their Applications,” Journal of Materials Chemistry A 3, no. 37 (2015): 18753-18808.

[85] X. Q. Zhang, X. Chen, R. Xu, et al., “Columnar Lithium Metal Anodes,” Angewandte Chemie 129, no. 45 (2017): 14395-14399.

[86] L. Luo and A. Manthiram, “An Artificial Protective Coating Toward Dendrite-Free Lithium-Metal Anodes for Lithium-Sulfur Batteries,” Energy Technology 8, no. 7 (2020): 2000348.

[87] W. Guo, Q. Han, J. Jiao, et al., “In Situ Construction of Robust Biphasic Surface Layers on Lithium Metal for Lithium-Sulfide Batteries With Long Cycle Life,” Angewandte Chemie 133, no. 13 (2021): 7343-7350.

[88] C. Cui, R. Zhang, C. Fu, et al., “Stabilizing Lithium Metal Anode Enabled by a Natural Polymer Layer for Lithium-Sulfur Batteries,” ACS Applied Materials & Interfaces 13, no. 24 (2021): 28252-28260.

[89] Y. X. Yao, X. Q. Zhang, B. Q. Li, et al., “A Compact Inorganic Layer for Robust Anode Protection in Lithium-Sulfur Batteries,” InfoMat 2, no. 2 (2020): 379-388.

[90] Z. Wang, B. Al Alwan, and K. Y. Simon Ng, “Multi-Functions of Amino Thiophenol Additives for Shielding Lithium Metal Anode in Advanced Li-S Battery,” Materials Science and Engineering: B 297 (2023): 116727.

[91] Q. Jin, K. Zhao, L. Li, et al., “Tailoring the Spatial Distribution and Content of Inorganic Nitrides in Solid-Electrolyte Interphases for the Stable Li Anode in Li-S Batteries,” Energy & Environmental Materials 5, no. 4 (2022): 1180-1188.

[92] J. Tan, X. Li, Z. Fang, et al., “Integrating LIF-Rich Solid Electrolyte Interphase and In-Situ Formed Gel Blocking Layer for Li-S Battery,” Journal of Power Sources 548 (2022): 232035.

[93] C. Cui, R. Zhang, C. Fu, et al., “Stable Lithium Anode Enabled by Biphasic Hybrid Sei Layer Toward High-Performance Lithium Metal Batteries,” Chemical Engineering Journal 433 (2022): 133570.

[94] C. Cui, R. Zhang, C. Fu, et al., “An Armor-Like Artificial Solid Electrolyte Interphase Layer for High Performance Lithium-Sulfur Batteries,” Applied Materials Today 24 (2021): 101108.

[95] Z. Wang, Y. Wang, Z. Zhang, et al., “Building Artificial Solid-Electrolyte Interphase With Uniform Intermolecular Ionic Bonds Toward Dendrite-Free Lithium Metal Anodes,” Advanced Functional Materials 30, no. 30 (2020): 2002414.

[96] Q. Wang, J. Wan, X. Cao, et al., “Organophosphorus Hybrid Solid Electrolyte Interphase Layer Based on LixPO₄ Enables Uniform Lithium Deposition for High-Performance Lithium Metal Batteries,” Advanced Functional Materials 32, no. 2 (2022): 2107923.

[97] S. Ni, M. Zhang, C. Li, et al., “A 3D Framework With Li₃N-Li₂S Solid Electrolyte Interphase and Fast Ion Transfer Channels for a Stabilized Lithium-Metal Anode,” Advanced Materials 35, no. 8 (2023): 2209028.

[98] L. Li, Y. Luo, Y. Wang, Z. Zhang, F. Wu, and J. Li, “Rational Design of a Well-Aligned Metal-Organic Framework Nanopillar Array for Superior Lithium-Sulfur Batteries,” Chemical Engineering Journal 454 (2023): 140043.

[99] S.-K. Lee, S. M. Oh, E. Park, et al., “Highly Cyclable Lithium-Sulfur Batteries With a Dual-Type Sulfur Cathode and a Lithiated Si/SiO_x Nanosphere Anode,” Nano Letters 15, no. 5 (2015): 2863-2868.

[100] M. Liu, Y. X. Ren, H. R. Jiang, C. Luo, F. Y. Kang, and T. S. Zhao, “An Efficient Li₂S-based Lithium-Ion Sulfur Battery Realized by a Bifunctional Electrolyte Additive,” Nano Energy 40 (2017): 240-247.

[101] S. Liu, J. Guo, L. Zhao, W. Kong, W. Li, and Z. Wen, “Construction of Vacancy-Enriched Si@ Mn₃O₄-MnS/C Heterostructure Toward Endurable Anode for Lithium-Ion Batteries,” Materials Letters 354 (2024): 135434.

[102] S. Luo, F. Wu, and G. Yushin, “Strategies for Fabrication, Confinement and Performance Boost of Li₂S in Lithium-Sulfur, Silicon-Sulfur & Related Batteries,” Materials Today 49 (2021): 253-270.

[103] Y. Yuan, F. Wu, Y. Bai, et al., “Regulating Li Deposition by Constructing Lif-Rich Host for Dendrite-Free Lithium Metal Anode,” Energy Storage Materials 16 (2019): 411-418.

[104] M. Alidoost, A. Mangini, F. Caldera, et al., “Micro-Mesoporous Carbons From Cyclodextrin Nanosponges Enabling High-Capacity Silicon Anodes and Sulfur Cathodes for Lithiated Si-S Batteries,” Chemistry—A European Journal 28, no. 6 (2022): e202104201.

[105] V. Marangon, C. Hernández-Rentero, M. Olivares-Marín, et al., “A Stable High-Capacity Lithium-Ion Battery Using a Biomass-Derived Sulfur-Carbon Cathode and Lithiated Silicon Anode,” Chemsuschem 14, no. 16 (2021): 3333-3343.

[106] W. Chen, Y. Liao, K. Chen, et al., “Stable and High-Rate Silicon Anode Enabled by Artificial Poly (Acrylonitrile)-Sulfur Interface Engineering for Advanced Lithium-Ion Batteries,” Journal of Electroanalytical Chemistry 929 (2023): 117093.

[107] P. Wang, C. Xia, J. Yang, et al., “High-Energy Silicon-Sulfurized Poly (Acrylonitrile) Battery Based on a Nitrogen Evolution Reaction,” Science Bulletin 67, no. 3 (2022): 256-262.

[108] F. Ye, H. Noh, H. Lee, and H. T. Kim, “An Ultrahigh Capacity Graphite/Li₂S Battery With Holey-Li₂S Nanoarchitectures,” Advanced Science 5, no. 7 (2018): 1800139.

[109] R. Wang, H. Wang, H. Zhao, et al., “Highly Fluorinated Co-Solvent Enabling Ether Electrolyte for High-Voltage Lithium ion Batteries With Graphite Anode,” Energy Materials 3 (2023): 300040.

[110] S. Chen, Z. Yu, M. L. Gordin, R. Yi, J. Song, and D. Wang, “A Fluorinated Ether Electrolyte Enabled High Performance Prelithiated Graphite/Sulfur Batteries,” ACS Applied Materials & Interfaces 9, no. 8 (2017): 6959-6966.

[111] Y. Shen, J. Zhang, Y. Pu, et al., “Effective Chemical Prelithiation Strategy for Building a Silicon/Sulfur Li-Ion Battery,” ACS Energy Letters 4, no. 7 (2019): 1717-1724.

[112] N. Wang, N. Zhao, C. Shi, et al., “In Situ Synthesized Li₂S@ Porous Carbon Cathode for Graphite/Li₂S Full Cells Using Ether-Based Electrolyte,” Electrochimica Acta 256 (2017): 348-356.

[113] Z. Li, S. Zhang, S. Terada, et al., “Promising Cell Configuration for Next-Generation Energy Storage: Li₂S/Graphite Battery Enabled by a Solvate Ionic Liquid Electrolyte,” ACS Applied Materials & Interfaces 8, no. 25 (2016): 16053-16062.

[114] X. Pu, G. Yang, and C. Yu, “Safe and Reliable Operation of Sulfur Batteries With Lithiated Silicon,” Nano Energy 9 (2014): 318-324.

[115] J. Balach, T. Jaumann, and L. Giebeler, “Nanosized Li₂S-Based Cathodes Derived From MoS₂ for High-Energy Density Li-S Cells and Si-Li₂S Full Cells in Carbonate-Based Electrolyte,” Energy Storage Materials 8 (2017): 209-216.

[116] B. Li, S. Li, J. Xu, et al., “A New Configured Lithiated Silicon-Sulfur Battery Built on 3D Graphene With Superior Electrochemical Performances,” Energy & Environmental Science 9, no. 6 (2016): 2025-2030.

[117] Z. Li, Q. He, C. Zhou, et al., “Rationally Design Lithiophilic Surfaces Toward High−Energy Lithium Metal Battery,” Energy Storage Materials 37 (2021): 40-46.

[118] M. Piwko, T. Kuntze, S. Winkler, et al., “Hierarchical Columnar Silicon Anode Structures for High Energy Density Lithium Sulfur Batteries,” Journal of Power Sources 351 (2017): 183-191.

[119] J. Gao, C. Chen, Q. Dong, et al., “Stamping Flexible Li Alloy Anodes,” Advanced Materials 33, no. 11 (2021): 2005305.

[120] S. Huang, K. Long, Y. Chen, et al., “In Situ Formed Tribofilms as Efficient Organic/Inorganic Hybrid Interlayers for Stabilizing Lithium Metal Anodes,” Nano-Micro Letters 15, no. 1 (2023): 235.

[121] S. Huang, Z. Wu, B. Johannessen, et al., “Interfacial Friction Enabling ≤ 20 μm Thin Free-Standing Lithium Strips for Lithium Metal Batteries,” Nature Communications 14, no. 1 (2023): 5678.

[122] J. Chen, J. Xiang, X. Chen, L. Yuan, Z. Li, and Y. Huang, “Li₂S-Based Anode-Free Full Batteries With Modified Cu Current Collector,” Energy Storage Materials 30 (2020): 179-186.

[123] Y. Zhao, H. Ye, H. Zhang, D. Zhao, L. Huang, and J. Y. Lee, “The Beneficial Effects of Black Phosphorous Modification of the Anode Current Collector in Li-Metal Free Li₂S-Based Batteries,” Materials Today Energy 30 (2022): 101179.

[124] S. Nanda, A. Bhargav, and A. Manthiram, “Anode-Free, Lean-Electrolyte Lithium-Sulfur Batteries Enabled by Tellurium-Stabilized Lithium Deposition,” Joule 4, no. 5 (2020): 1121-1135.

[125] H. Sul, J. He, and A. Manthiram, “Tellurium Nanowires for Lithium-Metal Anode Stabilization in High-Performance Anode-Free Li-S Batteries,” Small Science 3, no. 10 (2023): 2300088.

[126] Y. Ren, A. Bhargav, W. Shin, H. Sul, and A. Manthiram, “Anode-Free Lithium-Sulfur Cells Enabled by Rationally Tuning Lithium Polysulfide Molecules,” Angewandte Chemie International Edition 61, no. 35 (2022): e202207907.

[127] H. Asano, J. Liu, K. Ueno, et al., “Enhancing the Reversibility of Li Deposition/Dissolution in Sulfur Batteries Using High-Concentration Electrolytes to Develop Anode-Less Batteries With Lithium Sulfide Cathode,” Journal of Power Sources 554 (2023): 232323.

[128] Y. Liu, X. Meng, Z. Wang, and J. Qiu, “Development of Quasi-Solid-State Anode-Free High-Energy Lithium Sulfide-Based Batteries,” Nature Communications 13, no. 1 (2022): 4415.

[129] J.-W. Park, S. C. Jo, M. J. Kim, et al., “Flexible High-Energy-Density Lithium-Sulfur Batteries Using Nanocarbon-Embedded Fibrous Sulfur Cathodes and Membrane Separators,” NPG Asia Materials 13, no. 1 (2021): 30.

[130] S. C. Jo, J. W. Hong, I. H. Choi, et al., “Multimodal Capturing of Polysulfides by Phosphorus-Doped Carbon Composites for Flexible High-Energy-Density Lithium-Sulfur Batteries,” Small 18, no. 21 (2022): 2200326.

[131] F. Yu, W. Tang, J. Liu, M. Geng, and H. Yang, “The Synergistic Adsorption-Catalysis Research of Highly Efficient Interlayer Constructed From Coal Fly Ash for Superior Lithium-Sulfur Batteries,” Chemical Engineering Journal 465 (2023): 142795.

[132] J. Zhou, C. Zhang, C. Xie, et al., “A Low-Cost Al(OH)₃-Modified Fire-Retardant and Shuttle-Limiting Separator for Safe and Stable Lithium-Sulfur Batteries,” Advanced Energy Materials 14, no. 3 (2024): 2303063.

[133] H. Xu, Q. Jiang, K. S. Hui, et al., “Interfacial “Double-Terminal Binding Sites” Catalysts Synergistically Boosting the Electrocatalytic Li₂S Redox for Durable Lithium-Sulfur Batteries,” ACS Nano 18, no. 12 (2024): 8839-8852.

[134] H. Gu, W. Yue, J. Hu, et al., “Asymmetrically Coordinated Cu-N1C₂ Single-Atom Catalyst Immobilized on Ti₃C₂T_x MXene as Separator Coating for Lithium-Sulfur Batteries,” Advanced Energy Materials 13, no. 20 (2023): 2204014.

[135] Q. Wang, S. Qiao, C. Huang, et al., “Multi-Heterostructured MXene/NiS₂/Co₃S₄ With S-Vacancies to Promote Polysulfide Conversion in Lithium-Sulfur Batteries,” ACS Applied Materials & Interfaces 16 (2024): 24502.

[136] F. Ma, Z. Chen, K. Srinivas, et al., “VN Quantum Dots Anchored N-Doped Carbon Nanosheets as Bifunctional Interlayer for High-Performance Lithium-Metal and Lithium-Sulfur Batteries,” Chemical Engineering Journal 459 (2023): 141526.

[137] Y. Lv, L. Bai, Q. Jin, et al., “VSe₂/V₂C Heterocatalyst With Built-In Electric Field for Efficient Lithium-Sulfur Batteries: Remedies Polysulfide Shuttle and Conversion Kinetics,” Journal of Energy Chemistry 89 (2024): 397-409.

[138] J. Li, X. Wu, C. Jian, et al., “GO-CoNiP New Composite Material Modified Separator for Long Cycle Lithium-Sulfur Batteries,” Small 20, no. 17 (2024): 2307912.

[139] Y. Li, J. Liu, X. Wang, et al., “CoFe₂O₄@ rGO as a Separator Coating for Advanced Lithium-Sulfur Batteries,” Small Science 3, no. 8 (2023): 2300045.

[140] Z. Li, F. Zhang, T. Cao, et al., “Highly Stable Lithium-Sulfur Batteries Achieved by a SnS/Porous Carbon Nanosheet Architecture Modified Celgard Separator,” Advanced Functional Materials 30, no. 48 (2020): 2006297.

[141] J. Feng, W. Liu, C. Shi, et al., “Enabling Fast Diffusion/Conversion Kinetics by Thiourea-Induced Wrinkled N, S Co-Doped Functional MXene for Lithium-Sulfur Battery,” Energy Storage Materials 67 (2024): 103328.

[142] P. Li, H. Lv, Z. Li, et al., “The Electrostatic Attraction and Catalytic Effect Enabled by Ionic-Covalent Organic Nanosheets on MXene for Separator Modification of Lithium-Sulfur Batteries,” Advanced Materials 33, no. 17 (2021): 2007803.

[143] W. Wang, K. Xi, B. Li, et al., “A Sustainable Multipurpose Separator Directed Against the Shuttle Effect of Polysulfides for High-Performance Lithium-Sulfur Batteries,” Advanced Energy Materials 12, no. 19 (2022): 2200160.

[144] D. K. Kim, J. B. Park, C. Choi, and D. W. Kim, “An Oxygen-Vacancy-Boosted Heterostructured Catalyst With Synergistically Integrated Dual Transition-Metal Oxides for High-Performance Lithium-Sulfur Batteries,” Chemical Engineering Journal 479 (2024): 147820.

[145] Z. Shen, W. Zhang, S. Mao, S. Li, X. Wang, and Y. Lu, “Tailored Electrolytes Enabling Practical Lithium-Sulfur Full Batteries via Interfacial Protection,” ACS Energy Letters 6, no. 8 (2021): 2673-2681.

[146] Y. Huang, L. Zhang, J. Ji, C. Cai, and Y. Fu, “Temperature-Dependent Viscoelastic Liquid MOFs Based Cellulose Gel Electrolyte for Advanced Lithium-Sulfur Batteries Over an Extensive Temperature Range,” Energy Storage Materials 64 (2024): 103065.

[147] T. Liu, Z. Shi, H. Li, et al., “Low-Density Fluorinated Silane Solvent Enhancing Deep Cycle Lithium-Sulfur Batteries' Lifetime,” Advanced Materials 33, no. 38 (2021): 2102034.

[148] Z. Li, Y. Li, C. X. Bi, et al., “Construction of Organic-Rich Solid Electrolyte Interphase for Long-Cycling Lithium-Sulfur Batteries,” Advanced Functional Materials 34, no. 5 (2024): 2304541.

[149] J. Feng, T. Liu, H. Li, Y. S. Hu, H. Mao, and L. Suo, “Ultralight Electrolyte With Protective Encapsulation Solvation Structure Enables Hybrid Sulfur-Based Primary Batteries Exceeding 660 Wh/kg,” Journal of the American Chemical Society 146 (2024): 3755-3763.

[150] L. P. Hou, Z. Li, N. Yao, et al., “Weakening the Solvating Power of Solvents to Encapsulate Lithium Polysulfides Enables Long-Cycling Lithium-Sulfur Batteries,” Advanced Materials 34, no. 45 (2022): 2205284.

[151] L. L. Su, N. Yao, Z. Li, et al., “Improving Rate Performance of Encapsulating Lithium-Polysulfide Electrolytes for Practical Lithium−Sulfur Batteries,” Angewandte Chemie 136, no. 10 (2024): e202318785.

[152] J.-W. Park, K. Ueno, N. Tachikawa, K. Dokko, and M. Watanabe, “Ionic Liquid Electrolytes for Lithium-Sulfur Batteries,” Journal of Physical Chemistry C 117, no. 40 (2013): 20531-20541.

[153] Y. W. Song, L. Shen, N. Yao, et al., “Anion-Involved Solvation Structure of Lithium Polysulfides in Lithium-Sulfur Batteries,” Angewandte Chemie International Edition 63, no. 19 (2024): e202400343.

[154] Z. Jiang, Z. Zeng, W. Hu, Z. Han, S. Cheng, and J. Xie, “Diluted High Concentration Electrolyte With Dual Effects for Practical Lithium-Sulfur Batteries,” Energy Storage Materials 36 (2021): 333-340.

[155] Y. Xiao, B. Han, Y. Zeng, et al., “New Lithium Salt Forms Interphases Suppressing Both Li Dendrite and Polysulfide Shuttling,” Advanced Energy Materials 10, no. 14 (2020): 1903937.

[156] X. Kong, Y. Kong, Y. Zheng, L. He, D. Wang, and Y. Zhao, “Hydrofluoroether Diluted Dual-Salts-Based Electrolytes for Lithium-Sulfur Batteries With Enhanced Lithium Anode Protection,” Small 18, no. 52 (2022): 2205017.

[157] J. Jung, H. Chu, I. Kim, et al., “Confronting Sulfur Electrode Passivation and Li Metal Electrode Degradation in Lithium-Sulfur Batteries Using Thiocyanate Anion,” Advanced Science 10, no. 15 (2023): 2301006.

[158] C. Chen, Q. Zhou, X. Li, B. Zhao, Y. Chen, and X. Xiong, “Organic Nitrate Additive for High-Rate and Large-Capacity Lithium Metal Anode in Carbonate Electrolyte,” Small Methods 8, no. 1 (2024): 2300839.

[159] H. Chu, J. Jung, H. Noh, et al., “Unraveling the Dual Functionality of High-Donor-Number Anion in Lean-Electrolyte Lithium-Sulfur Batteries,” Advanced Energy Materials 10, no. 21 (2020): 2000493.

[160] P. Jia, J. Wang, T. Zheng, et al., “Boosting Cathode Activity and Anode Stability of Lithium-Sulfur Batteries With Vigorous Iodic Species Triggered by Nitrate,” Angewandte Chemie International Edition 63 (2024): e202401055.

[161] C.-Z. Zhao, X. B. Cheng, R. Zhang, et al., “Li₂S₅-based Ternary-Salt Electrolyte for Robust Lithium Metal Anode,” Energy Storage Materials 3 (2016): 77-84.

[162] H. Wang, Y. Shao, H. Pan, et al., “A Lithium-Sulfur Battery With a Solution-Mediated Pathway Operating Under Lean Electrolyte Conditions,” Nano Energy 76 (2020): 105041.

[163] W. Guo, W. Zhang, Y. Si, D. Wang, Y. Fu, and A. Manthiram, “Artificial Dual Solid-Electrolyte Interfaces Based on In Situ Organothiol Transformation in Lithium Sulfur Battery,” Nature Communications 12, no. 1 (2021): 3031.

[164] J. Lian, W. Guo, and Y. Fu, “Isomeric Organodithiol Additives for Improving Interfacial Chemistry in Rechargeable Li-S Batteries,” Journal of the American Chemical Society 143, no. 29 (2021): 11063-11071.

[165] W. Zhang, F. Ma, Q. Wu, et al., “Dual-Functional Organotelluride Additive for Highly Efficient Sulfur Redox Kinetics and Lithium Regulation in Lithium-Sulfur Batteries,” Energy & Environmental Materials 6, no. 3 (2023): e12369.

[166] Z. Yu, X. Huang, M. Zheng, S. Q. Zhang, Y. Yang, and J. Lu, “Self-Assembled Macrocyclic Copper Complex Enables Homogeneous Catalysis for High-Loading Lithium-Sulfur Batteries,” Advanced Materials 35, no. 26 (2023): 2300861.

[167] J. Jung, H. Cho, I. Kim, S. Kim, W. Jo, and H. T. Kim, “Dual Functionalities of Rb Cation in Lean Electrolyte Lithium Sulfur Batteries,” Energy Storage Materials 63 (2023): 103040.

[168] Y. Ding, X. Li, Y. Chen, et al., “Hit Two Birds With One Stone: A Bi-Functional Selenium-Substituted Organosulfur Polymer Additive for High-Performance Lithium-Sulfur Batteries,” Chemical Engineering Journal 482 (2024): 148803.

[169] A. Fotouhi, D. Auger, L. O'Neill, T. Cleaver, and S. Walus, “Lithium-Sulfur Battery Technology Readiness and Applications—A Review,” Energies 10, no. 12 (2017): 1937.

[170] S. Dörfler, S. Walus, J. Locke, et al., “Recent Progress and Emerging Application Areas for Lithium-Sulfur Battery Technology,” Energy Technology 9, no. 1 (2021): 2000694.

[171] J. C. Chin, E. D. Aretskin-Hariton, D. J. Ingraham, et al., “Battery Evaluation Profiles for X-57 and Future Urban Electric Aircraft,” 2020 AIAA/IEEE Electric Aircraft Technologies Symposium (EATS) (IEEE, 2020).

[172] Z. P. Cano, D. Banham, S. Ye, et al., “Batteries and Fuel Cells for Emerging Electric Vehicle Markets,” Nature Energy 3, no. 4 (2018): 279-289.

[173] C. Wang, K. Xia, H. Wang, X. Liang, Z. Yin, and Y. Zhang, “Advanced Carbon for Flexible and Wearable Electronics,” Advanced Materials 31, no. 9 (2019): 1801072.

[174] J. He, A. Bhargav, and A. Manthiram, “In Situ Grown 1T′-MoTe₂ Nanosheets on Carbon Nanotubes as an Efficient Electrocatalyst and Lithium Regulator for Stable Lithium-Sulfur Full Cells,” Advanced Energy Materials 12, no. 1 (2022): 2103204.

[175] J. Chang, J. Shang, Y. Sun, et al., “Flexible and Stable High-Energy Lithium-Sulfur Full Batteries With Only 100% Oversized Lithium,” Nature Communications 9, no. 1 (2018): 4480.

[176] Y. Gao, Q. Guo, Q. Zhang, Y. Cui, and Z. Zheng, “Fibrous Materials for Flexible Li-S Battery,” Advanced Energy Materials 11, no. 15 (2021): 2002580.

[177] P. Gao, S. Xu, Z. Chen, et al., “Flexible and Hierarchically Structured Sulfur Composite Cathode Based on the Carbonized Textile for High-Performance Li-S Batteries,” ACS Applied Materials & Interfaces 10, no. 4 (2018): 3938-3947.

[178] F. A. D'Oliveira, F. C. L. Melo, and T. C. Devezas, “High-Altitude Platforms—Present Situation and Technology Trends,” Journal of Aerospace Technology and Management 8, no. 3 (2016): 249-262.

[179] B. A. Adu-Gyamfi and C. Good, “Electric Aviation: A Review of Concepts and Enabling Technologies,” Transportation Engineering 9 (2022): 100134.

[180] J. Balach, J. Linnemann, T. Jaumann, and L. Giebeler, “Metal-Based Nanostructured Materials for Advanced Lithium-Sulfur Batteries,” Journal of Materials Chemistry A 6, no. 46 (2018): 23127-23168.

[181] X.-G. Yang, T. Liu, S. Ge, E. Rountree, and C. Y. Wang, “Challenges and Key Requirements of Batteries for Electric Vertical Takeoff and Landing Aircraft,” Joule 5, no. 7 (2021): 1644-1659.

[182] A. Sahoo, S. K. Dwivedy, and P. S. Robi, “Advancements in the Field of Autonomous Underwater Vehicle,” Ocean Engineering 181 (2019): 145-160.

[183] D. Roper, M. Furlong, R. T. Kachoosangiy, et al., “Evaluating the Use of Lithium Sulphur Batteries for a Deep Ocean Pressure Balanced AUV Energy Source,” in 2016 IEEE/OES Autonomous Underwater Vehicles (AUV) (IEEE, 2016).

[184] W. L. Fredericks, S. Sripad, G. C. Bower, and V. Viswanathan, “Performance Metrics Required of Next-Generation Batteries to Electrify Vertical Takeoff and Landing (VTOL) Aircraft,” ACS Energy Letters 3, no. 12 (2018): 2989-2994.

[185] A. Brown and W. L. Harris, “Vehicle Design and Optimization Model for Urban Air Mobility,” Journal of Aircraft 57, no. 6 (2020): 1003-1013.

[186] M. D. Patterson, B. J. German, and M. D. Moore, “Performance Analysis and Design of On-Demand Electric Aircraft Concepts” (12th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference and 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 2012).

[187] M. J. Duffy, S. R. Wakayama, and R. Hupp, A Study in Reducing the Cost of Vertical Flight With Electric Propulsion” (17th AIAA Aviation Technology, Integration, and Operations Conference, 2017).

[188] V. Knap, L. K. Vestergaard, and D.-I. Stroe, “A Review of Battery Technology in CubeSats and Small Satellite Solutions,” Energies 13, no. 16 (2020): 4097.

[189] C. Chen, J. Zhang, B. Hu, Q. Liang, and X. Xiong, “Dynamic Gel as Artificial Interphase Layer for Ultrahigh-Rate and Large-Capacity Lithium Metal Anode,” Nature Communications 14, no. 1 (2023): 4018.

[190] A. Le Mong, J. C. Shin, M. Lee, et. al., “Accelerated Single Li-Ion Transport in Solid Electrolytes for Lithium-Sulfur Batteries: Poly(Arylene Ether Sulfone) Grafted With Pyrrolidinium-Terminated Poly(Ethylene Glycol),” Small 20, no. 23 (2023): 202309162.

[191] J. Lee, H. Kim, S. Jeong, et. al., “Enhanced Lithium-Ion Battery Separators via Facile Fabrication of Sulfonated Cellulose Nanofiber,” Cellulose 15 (2024): 1.

[192] R. Puttaswamy, H. A. Hoang, D. Kim, “Li-Ion Storage Performance of V₁₀O₂₄.nH₂O Micro Belt as Cathode Material for Lithium-Ion Battery,” Journal of Power Sources 597 (2024): 234157.

[193] C. Lee, Y. Seo, J. Han, et. al., “Perspectives on Critical Properties of Fullerene Derivatives for Rechargeable Battery Applications,” Carbon 210 (2023): 118041.

RIGHTS & PERMISSIONS

2025 The Author(s). Battery Energy published by Xijing University and John Wiley & Sons Australia, Ltd.