Structural design and simulation of PDMS/SiC functionally graded substrates for applications in flexible hybrid electronics

Abstract

Flexible hybrid electronics possess significant potential for applications in biomedical and wearable devices due to their advantageous properties of good ductility, low mass, and portability. However, they often exhibit a substantial disparity in elastic modulus between the flexible substrate and rigid components. This discrepancy can result in damage to the rigid components themselves and detachment from the substrate when subjected to tensile, bending, or other loads. Consequently, it diminishes the lifespan of flexible hybrid electronics and restricts their broader-scale application. Therefore, this paper proposes a polydimethylsiloxane (PDMS)/SiC functionally graded flexible substrate based on variable stiffness properties. Initially, ABAQUS simulation is employed to analyze how variations in stiffness impact the stress-strain behavior of PDMS/SiC functionally graded flexible substrates. Subsequently, we propose a multi-material 3D printing process for fabricating PDMS/SiC functionally graded flexible substrates and develop an advanced multi-material 3D printing equipment to facilitate this process. Tensile specimens with the functional gradient of PDMS/SiC are successfully fabricated and subjected to mechanical testing. The results from the tensile tests demonstrate a significant enhancement in the tensile rate (from 21.6% to 35%) when utilizing the PDMS/SiC functionally graded flexible substrate compared to those employing only PDMS substrate. Furthermore, the application of PDMS/SiC functional gradient flexible substrate exhibits remarkable bending and tensile properties in stretchable electronics and skin electronics domains. The integrated fabrication approach of the PDMS/SiC functionally graded flexible substrate structure presents a novel high-performance solution along with its corresponding 3D printing methodology for stretchable flexible electronics, skin electronics, and other related fields.

Keywords

Multi-material 3D printing / PDMS/SiC / Functionally graded flexible substrate / Structural design and simulation / Engineering / Materials Engineering

References

[1] RogersJA, ChenX, FengX. Flexible hybrid electronics. Adv Mater, 2020, 32151905590.

[2] HerbertR, KimJH, KimYS, et al. . Soft material-enabled, flexible hybrid electronics for medicine, healthcare, and human-machine interfaces. Materials, 2018, 112187.

[3] TaiLC, GaoW, ChaoM, et al. . Methylxanthine drug monitoring with wearable sweat sensors. Adv Mater, 2018, 30231707442.

[4] MaY, ZhangY, CaiS, et al. . Flexible hybrid electronics for digital healthcare. Adv Mater, 2020, 32151902062.

[5] KimJ, SeoJ, JungD, et al. . Active photonic wireless power transfer into live tissues. Proc Natl Acad Sci, 2020, 1172916856-16863.

[6] LimHR, KimHS, QaziR, et al. . Advanced soft materials, sensor integrations, and applications of wearable flexible hybrid electronics in healthcare, energy, and environment. Adv Mater, 2020, 32151901924.

[7] YuY, NassarJ, XuC, et al. . Biofuel-powered soft electronic skin with multiplexed and wireless sensing for human-machine interfaces. Sci Robot, 2020, 541e7946.

[8] WuY, XiaoD, LiuP, et al. . Nanostructured conductive polypyrrole for antibacterial components in flexible wearable devices. Research, 2023, 6: 0074.

[9] PuJ, MaK, LuoY, et al. . Textile electronics for wearable applications. Int J Extrem Manuf, 2023, 5. 042007

[10] GaoW, EmaminejadS, NyeinHYY, et al. . Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis. Nature, 2016, 5297587509-514.

[11] WallinTJ, PikulJ, ShepherdRF. 3D printing of soft robotic systems. Nat Rev Mater, 2018, 3684-100.

[12] LiZ, LiH, ZhuX, et al. . Directly printed embedded metal mesh for flexible transparent electrode via liquid substrate electric-field-driven jet. Adv Sci, 2022, 9142105331.

[13] ChoSY, HoDH, JoSB, et al. . Direct 4D printing of functionally graded hydrogel networks for biodegradable, untethered, and multimorphic soft robots. Int J Extrem Manuf, 2024, 62. 025002

[14] LeeC, KimM, KimYJ, et al. . Soft robot review. Int J Control Autom Syst, 2017, 15: 3-15.

[15] WehnerM, TrubyRL, FitzgeraldDJ, et al. . An integrated design and fabrication strategy for entirely soft, autonomous robots. Nature, 2016, 5367617451-455.

[16] XuZ, ChenY, XuQ. Spreadable magnetic soft robots with on-demand hardening. Research, 2023, 6: 0262.

[17] MartinezRV, GlavanAC, KeplingerC, et al. . Soft actuators and robots that are resistant to mechanical damage. Adv Funct Mater, 2014, 24203003-3010.

[18] MaM, GuoL, AndersonDG, et al. . Bio-inspired polymer composite actuator and generator driven by water gradients. Science, 2013, 3396116186-189.

[19] ShiX, ZuoY, ZhaiP, et al. . Large-area display textiles integrated with functional systems. Nature, 2021, 5917849240-245.

[20] MandaR, PagidiS, LimYJ, et al. . Self-supported liquid crystal film for flexible display and photonic applications. J Mol Liq, 2019, 291. 111314

[21] AreirM, XuY, HarrisonD, et al. . Development of 3D printing technology for the manufacture of flexible electric double-layer capacitors. Mater Manuf Process, 2018, 33: 905-911.

[22] LeeSM, KwonJH, KwonS, et al. . A review of flexible OLEDs toward highly durable unusual displays. IEEE Trans Electron Dev, 2017, 6451922-1931.

[23] KooJH, KimDC, ShimHJ, et al. . Flexible and stretchable smart display: materials, fabrication, device design, and system integration. Adv Funct Mater, 2018, 28: 1801834.

[24] YangL, HongX, LiJ, et al. . Rechargeable metasurfaces for dynamic color display based on a compositional and mechanical dual-altered mechanism. Research, 2022, 2022: 9828757.

[25] XueW, ZhangY, LiuF, et al. . Self-powered flexible multicolor electrochromic devices for information displays. Research, 2023, 6: 0227.

[26] ZhuX, LiuM, QiX, et al. . Templateless, plating-free fabrication of flexible transparent electrodes with embedded silver mesh by electric-field-driven microscale 3D printing and hybrid hot embossing. Adv Mater, 2021, 33212007772.

[27] ChaiW, LiL, ZhuW, et al. . Graded heterojunction improves wide-bandgap perovskite for highly Efficient 4-terminal perovskite/silicon tandem solar cells. Research, 2023, 6: 0196.

[28] LeeTD, EbongAU. A review of thin film solar cell technologies and challenges. Renew Sustain Energy Rev, 2017, 70: 1286-1297.

[29] HuS, HuanX, LiuY, et al. . Recent advances in meniscus-on-demand three-dimensional micro- and nano-printing for electronics and photonics. Int J Extrem Manuf, 2023, 53. 032009

[30] AliN, HussainA, AhmedR, et al. . Advances in nanostructured thin film materials for solar cell applications. Renew Sustain Energy Rev, 2016, 59: 726-737.

[31] ShangY, HaoS, YangC, ChenG. Enhancing solar cell efficiency using photon upconversion materials. Nanomaterials, 2015, 541782-1809.

[32] QiD, ZhangK, TianG, et al. . Stretchable electronics based on PDMS substrates. Adv Mater, 2021, 3362003155.

[33] ZhangH, ZhuX, TaiY, et al. . Recent advances in nanofiber-based flexible transparent electrodes. Int J Extrem Manuf, 2023, 5. 032005

[34] HuangZ, HaoY, LiY, et al. . Three-dimensional integrated stretchable electronics. Nat Electron, 2018, 18473-480.

[35] HeX, LinY, DingY, et al. . Reshapeable, rehealable and recyclable sensor fabricated by direct ink writing of conductive composites based on covalent adaptable network polymers. Int J Extrem Manuf, 2022, 4. 015301

[36] LiuH, LiM, LiuS, et al. . Spatially modulated stiffness on hydrogels for soft and stretchable integrated electronics. Mater Horiz, 2020, 71203-213.

[37] YangJC, MunJ, KwonSY, et al. . Electronic skin: recent progress and future prospects for skin-attachable devices for health monitoring, robotics, and prosthetics. Adv Mater, 2019, 31481904765.

[38] PeiskerH, MichelsJ, GorbSN. Evidence for a material gradient in the adhesive tarsal setae of the ladybird beetle Coccinella septempunctata. Nat Commun, 2013, 411661.

[39] PolitiY, PriewasserM, PippelE, et al. . A spider’s fang: how to design an injection needle using chitin-based composite material. Adv Funct Mater, 2012, 22122519-2528.

[40] NaserifarN, LeducPR, FedderGK. Material gradients in stretchable substrates toward integrated electronic functionality. Adv Mater, 2016, 28183584-3591.

[41] CaoQ, GaoY, PuJ, et al. . Gradient design of imprinted anode for stable Zn-ion batteries. Nat Commun, 2023, 141641.

[42] WuJ, JuZ, ZhangX, et al. . Gradient design for high-energy and high-power batteries. Adv Mater, 2022, 34292202780.

[43] MiaoL, GuoH, WanJ, et al. . Localized modulus-controlled PDMS substrate for 2D and 3D stretchable electronics. J Micromech Microeng, 2020, 304. 045001

[44] LibanoriR, ErbRM, ReiserA, et al. . Stretchable heterogeneous composites with extreme mechanical gradients. Nat Commun, 2012, 311265.

Funding

National Natural Science Foundation of China(52175331)

Natural Science Foundation of Shandong Province(ZR2021ME139)

RIGHTS & PERMISSIONS

Shanghai University and Periodicals Agency of Shanghai University and Springer-Verlag GmbH Germany, part of Springer Nature