3D printing lunar regolith simulant with microbial-carbonated magnesium oxide

Hanlong Liu , Yang Xiao , Jinquan Shi , Baofeng Cao , Junbo Sun

Biogeotechnics ›› 2026, Vol. 4 ›› Issue (4) : 100197

PDF (10173KB)
Biogeotechnics ›› 2026, Vol. 4 ›› Issue (4) :100197 DOI: 10.1016/j.bgtech.2025.100197
research-article
3D printing lunar regolith simulant with microbial-carbonated magnesium oxide
Author information +
History +
PDF (10173KB)

Abstract

Lunar construction is important and a challenge for building space habitation. Several technology routines using in-situ lunar regolith as the base material for making lunar bricks have been proposed but they are still waiting in the list of verification. In this study, a new additive manufacturing method for making lunar regolith structures with biocarbonated magnesium oxide (MgO) was proposed. A lunar regolith simulant (LRS) was prepared. The effects of microbial-based prehydrolyzed urea solution, additives, and aggregates, on the properties of 3D printing mortars were investigated. The compressive strength and microscopic images of 3D printed specimens were analyzed. The test results showed that the microbial-based mortar has significantly different flowability and buildability compared with water-based mortar. The compressive strength of 3D printed specimens can be improved several times with the biocarbonated method. Microscopic images showed that the printed bio carbonated specimens show denser structure and more magnesium carbonate hydrate, causing the improvement of mechanical behavior. Complex LRS-based structures were printed with the biocarbonated magnesium oxide method, which can bear a certain of loads.

Keywords

Lunar regolith simulant / 3D printing / Biocarbonation / Magnesium oxide

Cite this article

Download citation ▾
Hanlong Liu, Yang Xiao, Jinquan Shi, Baofeng Cao, Junbo Sun. 3D printing lunar regolith simulant with microbial-carbonated magnesium oxide. Biogeotechnics, 2026, 4 (4) : 100197 DOI:10.1016/j.bgtech.2025.100197

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Aminpour, N., Memari, A. (2025). Analysis of anisotropic behavior in 3d concrete printing for mechanical property evaluation. Journal of Building Engineering, 99, Article 111652. https://doi.org/10.1016/j.jobe.2024.111652

[2]

Bai, G., Wang, L., Ma, G., Sanjayan, J., Bai, M. (2021). 3D printing eco-friendly concrete containing under-utilised and waste solids as aggregates. Cement and Concrete Composites, 120, Article 104037. https://doi.org/10.1016/j.cemconcomp.2021.104037

[3]

Bao, C., Zhang, D., Wang, Q., Cui, Y., Feng, P. (2024). Lunar in situ large-scale construction: Quantitative evaluation of regolith solidification techniques. Engineering, 39, 204-221. https://doi.org/10.1016/j.eng.2024.03.004

[4]

Bao, C., Wang, Y., Pearce, G., Zhao, P., Liu, M., Mushtaq, R. T. (2025). 3D printing of regolith-based epoxy composites with excellent temperature resistance and mechanical strength. Acta Astronautica, 229, 787-803. https://doi.org/10.1016/j.actaastro.2025.02.001

[5]

Benaroya, H., Bernold, L., Chua Koon, M. (2002). Engineering, design and construction of lunar bases. Journal of Aerospace Engineering, 15(2), 33-45. https://doi.org/10.1061/(ASCE)0893-1321(2002)15:2(33)

[6]

Buj, I., Torras, J., Casellas, D., Rovira, M., Pablo, J. De (2009). Effect of heavy metals and water content on the strength of magnesium phosphate cements. Journal of Hazardous Materials, 170(1), 345-350. https://doi.org/10.1016/j.jhazmat.2009.04.091

[7]

Chen, M., Li, L., Wang, J., Huang, Y., Wang, S., Zhao, P., Lu, L., Cheng, X. (2020a). " Rheological parameters and building time of 3d printing sulphoaluminate cement paste modified by retarder and diatomite. Construction and Building Materials, 234, Article 117391. https://doi.org/10.1016/j.conbuildmat.2019.117391

[8]

Chen, Y., Chaves Figueiredo, S., Li, Z., Chang, Z., Jansen, K., Çopuroğlu, O., Schlangen, E. (2020b). " Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture.". Cement and Concrete Research, 132, Article 106040. https://doi.org/10.1016/j.cemconres.2020.106040

[9]

Cocks, F. H., Klenk, P. A., Watkins, S. A., Simmons, W. N., Cocks, J. C., Cocks, E. E., Sussingham, J. C. (2002). Lunar ice: adsorbed water on subsurface polar dust. Icarus, 160(2), 386-397. https://doi.org/10.1006/icar.2002.6972

[10]

Crawford, I. A., Anand, M., Cockell, C. S., Falcke, H., Green, D. A., Jaumann, R., Wieczorek, M. A. (2012). Back to the moon: the scientific rationale for resuming lunar surface exploration. Planetary and Space Science, 74(1), 3-14. https://doi.org/10.1016/j.pss.2012.06.002

[11]

Dikshit, R., Dey, A., Gupta, N., Varma, S. C., Venugopal, I., Viswanathan, K., Kumar, A. (2021). Space bricks: from lss to machinable structures via micp. Ceramics International, 47(10, Part B), 14892-14898. https://doi.org/10.1016/j.ceramint.2020.07.309

[12]

Ding, C., Li, Q., Xu, J., Lei, Z., Li, J., Su, Y., Huang, S. (2023). Moon-based ground penetrating radar derivation of the helium-3 reservoir in the regolith at the Chang’e-3 landing site. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 16, 2764-2776. https://doi.org/10.1109/JSTARS.2023.3253499

[13]

Ellery, A. (2021). Leveraging in situ resources for lunar base construction. Canadian Journal of Civil Engineering, 49(5), 657-674. https://doi.org/10.1139/cjce-2021-0098

[14]

Ge, C., Feng, X., Xu, D., Liu, K., An, A. K., Fang, J. (2025). Exploring solar-powered water treatment in outer space: technologies, challenges, and opportunities for sustainable space habitats. Space Habitation, 1(1), Article 100006. https://doi.org/10.1016/j.spaceh.2025.100006

[15]

Han, W., Ding, L., Cai, L., Zhu, J., Luo, H., Tang, T. (2022). Sintering of hust-1 lunar regolith simulant. Construction and Building Materials, 324, Article 126655. https://doi.org/10.1016/j.conbuildmat.2022.126655

[16]

Indyk, S. J., Benaroya, H. (2017). A structural assessment of unrefined sintered lunar regolith simulant. Acta Astronautica, 140, 517-536. https://doi.org/10.1016/j.actaastro.2017.09.018

[17]

Li, C., Hu, H., Yang, M. F., Pei, Z. Y., Zhou, Q., Ren, X., ... Ouyang, Z. (2022). Characteristics of the lunar samples returned by the chang’e-5 mission. National Science Review, 9(2), https://doi.org/10.1093/nsr/nwab188

[18]

Li, L., Yu, H., Dong, J., Ma, H., Yu, W., Fang, K., ... Li, W. (2025). Optimal selection of magnesium phosphate cement systems for lunar soil concrete: potassium, ammonium, calcium, and sodium magnesium phosphate cements. Advances in Space Research, 75(6), 5205-5226. https://doi.org/10.1016/j.asr.2024.12.059

[19]

Li, Z., Wang, L., Ma, G. (2018). Method for the enhancement of buildability and bending resistance of 3d printable tailing mortar. International Journal of Concrete Structures and Materials, 12(1), 37. https://doi.org/10.1186/s40069-018-0269-0

[20]

Liu, X., Xiao, J., Cai, D., Su, Q., Yang, G., Yuan, S., Jiang, G. (2023a). " Recent advances in subgrade engineering for high-speed railway. Intelligent Transportation Infrastructure, 2 . https://doi.org/10.1093/iti/liad001

[21]

Liu, Y., Wang, L., Yuan, Q., Peng, J. (2023b). " Effect of coarse aggregate on printability and mechanical properties of 3d printed concrete. Construction and Building Materials, 405, Article 133338. https://doi.org/10.1016/j.conbuildmat.2023.133338

[22]

Liu, Z., Qin, Y., Hu, C., Wang, F. (2024). Boosting mgo hydration through sodium bicarbonate: enhancing the strength of mgo-calcined clay cementitious materials. Journal of Building Engineering, 98, Article 111279. https://doi.org/10.1016/j.jobe.2024.111279

[23]

Ma, S., Akca, A. H., Esposito, D., Kawashima, S. (2020). Influence of aqueous carbonate species on hydration and carbonation of reactive mgo cement. Journal of CO2 Utilization, 41, Article 101260. https://doi.org/10.1016/j.jcou.2020.101260

[24]

Ma, S., Jiang, Y., Fu, S., He, P., Sun, C., Duan, X., ... Zhou, Y. (2023). 3D-printed lunar regolith simulant-based geopolymer composites with bio-inspired sandwich architectures. Journal of Advanced Ceramics, 12(3), 510-525. https://doi.org/10.26599/JAC.2023.9220700

[25]

Meurisse, A., Makaya, A., Willsch, C., Sperl, M. (2018). Solar 3D printing of lunar regolith. Acta Astronautica, 152, 800-810. https://doi.org/10.1016/j.actaastro.2018.06.063

[26]

Meurisse, A., Beltzung, J. C., Kolbe, M., Cowley, A., Sperl, M. (2017). Influence of mineral composition on sintering lunar regolith. Journal of Aerospace Engineering, 30(4), 04017014. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000721

[27]

Nakamura, T., Smith, B. Solar thermal system for lunar isru applications: Development and field operation at mauna kea, hi Proc., 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 433.

[28]

Neves, J. M., Ramanathan, S., Suraneni, P., Grugel, R., Radlińska, A. (2020). Characterization, mechanical properties, and microstructural development of lunar regolith simulant-portland cement blended mixtures. Construction and Building Materials, 258, Article 120315. https://doi.org/10.1016/j.conbuildmat.2020.120315

[29]

Nie, J., Cui, Y., Senetakis, K., Guo, D., Wang, Y., Wang, G., ... Li, A. (2023). Predicting residual friction angle of lunar regolith based on Chang’e-5 lunar samples. Science Bulletin, 68(7), 730-739. https://doi.org/10.1016/j.scib.2023.03.019

[30]

Nie, J., Wang, S., Cui, Y., Wu, Z., He, J., Wang, G., Zeng, X. (2025). Analyzing the mechanical heterogeneity of the Chang’e-5 lunar breccia clast: implications for the elastic modulus of lunar rock. Journal of Geophysical Research: Planets, 130(6), https://doi.org/10.1029/2024JE008849

[31]

Osio-Norgaard, J., Hayes, A. C., Whiting, G. L. (2021). Sintering of 3D printable simulated lunar regolith magnesium oxychloride cements.”. Acta Astronautica, 183, 227-232. https://doi.org/10.1016/j.actaastro.2021.03.016

[32]

Papike, J. J., Simon, S. B., Laul, J. C. (1982). The lunar regolith: chemistry, mineralogy, and petrology. Reviews of Geophysics, 20(4), 761-826. https://doi.org/10.1029/RG020i004p00761

[33]

Pederson, F., Ellersick, L., Kim, H. J. (2025). A review of lunar regolith based alkali activated materials and sintered regolith for use as a construction material. Acta Astronautica, 232, 502-515. https://doi.org/10.1016/j.actaastro.2025.03.032

[34]

Reiter, L., Wangler, T., Roussel, N., Flatt, R. J. (2018). The role of early age structural build-up in digital fabrication with concrete. Cement and Concrete Research, 112, 86-95. https://doi.org/10.1016/j.cemconres.2018.05.011

[35]

Scott, A., Oze, C., Shah, V., Yang, N., Shanks, B., Cheeseman, C., ... Watson, M. (2021). Transformation of abundant magnesium silicate minerals for enhanced CO2 sequestration . Communications Earth Environment, 2(1), 25. https://doi.org/10.1038/s43247-021-00099-6

[36]

Shahsavari, M. H., Karbala, M. M., Iranfar, S., Vandeginste, V. (2022). Martian and lunar sulfur concrete mechanical and chemical properties considering regolith ingredients and sublimation. Construction and Building Materials, 350, Article 128914. https://doi.org/10.1016/j.conbuildmat.2022.128914

[37]

She, X., Wang, J., Xu, W., Xiao, L. (2025). Research on the impact of extraterrestrial lava tube environments on human survival and countermeasures. Space Habitation, 1(1), Article 100002. https://doi.org/10.1016/j.spaceh.2024.100002

[38]

Shi, J., Xiao, Z., Xiao, Y., Liu, H. (2024). Bio-molding of lunar regolith with bio-carbonized magnesium oxide. BiogeotechnicsArticle 100159. https://doi.org/10.1016/j.bgtech.2024.100159

[39]

Shoaei, P., Gallantree-Smith, H., Martínez Pacheco, V., Pamies, R., Kjøniksen, A. L., Pilehvar, S. (2024). Comparative analysis of 3D printing of portland cement mortars with hydroxypropyl methylcellulose and microfibrillated cellulose as viscosity modifying agents. Materials Design, 244, Article 113124. https://doi.org/10.1016/j.matdes.2024.113124

[40]

Song, L., Xu, J., Tang, H., Liu, J., Liu, J., Li, X., Fan, S. (2020). Vacuum sintering behavior and magnetic transformation for high-Ti type basalt simulated lunar regolith. Icarus, 347, Article 113810. https://doi.org/10.1016/j.icarus.2020.113810

[41]

Su, Y., Feng, J., Jin, P., Qian, C. (2019). Influence of bacterial self-healing agent on early age performance of cement-based materials. Construction and Building Materials, 218, 224-234. https://doi.org/10.1016/j.conbuildmat.2019.05.077

[42]

Taylor, L. A., Pieters, C. M., Britt, D. (2016). Evaluations of lunar regolith simulants. Planetary and Space Science, 126, 1-7. https://doi.org/10.1016/j.pss.2016.04.005

[43]

Ting, G. H. A., Tay, Y. W. D., Tan, M. J. (2021). Experimental measurement on the effects of recycled glass cullets as aggregates for construction 3D printing. Journal of Cleaner Production, 300, Article 126919. https://doi.org/10.1016/j.jclepro.2021.126919

[44]

Tramontin Souza, M., Maia Ferreira, I., Guzi De Moraes, E., Senff, L., Arcaro, S., Castro Pessôa, J. R., ... Novaes De Oliveira, A. P. (2022). Role of chemical admixtures on 3d printed portland cement: Assessing rheology and buildability. Construction and Building Materials, 314, Article 125666. https://doi.org/10.1016/j.conbuildmat.2021.125666

[45]

Ulubeyli, S. (2022). Lunar shelter construction issues: the state-of-the-art towards 3D printing technologies. Acta Astronautica, 195, 318-343. https://doi.org/10.1016/j.actaastro.2022.03.033

[46]

Wang, D. L., Tang, C. S., Pan, X. H., Dong, Z. H., Wang, R., Zhang, J. Z., ... Shi, B. (2025). Construction and demolition waste stabilization through biocarbonation of reactive magnesia cement: Effect of urea concentration. Journal of Materials in Civil Engineering, 37(1), 04024450. https://doi.org/10.1061/JMCEE7.MTENG-17257

[47]

Warren, P., Raju, N., Ebrahimi, H., Krsmanovic, M., Raghavan, S., Kapat, J., Ghosh, R. (2022). Effect of sintering temperature on microstructure and mechanical properties of molded martian and lunar regolith. Ceramics International, 48(23, Part B), 35825-35833. https://doi.org/10.1016/j.ceramint.2022.07.329

[48]

Xiao, J., Liu, H., Ding, T. (2021). Finite element analysis on the anisotropic behavior of 3D printed concrete under compression and flexure. Additive Manufacturing, 39, Article 101712. https://doi.org/10.1016/j.addma.2020.101712

[49]

Xiao, Y., Stuedlein Armin, W., Ran, J., Evans, T. M., Cheng, L., Liu, H., ... Chu, J. (2019). Effect of particle shape on strength and stiffness of biocemented glass beads. Journal of Geotechnical and Geoenvironmental Engineering, 145(11), 06019016. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002165

[50]

Zhang, H., Zhang, X., Zhang, G., Dong, K., Deng, X., Gao, X., Yang, Y., Xiao, Y., Bai, X., Liang, K., Liu, Y., Ma, W., Zhao, S., Zhang, C., Zhang, X., Song, J., Yao, W., Chen, H., Wang, W., Zou, Z., Yang, M. (2021a). " Size, morphology, and composition of lunar samples returned by chang’e-5 mission. Science China Physics, Mechanics Astronomy, 65(2), Article 229511. https://doi.org/10.1007/s11433-021-1818-1

[51]

Zhang, X., Gholami, S., Khedmati, M., Cui, B., Kim, Y.-R., Kim, Y.-J., Shin, H.-S., Lee, J. (2021b). " Spark plasma sintering of a lunar regolith simulant: effects of parameters on microstructure evolution, phase transformation, and mechanical properties. Ceramics International, 47 (4), 5209-5220. https://doi.org/10.1016/j.ceramint.2020.10.100

[52]

Zheng, Y., Ouyang, Z., Li, C., Liu, J., Zou, Y. (2008). China’s lunar exploration program: present and future. Planetary and Space Science, 56(7), 881-886. https://doi.org/10.1016/j.pss.2008.01.002

[53]

Zhou, C., Li, X., Gao, Y., Chen, R. (2025). Parametric design and optimization for lava tubes-like lunar arch habitation with large span. Space Habitation, 1(1), Article 100001. https://doi.org/10.1016/j.spaceh.2024.100001

[54]

Zhou, C., Chen, R., Xu, J., Ding, L., Luo, H., Fan, J., ... Tang, B. (2019). In-situ construction method for lunar habitation: Chinese super mason. Automation in Construction, 104, 66-79. https://doi.org/10.1016/j.autcon.2019.03.024

[55]

China National Standards GB/T 2419-2005, Test method for fluidity of cement mortar, Beijing, China (in Chinese).

PDF (10173KB)

0

Accesses

0

Citation

Detail

Sections
Recommended

/

〈 〉