3D printing and lab-scale testing of bio-inspired geogrids for road rutting reduction

Jiaojun Liu , Nimisha Roy , J. David Frost

Biogeotechnics ›› 2026, Vol. 4 ›› Issue (4) : 100188

PDF (5066KB)
Biogeotechnics ›› 2026, Vol. 4 ›› Issue (4) :100188 DOI: 10.1016/j.bgtech.2025.100188
research-article
3D printing and lab-scale testing of bio-inspired geogrids for road rutting reduction
Author information +
History +
PDF (5066KB)

Abstract

The utilization of geogrids to mitigate road rutting, or permanent deformation, has significantly increased over the last decade. However, faced with ever-increasing traffic loads, commonly used commercially available biaxial and triaxial geogrids cannot always provide an optimal solution. There is an urgent need for developing the next generation of geogrids that will be more cost-effective and outperform current options. This paper utilizes 3D printing technology to fabricate geogrids inspired by spider webs, and evaluates their relative performance using a lab-scale testing system. The testing apparatus comprises a miniature road structure with two layers: a top base course layer made of aggregates and a bottom subgrade layer made of locally sourced soil. A wheel moves cyclically to simulate traffic loads. Additionally, the testing program incorporates 3D scanning at various stages using a handheld scanner to digitize changes to critical surfaces, such as the top of the road and the interface between the base course and the subgrade. These digitized data are used to compare the relative performance of different geogrids. The lab-scale testing results reveal that, although the new bio-inspired geogrid did not show significant additional improvement in reducing surface rutting for the lab-scale road, the bio-inspired geogrid helped distribute traffic load to a larger area of the subgrade than some existing commercial products.

Keywords

Geogrids / Spider webs / Bio-inspired design / Rutting

Cite this article

Download citation ▾
Jiaojun Liu, Nimisha Roy, J. David Frost. 3D printing and lab-scale testing of bio-inspired geogrids for road rutting reduction. Biogeotechnics, 2026, 4 (4) : 100188 DOI:10.1016/j.bgtech.2025.100188

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Abu-Farsakh, M. Y., & Chen, Q. (2011). Evaluation of geogrid base reinforcement in flexible pavement using cyclic plate load testing. International Journal of Pavement Engineering, 12(3), 275-288. https://doi.org/10.1080/10298436.2010.549565

[2]

Abu-Farsakh, M. Y., Souci, G., Voyiadjis, G. Z., & Chen, Q. (2012). Evaluation of factors affecting the performance of geogrid-reinforced granular base material using repeated load triaxial tests. Journal of Materials in Civil Engineering, 24(1), 72-83. https://doi.org/10.1061/(asce)mt.1943-5533.0000349

[3]

Benyus, J. M. (2009). Biomimicry: Innovation inspired by nature. New York, NY: Harper Collins.

[4]

Borela, R., Frost, J. D., Viggiani, G., & Anselmucci, F. (2021). Earthworm-inspired robotic locomotion in sand: An experimental study with X-ray tomography. Géotechnique Letters, 11(1), 66-73. https://doi.org/10.1680/jgele.20.00085

[5]

Craig, C. L. (1987a). The significance of spider size to the diversification of spider-web architectures and spider reproductive modes. The American Naturalist. https://doi.org/10.1086/284622

[6]

Craig, C. L. (1987b). The ecological and evolutionary interdependence between web architecture and web silk spun by orb web weaving spiders. Biological Journal of the Linnean Society, 30(2), 135-162. https://doi.org/10.1111/j.1095-8312.1987.tb00294.x

[7]

Douglas, R. A. (1997). Repeated-load behaviour of geosynthetic-built unbound roads. Canadian Geotechnical Journal, 34(2), 197-203. https://doi.org/10.1139/cgj-34-2-197

[8]

Haas, R., Walls, J., & Carroll, R. G. (1988). Geogrid reinforcement of granular bases in flexible pavements. Transportation Research Record, 1188(1), 19-27.

[9]

Halliday, A.R., & Potter, J.F. (1984). The performance of a flexible pavement constructed on a strong fabric, TRRL Laboratory Report, 1123.

[10]

Hanumasagar, S. S. (2019). Experimental and computational evaluation of geomaterial interactions in flexible pavementsDoctoral dissertation Georgia Institute of Technology.

[11]

Mallett, S. D., Frost, J. D., & Huntoon, J. A. (2021). Root-inspired anchorage systems for uplift and lateral force resistance. IFCEE, 2021, 299-307. https://doi.org/10.1061/9780784483411.029

[12]

Martinez, A., Dejong, J., Akin, I., Aleali, A., Arson, C., Atkinson, J., et al. (2022). Bio-inspired geotechnical engineering: Principles, current work, opportunities and challenges. Géotechnique, 72(8), 687-705. https://doi.org/10.1680/jgeot.20.P.170

[13]

McKeag, T. (2014). Little things multiply up: Hierarchical structures. Zygote Quarterly, 9, 10-27.

[14]

O’Hara, K. B., & Martinez, A. (2022). Load transfer directionality of snakeskin-inspired piles during installation and pullout in sands. Journal of Geotechnical and Geoenvironmental Engineering, 148(12), 04022110. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002929

[15]

Shaheen, M., Al-Mayah, A., & Tighe, S. (2017). Effects of high friction aggregate and PG Plus binder on rutting resistance of hot mix asphalt mixtures. International Journal of Pavement Engineering, 18(4), 292-302. https://doi.org/10.1080/10298436.2015.1065996

[16]

Sharbaf, M., & Ghafoori, N. (2021). Laboratory evaluation of geogrid-reinforced flexible pavements. Transportation Engineering, 4, Article 100070. https://doi.org/10.1016/j.treng.2021.100070

[17]

Soler, A., & Zaera, R. (2016). The secondary frame in spider orb webs: The detail that makes the difference. Scientific Reports, 6(1), https://doi.org/10.1038/srep31265

[18]

Zhang, W., Huang, R., Xiang, J., & Zhang, N. (2024). Recent advances in bio-inspired geotechnics: From burrowing strategy to underground structures. Gondwana Research, 130, 1-17. https://doi.org/10.1016/j.gr.2023.12.018

[19]

Zhao, Y., & Dai, S. (2023). Challenges of rock drilling and opportunities from bio-boring. Biogeotechnics, 1(1), Article 100009. https://doi.org/10.1016/j.bgtech.2023.100009

PDF (5066KB)

0

Accesses

0

Citation

Detail

Sections
Recommended

/

〈 〉