Pressures exerted on the soil ecosystem due to its exposure to lead have a significant and aggravating effect on the quality of life. This study was conducted to investigate the aided phytostabilization of Pb-contaminated soils by novel combined amendments. The pot experiment was run under greenhouse conditions, using the following mixtures of immobilizing amendments: halloysite and limestone as well as halloysite and compost. The Pb contents in plants, both total and CaCl2-extractable Pb concentration in soil, were determined using the spectrophotometric method. The use of halloysite and compost was shown to be the most effective and decreased the average Pb content in the above-ground parts of F. rubra and in the soil and was found to significantly increase soil pH and Pb content in roots of the test plant. New methods should be developed to minimize the environmental risk posed by the presence of heavy metal pollutants. The results show significant effects of immobilizing amendments on the chemical characteristics of soil contaminated with Pb and the uptake of Pb by plants.
Concrete has been one of the most common building materials used in construction in the world for many centuries. The manufacturing of concrete plays an important role in the generation of global warming emissions and waste and causes non-renewable resource depletion. This research assesses the environmental impacts of the use of supplementary cementitious materials (SCMs) and engineered nanomaterials (ENMs) (i.e., by-products) as partial replacement of ordinary Portland cement in concrete. It also evaluates the structural performance of the use of construction and demolition waste as partial replacement of natural aggregate in concrete in terms of compressive strength and durability. Results show that the use of SCMs and ENMs reduces the global warming impact (GWI) and the cumulative energy demand (CED) of concrete production without reducing strength and durability. In some cases, it enhances durability and strength. However, there is a trade-off between durability and strength improvement with the use of reengineered by-products resulting in increased GWI and CED. Although they produce almost the same GWI and CED as those of OPC concrete, improving the use of recycled aggregates as a partial natural aggregate replacement can reduce the use of virgin materials.
Culverts are often required under earth embankment to allow for the crossing of a watercourse, like streams, to prevent the road embankment from obstructing the natural waterway. The opening of the culvert is determined based on the waterway required to accommodate the design flood, whereas the thickness of the culvert section is designed based on the loads applied to the culvert. From the previous literature review, it is noted that the effect of haunch on the stresses of the culvert was not studied. Therefore, this research focuses on the impact of using haunches on the economy of the culvert design. This paper studies some design parameters of box culverts, such as the thickness of the haunch, the coefficient of earth pressure, the thickness of box culvert, and depth of fill on the top slab. The objectives show the effect of haunch on the stresses of the box culvert. The study investigated the variation in stresses and the cost comparison made for different width of the box culvert. The percentage reduction in the cost of culvert based on the presence of haunch is presented. At last, several significant conclusions are given based on numerical results as the presence of haunch is the best solution for decreasing the values of stresses from the economic point of view.
Drought is predicted to become more severe and frequent in the future due to anthropogenic activities. As a method to prepare for the unexpected consequences of drought, potassium (K) nutrition has been proposed to mitigate water deficit in plants. However, field-scale studies involving oil palm seedlings are scarce. The study was conducted to determine the effects of different water stress regimes on the physiology of oil palm seedlings, to identify the best rate of potassium fertiliser under water stress application, and to understand the interaction between drought impacts and potassium application on oil palm seedlings. Three levels of potassium rates (K1, K2, and K3) with five times applications (170, 340, and 510 kg KCL ha−1), (480, 960, and 1440 kg KCL ha−1), (170, 340, and 510 kg KCL ha−1), (960, 1920, and 2880 KCL kg ha−1), and (960, 1920, and 2880 kg KCL ha−1) under three different levels of water stress (100% ER [Evapotranspiration replacement; well-watered], 75% ER [moderate water stress], and 25% ER [severe water stress]) were exposed on oil palm seedlings in Randomized Completely Block Design (RCBD). Growth, carbon assimilation, and biochemical parameters were analysed during the experiment. It was found that water stress deteriorated the growth of oil palm seedlings. As potassium fertiliser rates increased, no significant differences in the physiology of the seedlings were observed except for height, net photosynthesis, and intercellular CO2. However, the biochemical properties (proline, soluble sugars, phenolics and flavonoids) of oil palm seedling increased while MDA decreased when the application of K was increased. Thus, to optimise the water and fertiliser utilisation under water scarcity, it is suggested to use a double rate of K fertiliser with 75% ER. The study proposed that K nutrient management strategy has the potential to minimise the impacts of drought stress in oil palm seedlings.
The ubiquitous presence of pharmaceuticals in the aquatic environment is a worldwide problem of today. Current analytical methods reveal ever more pharmaceuticals in different water bodies. The concentrations in waters that are detectable reach nano-and picogram ranges, i.e., ppb and ppt levels. Observed concentrations amount to as high as few micrograms. Among the major entry paths are wastewater treatment plants, which are often unable to eliminate the pharmaceuticals sufficiently relying on their three conventional purification stages. Hence, pharmaceuticals enter the aquatic environment without desirable deconstruction. Thus, advanced wastewater treatment processes are under development to retain or eliminate these trace contaminants. According to Decision 2018/840, a watchlist of 15 contaminants of significant interest has been established for the monitoring of surface waters in the European Union. The contaminants include biocides and pharmaceuticals, among them three estrogens, estrone (E1), 17-β-estradiol (E2) and 17-α-ethinylestradiol, (EE2), the antibiotics azithromycin, clarithromycin and erythromycin of macrolide type, ciprofloxacin and amoxicillin of fluoroquinolone and betalactame type. This review will provide an overview of the currently explored and researched methods for the realization of a fourth purification stage in wastewater treatment plants. To this purpose, biological, chemical and physical purification processes are reviewed and their characteristics and potential discussed. The degradation efficacy of the pharmaceuticals on the EU-Watch list will be compared and evaluated with respect to the most promising processes, which might be realized on large scale. Last but not least, recent and novel pilot plants will be presented and discussed.
Treated wastewater effluents are a source of emerging contaminants, including microplastics and pharmaceuticals, that impact rivers and streams. As microplastics are transported from wastewater treatment into the environment, pharmaceuticals can sorb to the surface and also be colonized by microorganisms. To investigate the microbial communities that are important in pharmaceutical transformation on microplastic surfaces, we used a culture-based approach with naproxen as the model pharmaceutical. Microplastic beads served as a solid substrate for delivering naproxen to anaerobic cultures inoculated with either anaerobic digester sludge or sediment from a wastewater-impacted river. After demonstrating naproxen transformation activity within the cultures, we separated the bulk liquid culture from the colonized microplastic beads and transferred them into separate bottles of sterile media amended with naproxen. Naproxen transformation occurred in cultures that contained microbially-colonized microplastics. Results from DNA analyses of the microbial community from each treatment demonstrated a different microbial community structure on the colonized plastic compared to that of the planktonic cells, thus illustrating a selection of the microbial community by the microplastics. These findings demonstrate that the microbial community attached to microplastic beads can continue pharmaceutical transformation activity when the microplastics are transferred to new media, thus serving as a model for the potential transport of pharmaceutical-transforming microbes from wastewater treatment to freshwater environments.