A CNN-LSTM Method Based on Voltage Deviation for Predicting the State of Health of Lithium-Ion Batteries

Abstract

Ensuring the accurate estimation of the state of health (SOH) of lithium-ion batteries (LIBs) is essential for the reliability and safe operation of battery management systems. The prediction of SOH has witnessed significant advancements recently, largely propelled by the powerful nonlinear modeling capabilities of deep learning. Despite these advancements, the intricate nature of the battery degradation process poses a challenge in accurately simulating it using measurement data. In this paper, we introduce a novel approach by focusing on the charging voltage deviation, which is defined as the discrepancy between the charging voltage and its average value over each charge/discharge cycle. This deviation is rooted in the electrochemical reactions that lead to capacity decay and voltage fluctuations. We propose a convolutional neural network-long short-term memory (CNN-LSTM) hybrid framework aimed at estimating the SOH of the battery. For each charge/discharge cycle, a conventional CNN is employed to extract key capacity features from sequential charging data, encompassing voltage deviation, current, and charging duration. Following this, an LSTM network is leveraged to build the long-term dependencies of battery capacities, facilitating the SOH prediction process. The experimental results indicate that our model not only simplifies the computational complexity but also significantly enhances the precision of SOH predictions. This innovative approach holds promise for the advancement of battery management systems, ensuring their continued reliability and safety.

Keywords

CNN-LSTM hybrid framework / LIBs / SOH / voltage

References

[1] R. Schmuch, R. Wagner, G. Hörpel, T. Placke, and M. Winter, “Performance and Cost of Materials for Lithium-Based Rechargeable Automotive Batteries,” Nature Energy 3, no. 4 (2018): 267-278.

[2] C. Xiao, X. Tang, J. Peng, and Y. Ding, “Graphene-Like BSI as a Promising Anode Material for Li-And Mg-Ion Batteries: A First Principle Study,” Applied Surface Science 563 (2021): 150278.

[3] H. Chen, W. Zhang, X.-Q. Tang, et al., “First Principles Study of P-Doped Borophene as Anode Materials for Lithium Ion Batteries,” Applied Surface Science 427 (2018): 198-205.

[4] Y. Liu, X. Ge, Z. Yang, et al., “An Automatic Descriptors Recognizer Customized for Materials Science Literature,” Journal of Power Sources 545 (2022): 231946.

[5] Y. Liu, L. Ding, Z. Yang, et al., “Domain Knowledge Discovery From Abstracts of Scientific Literature on Nickel-Based Single Crystal Superalloys,” Science China: Technological Sciences 66, no. 6 (2023): 1815-1830.

[6] X. Hu, D. Cao, and B. Egardt, “Condition Monitoring in Advanced Battery Management Systems: Moving Horizon Estimation Using a Reduced Electrochemical Model,” IEEE/ASME Transactions on Mechatronics 23, no. 1 (2018): 167-178.

[7] K. Khodadadi Sadabadi, X. Jin, and G. Rizzoni, “Prediction of Remaining Useful Life for a Composite Electrode Lithium Ion Battery Cell Using an Electrochemical Model to Estimate the State of Health,” Journal of Power Sources 481 (2021): 228861.

[8] H. Pang, L. Mou, L. Guo, and F. Zhang, “Parameter Identification and Systematic Validation of an Enhanced Single-Particle Model With Aging Degradation Physics for Li-Ion Batteries,” Electrochimica Acta 307 (2019): 474-487.

[9] C. Lyu, Y. Song, J. Zheng, et al., “In Situ Monitoring of Lithium-Ion Battery Degradation Using an Electrochemical Model,” Applied Energy 250 (2019): 685-696.

[10] A. Zilio and P. Mattavelli, “An Experimental Validation of the Adoption of DC-DC Converters for the Impedance Measurement in Li-Ion Batteries,” in Conference an Experimental Validation of the Adoption of DC-DC Converters for the Impedance Measurement in Li-Ion Batteries (Bari, Italy: IEEE, 2021), 1-6.

[11] W. Yan, B. Zhang, G. Zhao, S. Tang, G. Niu, and X. Wang, “A Battery Management System With a Lebesgue-Sampling-Based Extended Kalman Filter,” IEEE Transactions on Industrial Electronics 66, no. 4 (2019): 3227-3236.

[12] Q. Yu, L. Dai, R. Xiong, Z. Chen, X. Zhang, and W. Shen, “Current Sensor Fault Diagnosis Method Based on an Improved Equivalent Circuit Battery Model,” Applied Energy 310 (2022): 118588.

[13] R. Xiong, J. Huang, Y. Duan, and W. Shen, “Enhanced Lithium-Ion Battery Model Considering Critical Surface Charge Behavior,” Applied Energy 314 (2022): 118915.

[14] K. Liu, Y. Gao, C. Zhu, et al., “Electrochemical Modeling and Parameterization Towards Control-Oriented Management of Lithium-Ion Batteries,” Control Engineering Practice 124 (2022): 105176.

[15] Q. Zhao, L. Zhang, B. He, et al., “Identifying Descriptors for Li+ Conduction in Cubic Li-Argyrodites via Hierarchically Encoding Crystal Structure and Inferring Causality,” Energy Storage Materials 40 (2021): 386-393.

[16] Q. Zhao, M. Avdeev, L. Chen, and S. Shi, “Machine Learning Prediction of Activation Energy in Cubic Li-Argyrodites With Hierarchically Encoding Crystal Structure-Based (HECS) Descriptors,” Science Bulletin 66, no. 14 (2021): 1401-1408.

[17] M. Simic, A. K. Stavrakis, V. Jeoti, and G. M. Stojanovic, “A Randles Circuit Parameter Estimation of Li-Ion Batteries With Embedded Hardware,” IEEE Transactions on Instrumentation and Measurement 71 (2022): 1-12.

[18] A. Shah, K. Shah, C. Shah, and M. Shah, “State of Charge, Remaining Useful Life and Knee Point Estimation Based on Artificial Intelligence and Machine Learning in Lithium-Ion EV Batteries: A Comprehensive Review,” Renewable Energy Focus 42 (2022): 146-164.

[19] P. Pillai, J. Nguyen, and B. Balasingam, “Performance Analysis of Empirical Open-Circuit Voltage Modeling in Lithium-Ion Batteries, part-2: Data Collection Procedure,” IEEE Transactions on Transportation Electrification 1 (2024): 1.

[20] K. Khodadadi Sadabadi, P. Ramesh, P. Tulpule, Y. Guezennec, and G. Rizzoni, “Model-Based State of Health Estimation of a Lead-Acid Battery Using Step-Response and Emulated In-Situ Vehicle Data,” Journal of Energy Storage 36 (2021): 102353.

[21] G. Saldana, J. I. S. Martin Martín, I. Zamora, F. J. Asensio, O. Onederra, and M. Gonzalez, “Empirical Electrical and Degradation Model for Electric Vehicle Batteries,” IEEE Access 8 (2020): 155576-155589.

[22] Y. Wu, L. Xie, H. Ming, et al., “An Empirical Model for the Design of Batteries With High Energy Density,” ACS Energy Letters 5, no. 3 (2020): 807-816.

[23] Y. Liu, Z. Yang, X. Zou, et al., “Data Quantity Governance for Machine Learning in Materials Science,” National Science Review 10, no. 7 (2023): nwad125.

[24] N. Yang, Z. Song, H. Hofmann, and J. Sun, “Robust State of Health Estimation of Lithium-Ion Batteries Using Convolutional Neural Network and Random Forest,” Journal of Energy Storage 48 (2022): 103857.

[25] R. S. D. Teixeira, R. F. Calili, M. F. Almeida, and D. R. Louzada, “Recurrent Neural Networks for Estimating the State of Health of Lithium-Ion Batteries,” Batteries 10, no. 3 (2024): 111.

[26] Y. Wang, J. Zhu, L. Cao, B. Gopaluni, and Y. Cao, “Long Short-Term Memory Network With Transfer Learning for Lithium-Ion Battery Capacity Fade and Cycle Life Prediction,” Applied Energy 350 (2023): 121660.

[27] F. Wang, Z. Zhao, Z. Zhai, Z. Shang, R. Yan, and X. Chen, “Explainability-Driven Model Improvement for SOH Estimation of Lithium-Ion Battery,” Reliability Engineering & System Safety 232 (2023): 109046.

[28] P. Li, Z. Zhang, R. Grosu, et al., “An End-to-End Neural Network Framework for State-of-Health Estimation and Remaining Useful Life Prediction of Electric Vehicle Lithium Batteries,” Renewable and Sustainable Energy Reviews 156 (2022): 111843.

[29] B. Zraibi, C. Okar, H. Chaoui, and M. Mansouri, “Remaining Useful Life Assessment for Lithium-Ion Batteries Using CNN-LSTM-DNN Hybrid Method,” IEEE Transactions on Vehicular Technology 70, no. 5 (2021): 4252-4261.

[30] L. Ren, J. Dong, X. Wang, Z. Meng, L. Zhao, and M. J. Deen, “A Data-Driven Auto-CNN-LSTM Prediction Model for Lithium-Ion Battery Remaining Useful Life,” IEEE Transactions on Industrial Informatics 17, no. 5 (2021): 3478-3487.

[31] H. Xu, L. Wu, S. Xiong, W. Li, A. Garg, and L. Gao, “An Improved CNN-LSTM Model-Based State-of-Health Estimation Approach for Lithium-Ion Batteries,” Energy 276 (2023): 127585.

[32] D. Gao, X. Liu, Z. Zhu, and Q. Yang, “A Hybrid CNN-BILSTM Approach for Remaining Useful Life Prediction of EVS Lithium-Ion Battery,” Measurement and Control 56, no. 1-2 (2023): 371-383.

[33] M. Lin, J. Wu, J. Meng, W. Wang, and J. Wu, “State of Health Estimation With Attentional Long Short-Term Memory Network for Lithium-Ion Batteries,” Energy 268 (2023): 126706.

[34] Y. Liu, R. Li, B. Xiong, et al., “A Novel Vanadium Redox Flow Battery Modelling Method Using Honey Badger Optimization Assisted Cnn-Bilstm,” Journal of Power Sources 558 (2023): 232610.

[35] J. Mou, Q. Yang, Y. Tang, Y. Liu, J. Li, and C. Yu, “Prediction of the Remaining Useful Life of Lithium-Ion Batteries Based on the 1D CNN-BLSTM Neural Network,” Batteries 10, no. 5 (2024): 152.

[36] A. Tang, Y. Jiang, Q. Yu, and Z. Zhang, “A Hybrid Neural Network Model With Attention Mechanism for State of Health Estimation of Lithium-Ion Batteries,” Journal of Energy Storage 68 (2023): 107734.

[37] L. Zhang, T. Ji, S. Yu, and G. Liu, “Accurate Prediction Approach of SOH for Lithium-Ion Batteries Based on LSTM Method,” Batteries 9, no. 3 (2023): 177.

[38] Y. Liu, Z. Yang, Z. Yu, et al., “Generative Artificial Intelligence and Its Applications in Materials Science: Current Situation and Future Perspectives,” Journal of Materiomics 9, no. 4 (2023): 798-816.

[39] Y. Liu, X. Zou, S. Ma, M. Avdeev, and S. Shi, “Feature Selection Method Reducing Correlations Among Features by Embedding Domain Knowledge,” Acta Materialia 238 (2022): 118195.

[40] B. Jiang, H. Dai, and X. Wei, “Incremental Capacity Analysis Based Adaptive Capacity Estimation for Lithium-Ion Battery Considering Charging Condition,” Applied Energy 269 (2020): 115074.

[41] P. Liu, Y. Wu, C. She, Z. Wang, and Z. Zhang, “Comparative Study of Incremental Capacity Curve Determination Methods for Lithium-Ion Batteries Considering the Real-World Situation,” IEEE Transactions on Power Electronics 37, no. 10 (2022): 12563-12576.

[42] Z. Wang, C. Yuan, and X. Li, “Lithium Battery State-of-Health Estimation via Differential Thermal Voltammetry With Gaussian Process Regression,” IEEE Transactions on Transportation Electrification 7, no. 1 (2021): 16-25.

[43] X. Li, C. Yuan, Z. Wang, and J. Xie, “A Data-Fusion Framework for Lithium Battery Health Condition Estimation Based on Differential Thermal Voltammetry,” Energy 239 (2022): 122206.

[44] W. Pan, X. Luo, M. Zhu, J. Ye, L. Gong, and H. Qu, “A Health Indicator Extraction and Optimization for Capacity Estimation of Li-Ion Battery Using Incremental Capacity Curves,” Journal of Energy Storage 42 (2021): 103072.

[45] B. Ma, S. Yang, L. Zhang, et al., “Remaining Useful Life and State of Health Prediction for Lithium Batteries Based on Differential Thermal Voltammetry and a Deep-Learning Model,” Journal of Power Sources 548 (2022): 232030.

[46] K. A. Severson, P. M. Attia, N. Jin, et al., “Data-Driven Prediction of Battery Cycle Life Before Capacity Degradation,” Nature Energy 4, no. 5 (2019): 383-391.

[47] J. Zhu, Y. Wang, Y. Huang, et al., “Data-Driven Capacity Estimation of Commercial Lithium-Ion Batteries From Voltage Relaxation,” Nature Communications 13, no. 1 (2022): 2261.

[48] P. M. Attia, A. Grover, N. Jin, et al., “Closed-Loop Optimization of Fast-Charging Protocols for Batteries With Machine Learning,” Nature 578, no. 7795 (2020): 397-402.

[49] W. He, N. Williard, M. Osterman, and M. Pecht, “Prognostics of Lithium-Ion Batteries Based on Dempster-Shafer Theory and the Bayesian Monte Carlo Method,” Journal of Power Sources 196, no. 23 (2011): 10314-10321.

[50] Y. Xing, E. W. M. Ma, K.-L. Tsui, and M. Pecht, “An Ensemble Model for Predicting the Remaining Useful Performance of Lithium-Ion Batteries,” Microelectronics Reliability 53, no. 6 (2013): 811-820.

[51] G. Ma, S. Xu, B. Jiang, et al, “Real-Time Personalized Health Status Prediction of Lithium-Ion Batteries Using Deep Transfer Learning,” Energy & Environmental Science 15, no. 10 (2022): 4083-4094.

RIGHTS & PERMISSIONS

2024 The Author(s). Battery Energy published by Xijing University and John Wiley & Sons Australia, Ltd.