A novel weld-pool-length monitoring method based on pixel analysis in plasma arc additive manufacturing

Abstract

The real-time monitoring of the weld pool during deposition is important for automatic control in plasma arc additive manufacturing. To obtain a high deposition accuracy, it is essential to maintain a stable weld pool size. In this study, a novel passive visual method is proposed to measure the weld pool length. Using the proposed method, the image quality was improved by designing a special visual system that employed an endoscope and a camera. It also includes pixel brightness-based and gradient-based algorithms that can adaptively detect feature points at the boundary when the weld pool geometry changes. This algorithm can also be applied to materials with different solidification characteristics. Calibration was performed to measure the real weld pool length in world coordinates, and outlier rejection was performed to increase the accuracy of the algorithm. Additionally, tests were carried out on the intersection component, and the results showed that the proposed method performed well in tracking the changing weld pool length and was applicable to the real-time monitoring of different types of materials.

Keywords

Plasma arc additive manufacturing (PAAM) / Weld pool geometry / Gradient analysis / Real-time detection

References

[1] Wang C, Suder W, Ding J, et al. Wire based plasma arc and laser hybrid additive manufacture of Ti-6Al-4V. J Mater Process Tech, 2021, 293: 117080.

[2] Artaza T, Alberdi A, Murua M, et al. Design and integration of WAAM technology and in situ monitoring system in a gantry machine. Procedia Manuf, 2017, 13: 778-785.

[3] Devesse W, Baere DD, Hinderdael M, et al. Hardware-in-the-loop control of additive manufacturing processes using temperature feedback. J Laser Appl, 2016, 28(2): 022302.

[4] Demir AG, Mazzoleni L, Caprio L, et al. Complementary use of pulsed and continuous wave emission modes to stabilize melt pool geometry in laser powder bed fusion. Opt Laser Technol, 2019, 113: 15-26.

[5] Hu D, Kovacevic R. Modelling and measuring the thermal behaviour of the molten pool in closed-loop controlled laser-based additive manufacturing. Proc Inst Mech Eng B-J Eng, 2003, 217(4): 441-452.

[6] Venturini G, Montevecchi F, Scippa A, et al. Optimization of waam deposition patterns for t-crossing features. Procedia Cirp, 2016, 55: 95-100.

[7] McAndrew AR, Rosales MA, Colegrove PA, et al. Interpass rolling of Ti-6Al-4V wire+arc additively manufactured features for microstructural refinement. Addit Manuf, 2018, 21: 340-349.

[8] Li R, Wang G, Ding Y, et al. Optimization of the geometry for the end lateral extension path strategy to fabricate intersections using laser and cold metal transfer hybrid additive manufacturing. Addit Manuf, 2020, 36: 101546.

[9] Davis T, Shin YC. Vision-based clad height measurement. Mach Vision Appl, 2010, 22(1): 129-136.

[10] Mazzoleni L, Caprio L, Pacher M, et al. External illumination strategies for melt pool geometry monitoring in SLM. JOM, 2019, 71: 928-937.

[11] Wang ZZ. Monitoring of GMAW weld pool from the reflected laser lines for real-time control. IEEE T Ind Inform, 2014, 10(4): 2073-2083.

[12] Xiong J, Shi M, Liu Y, et al. Virtual binocular vision sensing and control of weld pool width for gas metal arc additive manufactured thin-walled components. Addit Manuf, 2020, 33: 101121.

[13] Yang D, Wang G, Zhang G. Thermal analysis for single-pass multi-layer GMAW based additive manufacturing using infrared thermography. J Mater Process Tech, 2017, 244: 215-224.

[14] Chen ZQ, Gao XD. Detection of weld pool width using infrared imaging during high-power fiber laser welding of type 304 austenitic stainless steel. Int J Adv Manuf Tech, 2014, 74(9/12): 1247-1254.

[15] Yamane S, Godo T, Hosoya T, et al. Detecting and tracking of welding line in visual plasma robotic welding. Weld Int, 2015, 29(9): 661-667.

[16] Zhang GK, Wu CS, Liu X. Single vision system for simultaneous observation of keyhole and weld pool in plasma arc welding. J Mater Process Tech, 2020, 215: 71-78.

[17] Xiong J, Pi Y, Chen H. Deposition height detection and feature point extraction in robotic GTA- based additive manufacturing using passive vision sensing. Robot Com-Int Manuf, 2019, 59: 326-334.

[18] Reisgen U, Purrio M, Buchholz G, et al. Machine vision system for online weld pool observation of gas metal arc welding processes. Weld World, 2020, 58(5): 707-711.

[19] Akbari M, Saedodin S, Toghraie D, et al. Experimental and numerical investigation of temperature distribution and melt pool geometry during pulsed laser welding of Ti6Al4V alloy. Opt Laser Technol, 2014, 59: 52-59.

[20] Liu BQ, Fang G, Lei LP. An analytical model for rapid predicting molten pool geometry of selective laser melting (SLM) - ScienceDirect. Appl Math Model, 2021, 92: 505-524.

[21] Wang Q, Li JY, Gouge M, et al. Physics-Based Multivariable Modeling and Feedback Linearization Control of Melt-Pool Geometry and Temperature in Directed Energy Deposition. ASME J Manuf Sci Eng, 2016, 139(2): 021013.

[22] Weglowski Marek S. Investigation on the electric arc light emission in TIG welding. Int J Comput Mat Sci Surface Eng, 2007, 1(6): 734-749.

[23] Zhao CX, Richardson IM, Kenjeres S, et al. A stereo vision method for tracking particle flow on the weld pool surface. J Appl Phys, 2009, 105(12): 2570-3147.

[24] Zhang Z. A flexible new technique for camera calibration. IEEE T Pattern Anal, 2000, 22(11): 1330-1334.

[25] Bin Z, Sen C, Wang Ju, et al. Feature points extraction of laser vision weld seam based on genetic algorithm. Chin J Lasers, 2019, 46(1): 0102001.

Funding

China Scholarship Council

Basic and Applied Basic Research Foundation of Guangdong Province http://dx.doi.org/10.13039/501100021171(2022A1515110733)