Digital twin-based sustainable intelligent manufacturing: a review

Abstract

As the next-generation manufacturing system, intelligent manufacturing enables better quality, higher productivity, lower cost, and increased manufacturing flexibility. The concept of sustainability is receiving increasing attention, and sustainable manufacturing is evolving. The digital twin is an emerging technology used in intelligent manufacturing that can grasp the state of intelligent manufacturing systems in real-time and predict system failures. Sustainable intelligent manufacturing based on a digital twin has advantages in practical applications. To fully understand the intelligent manufacturing that provides the digital twin, this study reviews both technologies and discusses the sustainability of intelligent manufacturing. Firstly, the relevant content of intelligent manufacturing, including intelligent manufacturing equipment, systems, and services, is analyzed. In addition, the sustainability of intelligent manufacturing is discussed. Subsequently, a digital twin and its application are introduced along with the development of intelligent manufacturing based on the digital twin technology. Finally, combined with the current status, the future development direction of intelligent manufacturing is presented.

Keywords

Intelligent manufacturing / Digital twin / Advanced manufacturing / Industry 4.0 / Sustainable manufacturing

References

[1] Waschull S, Bokhorst JAC, Molleman E, et al. Work design in future industrial production: transforming towards cyber-physical systems. Comput Ind Eng, 2019, 139: 105679

[2] Javed Y, Felemban M, Shawly T et al (2019) A partition-driven integrated security architecture for cyber-physical systems. arXiv:190103018[csSY]

[3] Van Der Zeeuw A, Van Deursen AJ, Jansen G. Inequalities in the social use of the internet of things: a capital and skills perspective. New Media Soc, 2019, 21(6): 1344-1361.

[4] Habibi M, Fazli M, Movaghar A. Efficient distribution of requests in federated cloud computing environments utilizing statistical multiplexing. Future Gener Comput Syst, 2019, 90: 451-460.

[5] Yan H, Yu P, Long D (2019) Study on deep unsupervised learning optimization algorithm based on cloud computing. In: 2019 international conference on intelligent transportation, Big data & smart city (ICITBS), pp 679–681

[6] He B, Pan QJ, Deng ZQ. Product carbon footprint for product life cycle under uncertainty. J Clean Prod, 2018, 187: 459-472.

[7] Radhi H. Multi-objective optimization of turning process during machining of AISI 1025 on CNC machine using multi-objective particle swarm optimization. Univ Thi-Qar J Eng Sci, 2019, 10(1): 65-70.

[8] He B, Cao XY, Gu ZC. Kinematics of underactuated robotics for product carbon footprint. J Clean Prod, 2020, 257: 120491

[9] Chiaverini S, Siciliano B, Egeland O. Review of the damped least-squares inverse kinematics with experiments on an industrial robot manipulator. IEEE Trans Control Syst Technol, 1994, 2(2): 123-134.

[10] Altintas Y, Yang J, Kilic ZM. Virtual prediction and constraint of contour errors induced by cutting force disturbances on multi-axis CNC machine tools. CIRP Ann, 2019, 68(1): 377-380.

[11] Zheng P, Wang HH, Sang ZQ, et al. Smart manufacturing systems for Industry 4.0: conceptual framework, scenarios, and future perspectives. Front Mech Eng, 2018, 13(2): 137-150.

[12] Tao F, Qi QL, Liu A, et al. Data-driven smart manufacturing. J Manuf Syst, 2018, 48: 157-169.

[13] Zhong RY, Xu X, Klotz E, et al. Intelligent manufacturing in the context of Industry 4.0: a review. Engineering, 2017, 3(5): 616-630.

[14] Yadav A, Jayswal SC. Modelling of flexible manufacturing system: a review. Int J Prod Res, 2017, 56(7): 2464-2487.

[15] Li BH, Hou BC, Yu WT, et al. Applications of artificial intelligence in intelligent manufacturing: a review. Front Inf Technol Electron Eng, 2017, 18(1): 86-96.

[16] Kusiak A. Smart manufacturing. Int J Prod Res, 2017, 56(1/2): 508-517.

[17] He B, Hua YC. Feature-based integrated product model for low-carbon conceptual design. J Eng Des, 2017, 28(6): 408-432.

[18] Bouzary H, Frank Chen F. Service optimal selection and composition in cloud manufacturing: a comprehensive survey. Int J Adv Manuf Technol, 2018, 97(1/4): 795-808.

[19] Bouzary H, Chen FF, Krishnaiyer K. Service matching and selection in cloud manufacturing: a state-of-the-art review. Procedia Manuf, 2018, 26: 1128-1136.

[20] Bauer D, Stock D, Bauernhansl T. Movement towards service-orientation and app-orientation in manufacturing it. Procedia CIRP, 2017, 62: 199-204.

[21] Giret A, Garcia E, Botti V. An engineering framework for service-oriented intelligent manufacturing systems. Comput Ind, 2016, 81: 116-127.

[22] Cao Y, Wang SL, Kang L, et al. Study on machining service modes and resource selection strategies in cloud manufacturing. Int J Adv Manuf Technol, 2015, 81(1/4): 597-613.

[23] He B, Zhang D, Gu ZC, et al. Skeleton model-based product low carbon design optimization. J Clean Prod, 2020.

[24] Grossmann IE. Optimization and management in manufacturing engineering: resource collaborative optimization and management through the internet of things. Optim Methods Softw, 2019, 34(1): 220-223.

[25] Soni R, Bhatia M, Singh T. Digital twin: intersection of mind and machine. Int J Comput Intell IoT, 2019, 2(3): 667-670.

[26] Zheng P, Lin Y, Chen CH, et al. Smart, connected open architecture product: an IT-driven co-creation paradigm with lifecycle personalization concerns. Int J Prod Res, 2018, 57(8): 2571-2584.

[27] Nikolakis N, Alexopoulos K, Xanthakis E, et al. The digital twin implementation for linking the virtual representation of human-based production tasks to their physical counterpart in the factory-floor. Int J Comput Integr Manuf, 2019, 32(1): 1-12.

[28] Wang SY, Wan JF, Zhang DQ, et al. Towards smart factory for Industry 4.0: a self-organized multi-agent system with big data based feedback and coordination. Comput Netw, 2016, 101: 158-168.

[29] Grieves M (2014) Digital twin: manufacturing excellence through virtual factory replication. White paper, pp 1–7

[30] Abdulmotaleb ES. Digital twins: the convergence of multimedia technologies. IEEE Multimed, 2018, 25(2): 87-92.

[31] Negri E, Fumagalli L, Macchi M. A review of the roles of digital twin in cps-based production systems. Procedia Manuf, 2017, 11: 939-948.

[32] Chhetri MB, Krishnaswamy S, Loke SW, et al. Bussler C, et al. Smart virtual counterparts for learning communities. Web information systems—WISE 2004 workshops, WISE 2004. Lecture notes in computer science, 2004, Berlin: Springer 125-134.

[33] Glaessgen E, Stargel D (2012) The digital twin paradigm for future NASA and U.S. Air force vehicles. In: 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, structural dynamics and materials conference, pp 1–14

[34] Lee J, Bagheri B, Kao H-A. A cyber-physical systems architecture for Industry 4.0-based manufacturing systems. Manuf Lett, 2015, 3: 18-23.

[35] Söderberg R, Wärmefjord K, Carlson JS, et al. Toward a digital twin for real-time geometry assurance in individualized production. CIRP Ann, 2017, 66(1): 137-140.

[36] Bolton RN, McColl-Kennedy JR, Cheung L, et al. Customer experience challenges: bringing together digital, physical and social realms. J Serv Manag, 2018, 29(5): 776-808.

[37] Tao F, Sui FY, Liu A, et al. Digital twin-driven product design framework. Int J Prod Res, 2018, 57(12): 3935-3953.

[38] Hu LW, Nguyen NT, Tao WJ, et al. Modeling of cloud-based digital twins for smart manufacturing with mt connect. Procedia Manuf, 2018, 26: 1193-1203.

[39] Tao F, Cheng JF, Qi QL, et al. Digital twin-driven product design, manufacturing and service with big data. Int J Adv Manuf Technol, 2017, 94(9–12): 3563-3576.

[40] Schleich B, Anwer N, Mathieu L, et al. Shaping the digital twin for design and production engineering. CIRP Ann, 2017, 66(1): 141-144.

[41] Haag S, Anderl R. Digital twin—proof of concept. Manuf Lett, 2018, 15: 64-66.

[42] Guo JP, Zhao N, Sun L, et al. Modular based flexible digital twin for factory design. J Ambient Intell Hum Comput, 2018, 10(3): 1189-1200.

[43] Bao JS, Guo DS, Li J, et al. The modelling and operations for the digital twin in the context of manufacturing. Enterp Inf Syst, 2018, 13(4): 534-556.

[44] Cheng Y, Tao F, Xu LD, et al. Advanced manufacturing systems: supply-demand matching of manufacturing resource based on complex networks and internet of things. Enterp Inf Syst, 2016, 12(7): 780-797.

[45] Bilberg A, Malik AA. Digital twin driven human–robot collaborative assembly. CIRP Ann, 2019, 68(1): 499-502.

[46] Um J, Weyer S, Quint F. Plug-and-simulate within modular assembly line enabled by digital twins and the use of automation ML. IFAC-PapersOnLine, 2017, 50(1): 15904-15909.

[47] Qi QL, Tao F, Zuo Y, et al. Digital twin service towards smart manufacturing. Procedia CIRP, 2018, 72: 237-242.

[48] Leng JW, Zhang H, Yan DX, et al. Digital twin-driven manufacturing cyber-physical system for parallel controlling of smart workshop. J Ambient Intell Hum Comput, 2018, 10(3): 1155-1166.

[49] Cheng Y, Zhang YP, Ji P, et al. Cyber-physical integration for moving digital factories forward towards smart manufacturing: a survey. Int J Adv Manuf Technol, 2018, 97(1/4): 1209-1221.

[50] Meng SH, Tang SL, Zhu YH, et al. Digital twin-driven control method for robotic automatic assembly system. IOP Conf Ser Mater Sci Eng, 2019, 493: 012128

[51] Xiang F, Zhi Z, Jiang GZ (2018) Digital twins technology and its data fusion in iron and steel product life cycle. In: 2018 IEEE 15th international conference on networking, sensing and control (ICNSC), pp 1–5

[52] Zhang H, Liu Q, Chen X, et al. A digital twin-based approach for designing and multi-objective optimization of hollow glass production line. IEEE Access, 2017, 5: 26901-26911.

[53] Zhuang CB, Liu JH, Xiong H. Digital twin-based smart production management and control framework for the complex product assembly shop-floor. Int J Adv Manuf Technol, 2018, 96(1/4): 1149-1163.

[54] Liu Q, Zhang H, Leng JW, et al. Digital twin-driven rapid individualised designing of automated flow-shop manufacturing system. Int J Prod Res, 2018, 57: 3903-3919.

[55] Liau Y, Lee H, Ryu K. Digital twin concept for smart injection molding. IOP Conf Ser Mater Sci Eng, 2018, 324: 012077

[56] Botkina D, Hedlind M, Olsson B, et al. Digital twin of a cutting tool. Procedia CIRP, 2018, 72: 215-218.

[57] Pairet È, Ardón P, Liu X et al (2019) A digital twin for human–robot interaction. In: 2019 14th ACM/IEEE international conference on human-robot interaction (HRI), pp 372-372

[58] Voinov N, Chernorutsky I, Drobintsev P, et al. An approach to net-centric control automation of technological processes within industrial IoT systems. Adv Manuf, 2017, 5(4): 388-393.

[59] Uhlemann THJ, Schock C, Lehmann C, et al. The digital twin: demonstrating the potential of real time data acquisition in production systems. Procedia Manuf, 2017, 9: 113-120.

[60] Coronado PDU, Lynn R, Louhichi W, et al. Part data integration in the shop floor digital twin: mobile and cloud technologies to enable a manufacturing execution system. J Manuf Syst, 2018, 48: 25-33.

[61] Schluse M, Priggemeyer M, Atorf L, et al. Experimentable digital twins—streamlining simulation-based systems engineering for Industry 4.0. IEEE Trans Ind Inf, 2018, 14(4): 1722-1731.

[62] Macchi M, Roda I, Negri E, et al. Exploring the role of digital twin for asset lifecycle management. IFAC-PapersOnLine, 2018, 51(11): 790-795.

[63] Kunath M, Winkler H. Integrating the digital twin of the manufacturing system into a decision support system for improving the order management process. Procedia CIRP, 2018, 72: 225-231.

[64] Biesinger F, Meike D, Kraß B et al (2018) A case study for a digital twin of body-in-white production systems general concept for automated updating of planning projects in the digital factory. In: 2018 IEEE 23rd international conference on emerging technologies and factory automation (ETFA), pp 19–26

[65] Vachálek J, Bartalský L, Rovný O et al (2017) The digital twin of an industrial production line within the Industry 4.0 concept. In: 2017 21st international conference on process control (PC), pp 258–262

[66] Uhlemann THJ, Lehmann C, Steinhilper R. The digital twin: realizing the cyber-physical production system for Industry 4.0. Procedia CIRP, 2017, 61: 335-340.

[67] Tao F, Zhang M. Digital twin shop-floor: a new shop-floor paradigm towards smart manufacturing. IEEE Access, 2017, 5: 20418-20427.

[68] He B, Deng ZQ, Huang S, et al. Application of unascertained number for the integration of carbon footprint in conceptual design. Proc Inst Mech Eng J Eng Manuf, 2014, 229(11): 2088-2092.

[69] Martinez HV, Neely AD, Ouyang A, et al. Service business model innovation: the digital twin technology. EurOMA, 2019.

[70] Liu Y, Zhang L, Yang Y, et al. A novel cloud-based framework for the elderly healthcare services using digital twin. IEEE Access, 2019, 7: 49088-49101.

[71] Balachandar S, Chinnaiyan R (2019) Reliable digital twin for connected footballer. In: International conference on computer networks and communication technologies. pp 185–191

[72] Guivarch D, Mermoz E, Marino Y, et al. Creation of helicopter dynamic systems digital twin using multibody simulations. CIRP Ann, 2019, 68(1): 133-136.

[73] Tao F, Zhang M, Liu YS, et al. Digital twin driven prognostics and health management for complex equipment. CIRP Ann, 2018, 67(1): 169-172.

[74] Lynn R, Chen A, Locks S, et al. et al. Umeda S, Nakano M, Mizuyama H, et al. et al. Intelligent and accessible data flow architectures for manufacturing system optimization. Advances in production management systems: innovative production management towards sustainable growth, 2015, Berlin: Springer 27-35.

[75] Luo W, Hu T, Zhang C, et al. Digital twin for CNC machine tool: modeling and using strategy. J Ambient Intell Hum Comput, 2018, 10(3): 1129-1140.

[76] Li CZ, Mahadevan S, Ling Y, et al. Dynamic bayesian network for aircraft wing health monitoring digital twin. AIAA J, 2017, 55(3): 930-941.

[77] Kaebernick H, Kara S, Sun M. Sustainable product development and manufacturing by considering environmental requirements. Robot Comput Integr Manuf, 2003, 19(6): 461-468.

[78] Rusinko C. Green manufacturing: an evaluation of environmentally sustainable manufacturing practices and their impact on competitive outcomes. IEEE Trans Eng Manag, 2007, 54(3): 445-454.

[79] Miller G, Pawloski J, Standridge CR. A case study of lean, sustainable manufacturing. J Ind Eng Manag, 2010, 3(1): 11-32.

[80] Akbar M, Irohara T. Scheduling for sustainable manufacturing: a review. J Clean Prod, 2018, 205: 866-883.

[81] Carvalho N, Chaim O, Cazarini E, et al. Manufacturing in the fourth industrial revolution: a positive prospect in sustainable manufacturing. Procedia Manuf, 2018, 21: 671-678.

[82] Gbededo MA, Liyanage K, Garza-Reyes JA. Towards a life cycle sustainability analysis: a systematic review of approaches to sustainable manufacturing. J Clean Prod, 2018, 184: 1002-1015.

[83] Koren Y, Gu X, Badurdeen F, et al. Sustainable living factories for next generation manufacturing. Procedia Manuf, 2018, 21: 26-36.

[84] Stoycheva S, Marchese D, Paul C, et al. Multi-criteria decision analysis framework for sustainable manufacturing in automotive industry. J Clean Prod, 2018, 187: 257-272.

[85] Moldavska A, Welo T. A holistic approach to corporate sustainability assessment: incorporating sustainable development goals into sustainable manufacturing performance evaluation. J Manuf Syst, 2019, 50: 53-68.

[86] Physicsweb. http://www.Miit.Gov.Cn/n1146295/n1652858/n1652930/n3757016/c6429243/content.Html. Accessed 14 Aug 2018

[87] Stock T, Seliger G. Opportunities of sustainable manufacturing in Industry 4.0. Procedia CIRP, 2016, 40: 536-541.

[88] Garetti M, Taisch M. Sustainable manufacturing: trends and research challenges. Prod Plan Control, 2012, 23(2/3): 83-104.

[89] He B, Zhou GF, Hou SC, et al. An approach to computational co-evolutionary product design. Int J Adv Manuf Technol, 2016, 90(1/4): 249-265.

[90] Kang HS, Lee JY, Choi S, et al. Smart manufacturing: past research, present findings, and future directions. Int J Precis Eng Manuf Green Technol, 2016, 3(1): 111-128.

[91] Walshe K, McKee M, McCarthy M, et al. Health systems and policy research in Europe: Horizon 2020. Lancet, 2013, 382(9893): 668-669.

[92] Hemphill TA. Policy debate: the US advanced manufacturing initiative: will it be implemented as an innovation—or industrial—policy?. Innovation, 2014, 16(1): 67-70.

[93] Lewis P, Bell K. Understanding the UK’s productivity problems: new technological solutions or a case for the renewal of old institutions?. Employ Relat Int J, 2019, 41(2): 296-312.

[94] Radanliev P, De Roure D, Nurse JR et al (2019) New developments in cyber physical systems, the internet of things and the digital economy—discussion on future developments in the industrial internet of things and Industry 4.0. Preprints 2019, 2019030094

[95] Yeung G. ‘Made in China 2025’: the development of a new energy vehicle industry in China. Area Dev Policy, 2019, 4(1): 39-59.

[96] Zhou GH, Zhang C, Li Z, et al. Knowledge-driven digital twin manufacturing cell towards intelligent manufacturing. Int J Prod Res, 2019, 58: 1034-1051.

[97] Lohtander M, Ahonen N, Lanz M, et al. Micro manufacturing unit and the corresponding 3D-model for the digital twin. Procedia Manuf, 2018, 25: 55-61.

[98] Zhang YZ, Mu LM, Shen GX, et al. Fault diagnosis strategy of CNC machine tools based on cascading failure. J Intell Manuf, 2019, 30(5): 2193-2202.

[99] Villalonga A, Beruvides G, Castaño F, et al. Condition-based monitoring architecture for CNC machine tools based on global knowledge. IFAC-PapersOnLine, 2018, 51(11): 200-204.

[100] Yang HT, Li L, Zhang SD et al (2019) Critical point determination method of thermal-force coupling deformation of CNC machine tool bed. In: Tenth international symposium on precision engineering measurements and instrumentation, pp 1105325

[101] Wei XY, Miao EM, Liu H, et al. Two-dimensional thermal error compensation modeling for worktable of CNC machine tools. Int J Adv Manuf Technol, 2019, 101(1/4): 501-509.

[102] Jiang ZP, Gao D, Lu Y, et al. Electrical energy consumption of CNC machine tools based on empirical modeling. Int J Adv Manuf Technol, 2019, 100(9/12): 2255-2267.

[103] Krimpenis AA, Fountas NA. Balancing multiple criteria in formulation of weighted, single-objective genetic algorithm optimization for CNC machining problems. Adv Manuf, 2016, 4(2): 178-188.

[104] Xu X. Machine tool 4.0 for the new era of manufacturing. Int J Adv Manuf Technol, 2017, 92(5/8): 1893-1900.

[105] Jeon JW, Ha YY. A generalized approach for the acceleration and deceleration of industrial robots and CNC machine tools. IEEE Trans Ind Electron, 2000, 47(1): 133-139.

[106] Kim DI, Kim S. An iterative learning control method with application for CNC machine tools. IEEE Trans Ind Appl, 1996, 32(1): 66-72.

[107] Keller A, Kamath A, Perera U. Reliability analysis of CNC machine tools. Reliab Eng, 1982, 3(6): 449-473.

[108] Yamato S, Yamada Y, Nakanishi K, et al. Integrated in-process chatter monitoring and automatic suppression with adaptive pitch control in parallel turning. Adv Manuf, 2018, 6(3): 291-300.

[109] He B, Wang J, Huang S, et al. Low-carbon product design for product life cycle. J Eng Des, 2015, 26(10–12): 321-339.

[110] Li YJ, Wang GC, Cui HY, et al. Dynamic characteristics and optimization research on PVDF piezoelectric film force sensor for steel ball cold heading machine. ISA Trans, 2019, 94: 265-275.

[111] He B, Xue HJ, Liu LL, et al. Rigid-flexible coupling virtual prototyping-based approach to the failure mode, effects, and criticality analysis. Int J Adv Manuf Technol, 2019, 100(5/8): 1695-1717.

[112] Li ZM. The knowledge expression for the low carbon economy of cold heading machine. J Low Carbon Econ, 2016, 05(02): 20-25.

[113] Zhang SL, Wang S, Jing FS, et al. A sensorless hand guiding scheme based on model identification and control for industrial robot. IEEE Trans Ind Inf, 2019, 15: 5204-5213.

[114] Pérez L, Diez E, Usamentiaga R, et al. Industrial robot control and operator training using virtual reality interfaces. Comput Ind, 2019, 109: 114-120.

[115] Wu JH, Han X, Tao YR. Kinematic response of industrial robot with uncertain-but-bounded parameters using interval analysis method. J Mech Sci Technol, 2019, 33(1): 333-340.

[116] Chen Z, Zhou W (2017) Path planning for a space-based manipulator system based on quantum genetic algorithm. J Robot. 3207950

[117] Guo S, Fang TT, Song T, et al. Tracking and localization for omni-directional mobile industrial robot using reflectors. Adv Manuf, 2018, 6(1): 118-125.

[118] Slavkovic N, Zivanovic S, Milutinovic D. An indirect method of industrial robot programming for machining tasks based on STEP-NC. Int J Comput Integr Manuf, 2019, 32(1): 43-57.

[119] Lyu H, Liu Y, Guo JY, et al. Tool-path generation for industrial robotic surface-based application. Adv Manuf, 2019, 7(1): 64-72.

[120] Berg J, Lottermoser A, Richter C, et al. Human-robot-interaction for mobile industrial robot teams. Procedia CIRP, 2019, 79: 614-619.

[121] Norrlof M. An adaptive iterative learning control algorithm with experiments on an industrial robot. IEEE Trans Rob Autom, 2002, 18(2): 245-251.

[122] Gao Z, Zeng L, He B, et al. Type synthesis of non-holonomic spherical constraint underactuated parallel robotics. Acta Astronaut, 2018, 152: 509-520.

[123] He B, Wang S, Liu Y. Underactuated robotics: a review. Int J Adv Robot Syst, 2019, 16(4): 1-29.

[124] He B, Zhang P, Liu W, et al. Dynamics analysis and numerical simulation of a novel underactuated robot wrist. Proc Inst Mech Eng J Eng Manuf, 2017, 231(12): 2145-2158.

[125] Fúnez Guerra C, Reyes-Bozo L, Vyhmeister E, et al. Viability analysis of underground mining machinery using green hydrogen as a fuel. Int J Hydrogen Energy, 2019, 45: 5112-5121.

[126] Islam MS, Peter N, Wiens T. Simulation and experiment of vibrational or acoustic communication in mining and oil-gas drill strings. Trans Can Soc Mech Eng, 2019, 43: 454-462.

[127] Andreev V, Voronkova L, Lybianoi D. Innovative technology of manufacturing of reusable metallurgical equipment with increased operational resistance from the blast furnace cast iron of the first melting. J Mater Sci Res Rev, 2019, 2: 1-8.

[128] Indri M, Lachello L, Lazzero I, et al. Smart sensors applications for a new paradigm of a production line. Sensors, 2019, 19(3): 650.

[129] Dong X, Ma R. Optimization of the LPCVD equipment intergraded production system of the solar cell production line. AIP Conf Proc, 2019, 2122(1): 1-5.

[130] Wang J, Li D. Task scheduling based on a hybrid heuristic algorithm for smart production line with fog computing. Sensors, 2019, 19(5): 1-18.

[131] Hwang I, Jang YJ, Choi H. Overhead shuttle design for a flat panel display production line considering the contactless power supply capacity. Comput Ind Eng, 2018, 126: 232-242.

[132] Gao Y, Lyu H, Hou Y et al (2019) Real-time modeling and simulation method of digital twin production line. In: 2019 IEEE 8th joint international information technology and artificial intelligence conference (ITAIC), pp 1639–1642

[133] He B, Wang J, Deng ZQ. Cost-constrained low-carbon product design. Int J Adv Manuf Technol, 2015, 79(9/12): 1821-1828.

[134] Andiappan V, Benjamin MFD, Tan RR, et al. An integrated framework to address criticality in biomass tri-generation systems via redundancy allocation. Process Integr Optim Sustain, 2019, 3(1): 65-73.

[135] Guan D, Feng S, Zhang L, et al. Mesoscale simulation for heavy petroleum system using structural unit and dissipative particle dynamics (SU–DPD) frameworks. Energy Fuel, 2019, 33(2): 1049-1060.

[136] Lemu HG. Current status and challenges of using geometric tolerance information in intelligent manufacturing systems. Adv Manuf, 2014, 2(1): 13-21.

[137] Sun J, Xi J, Chen X, et al. A CAD/CAM system for fabrication of facial prostheses. Rapid Prototyp J, 2011, 17(4): 253-261.

[138] Lv YQ, Lin DP. Design an intelligent real-time operation planning system in distributed manufacturing network. Ind Manag Data Syst, 2017, 117(4): 742-753.

[139] Gu X, Jin XN, Ni J, et al. Manufacturing system design for resilience. Procedia CIRP, 2015, 36: 135-140.

[140] Maturana F, Shen W, Norrie DH. Metamorph: an adaptive agent-based architecture for intelligent manufacturing. Int J Prod Res, 1999, 37(10): 2159-2173.

[141] He B, Hou S, Song W. Integrating engineering design and analysis using a parameter constraint graph approach. Simulation, 2015, 91(7): 625-647.

[142] He B, Hua Y. Synthesis of mechanisms integrated with motion and force transformation. Int J Precis Eng Manuf, 2016, 17(12): 1643-1649.

[143] He B, Huang S. Functional synthesis of mechanisms under cost consideration. Proc Inst Mech Eng J Eng Manuf, 2016, 230(1): 91-99.

[144] He B, Song W, Wang Y. Computational conceptual design using space matrix. J Comput Inf Sci Eng, 2015, 15(1): 1-7.

[145] He B, Song W, Wang YG. A feature-based approach towards an integrated product model in intelligent design. Int J Adv Manuf Technol, 2013, 69(1/4): 15-30.

[146] He B, Zhang P, Wang J. Automated synthesis of mechanisms with consideration of mechanical efficiency. J Eng Des, 2014, 25(4/6): 213-237.

[147] He B, Zhang P, Zhu N, et al. Skeleton model-based approach to integrated engineering design and analysis. Int J Adv Manuf Technol, 2016, 85(5): 1105-1115.

[148] He B, Ostrosi E, Pfaender F, et al. et al. Cha J, Chou SY, Stjepandic J, et al. et al. Intelligent engineering design of complex city: a co-evolution model. Moving integrated product development to service clouds in the global economy, 2014, Amsterdam: IOS Press 434-443.

[149] He B, Luo T, Huang S. Product sustainability assessment for product life cycle. J Clean Prod, 2019, 206: 238-250.

[150] He B, Deng ZQ, Huang S, et al. Application of unascertained number for the integration of carbon footprint in conceptual design. Proc Inst Mech Eng J Eng Manuf, 2015, 229(11): 2088-2092.

[151] Yu QY, He B. Tan J. Automated sustainable low-carbon design of offshore platform for product life cycle. Advances in mechanical design, 2020, Berlin: Springer 1-17.

[152] He B, Huang S, Wang J. Product low-carbon design using dynamic programming algorithm. Int J Precis Eng Manuf Green Technol, 2015, 2(1): 37-42.

[153] He B, Tang W, Wang J. Product model integrated with carbon footprint for low-carbon design. Int J Precis Eng Manuf, 2015, 16(11): 2383-2388.

[154] He B, Feng P. Guiding conceptual design through functional space exploration. Int J Adv Manuf Technol, 2012, 66(9/12): 1999-2011.

[155] Gregor M, Hercko J, Fusko M, et al. et al. Caganova D, Balog M, Knapcikova L, et al. et al. Zilina intelligent manufacturing system: best practice of cooperation between university and research center. Smart technology trends in industrial and business management, 2019, Berlin: Springer 183-198.

[156] He B, Li FF, Cao XY, et al. Product sustainable design: a review from the environmental, economic, and social aspects. ASME J Comput Inf Sci Eng, 2020, 20: 040801

[157] He B, Wang YG, Song W, et al. Design resource management for virtual prototyping in product collaborative design. Proc Inst Mech Eng J Eng Manuf, 2014, 229(12): 2284-2300.

[158] Simeone A, Caggiano A, Boun L, et al. Intelligent cloud manufacturing platform for efficient resource sharing in smart manufacturing networks. Procedia CIRP, 2019, 79: 233-238.

[159] Wang S, Liang YC, Li WD, et al. Big data enabled intelligent immune system for energy efficient manufacturing management. J Clean Prod, 2018, 195: 507-520.

[160] Stadnicka D, Litwin P, Antonelli D. Human factor in intelligent manufacturing systems—knowledge acquisition and motivation. Procedia CIRP, 2019, 79: 718-723.

[161] He B, Tang W, Wang J, et al. Low-carbon conceptual design based on product life cycle assessment. Int J Adv Manuf Technol, 2015, 81(5/8): 863-874.

[162] Tao F, Cheng Y, Xu LD, et al. CCIOT-CMFG: cloud computing and internet of things-based cloud manufacturing service system. IEEE Trans Ind Inf, 2014, 10(2): 1435-1442.

[163] Lin YC, Hung MH, Huang HC, et al. Development of advanced manufacturing cloud of things (AMCOT)—a smart manufacturing platform. IEEE Rob Autom Lett, 2017, 2(3): 1809-1816.

[164] He B, Zhang P, Liu L. Simultaneous functional synthesis of mechanisms with mechanical efficiency and cost. Int J Adv Manuf Technol, 2014, 75(5/8): 659-665.

[165] Zhang YF, Qian C, Lyu JX, et al. Agent and cyber-physical system based self-organizing and self-adaptive intelligent shopfloor. IEEE Trans Ind Inf, 2017, 13(2): 737-747.

[166] Lee CKM, Zhang SZ, Ng KKH. Development of an industrial internet of things suite for smart factory towards re-industrialization. Adv Manuf, 2017, 5(4): 335-343.

[167] He B, Niu YC, Hou SC, et al. Sustainable design from functional domain to physical domain. J Clean Prod, 2018, 197: 1296-1306.

[168] Helo P, Suorsa M, Hao Y, et al. Toward a cloud-based manufacturing execution system for distributed manufacturing. Comput Ind, 2014, 65(4): 646-656.

[169] Guo QL, Zhang M. A novel approach for multi-agent-based intelligent manufacturing system. Inf Sci, 2009, 179(18): 3079-3090.

[170] Ji X, He G, Xu JJ, et al. Study on the mode of intelligent chemical industry based on cyber-physical system and its implementation. Adv Eng Software, 2016, 99: 18-26.

[171] Tao F, Zuo Y, Xu LD, et al. IoT-based intelligent perception and access of manufacturing resource toward cloud manufacturing. IEEE Trans Ind Inf, 2014, 10(2): 1547-1557.

[172] Jain P, Poon J, Singh JP, et al. A digital twin approach for fault diagnosis in distributed photovoltaic system. IEEE Trans Power Electron, 2019, 35: 940-956.

[173] Liu MZ, Ma J, Lin L, et al. Intelligent assembly system for mechanical products and key technology based on internet of things. J Intell Manuf, 2014, 28(2): 271-299.

[174] Tang H, Li D, Wang SY, et al. Casoa: an architecture for agent-based manufacturing system in the context of Industry 4.0. IEEE Access, 2018, 6: 12746-12754.

[175] Chaplin J, Bakker O, de Silva L, et al. Evolvable assembly systems: a distributed architecture for intelligent manufacturing. IFAC-PapersOnLine, 2015, 48(3): 2065-2070.

[176] Wang KS. Towards zero-defect manufacturing (ZDM)—a data mining approach. Adv Manuf, 2013, 1(1): 62-74.

[177] Liu C, Jiang PY. A cyber-physical system architecture in shop floor for intelligent manufacturing. Procedia CIRP, 2016, 56: 372-377.

[178] Wan JF, Yi ML, Li D, et al. Mobile services for customization manufacturing systems: an example of Industry 4.0. IEEE Access, 2016, 4: 8977-8986.

[179] Zhao QJ, Cao P, Tu DW. Toward intelligent manufacturing: label characters marking and recognition method for steel products with machine vision. Adv Manuf, 2014, 2(1): 3-12.

[180] Liu CW, Chien CF. An intelligent system for wafer bin map defect diagnosis: an empirical study for semiconductor manufacturing. Eng Appl Artif Intell, 2013, 26(5/6): 1479-1486.

[181] Strandhagen JW, Alfnes E, Strandhagen JO, et al. The fit of Industry 4.0 applications in manufacturing logistics: a multiple case study. Adv Manuf, 2017, 5(4): 344-358.

[182] Chen RY. An intelligent value stream-based approach to collaboration of food traceability cyber physical system by fog computing. Food Control, 2017, 71: 124-136.

[183] Maoudj A, Bouzouia B, Hentout A, et al. Distributed multi-agent scheduling and control system for robotic flexible assembly cells. J Intell Manuf, 2017, 30(4): 1629-1644.

[184] Barenji AV, Barenji RV, Hashemipour M. Flexible testing platform for employment of RFID-enabled multi-agent system on flexible assembly line. Adv Eng Softw, 2016, 91: 1-11.

[185] Wang KS. Intelligent and integrated RFID (II-RFID) system for improving traceability in manufacturing. Adv Manuf, 2014, 2(2): 106-120.

[186] Zhong RY, Dai QY, Qu T, et al. RFID-enabled real-time manufacturing execution system for mass-customization production. Robot Comput Integr Manuf, 2013, 29(2): 283-292.

[187] Leng JW, Jiang PY. Dynamic scheduling in RFID-driven discrete manufacturing system by using multi-layer network metrics as heuristic information. J Intell Manuf, 2017, 30(3): 979-994.

[188] Guo ZX, Wong WK, Guo CX. A cloud-based intelligent decision-making system for order tracking and allocation in apparel manufacturing. Int J Prod Res, 2013, 52(4): 1100-1115.

[189] Qiu C (2018) Implementation of vehicle mobile sales cloud management system based on intelligent community. In: 2018 14th international conference on computational intelligence and security (CIS), pp 341–344

[190] Zhang XY, Ming XG, Liu ZW, et al. An overall framework and subsystems for smart manufacturing integrated system (SMIS) from multi-layers based on multi-perspectives. Int J Adv Manuf Technol, 2019, 103: 703-722.

[191] He B, Liu YJ, Zeng LB, et al. Product carbon footprint across sustainable supply chain. J Clean Prod, 2020, 241: 118320

[192] Sun HT, Peng C, Zhou P, et al. A brief overview on secure control of networked systems. Adv Manuf, 2017, 5(3): 243-250.

[193] McFarlane D, Sarma S, Chirn JL, et al. Auto ID systems and intelligent manufacturing control. Eng Appl Artif Intell, 2003, 16(4): 365-376.

[194] Cui FZ, Xu ZZ, Wang XK, et al. A dual-system cooperative co-evolutionary algorithm for satellite equipment layout optimization. Proc Inst Mech Eng G J Aerosp Eng, 2018, 232(13): 2432-2457.

[195] Malik AA, Bilberg A (2018) Phygital workspace as a digital twin for design & planning of smart factories, pp 1–2

[196] Yin Y, Sun L, Guo C. A policy of conflict negotiation based on fuzzy matter element particle swarm optimization in distributed collaborative creative design. Comput Aided Des, 2008, 40(10/11): 1009-1014.

[197] Wang Y, Ma HS, Yang JH, et al. Industry 4.0: a way from mass customization to mass personalization production. Adv Manuf, 2017, 5(4): 311-320.

[198] Rødseth H, Schjølberg P, Marhaug A. Deep digital maintenance. Adv Manuf, 2017, 5(4): 299-310.

[199] Gamboa Quintanilla F, Cardin O, L’Anton A, et al. A modeling framework for manufacturing services in service-oriented holonic manufacturing systems. Eng Appl Artif Intell, 2016, 55: 26-36.

[200] He B, Zhu XR, Zhang D. Boundary encryption-based Monte Carlo learning method for workspace modeling. ASME J Comp Inf Sci Eng, 2020, 20: 034502.

[201] Li F, Zhang L, Liu YK, et al. A clustering network-based approach to service composition in cloud manufacturing. Int J Comput Integr Manuf, 2017, 30(12): 1331-1342.

[202] Lu YQ, Xu X. A semantic web-based framework for service composition in a cloud manufacturing environment. J Manuf Syst, 2017, 42: 69-81.

[203] Zhang S, Xu YB, Zhang WY, et al. A new fuzzy QOS-aware manufacture service composition method using extended flower pollination algorithm. J Intell Manuf, 2017, 30(5): 2069-2083.

[204] Zhou JJ, Yao XF. A hybrid artificial bee colony algorithm for optimal selection of QOS-based cloud manufacturing service composition. Int J Adv Manuf Technol, 2016, 88(9/12): 3371-3387.

[205] Yao F, Yao YP, Xing LN, et al. An intelligent scheduling algorithm for complex manufacturing system simulation with frequent synchronizations in a cloud environment. Memet Comput, 2019, 11: 357-370.

[206] Ruiz N, Giret A, Botti V, et al. An intelligent simulation environment for manufacturing systems. Comput Ind Eng, 2014, 76: 148-168.

[207] Zheng Y, Yang S, Cheng HC. An application framework of digital twin and its case study. J Ambient Intell Hum Comput, 2018, 10(3): 1141-1153.

[208] Zhang C, Zhou G. A view-based 3D CAD model reuse framework enabling product lifecycle reuse. Adv Eng Softw, 2019, 127: 82-89.

[209] He B, Tang W, Huang S, et al. Towards low-carbon product architecture using structural optimization for lightweight. Int J Adv Manuf Technol, 2015, 83(5/8): 1419-1429.

[210] Bodrow W. The dynamic of professional knowledge utilized in software applications for process controlling. Adv Manuf, 2014, 2(2): 173-178.

[211] Giret A, Trentesaux D, Salido MA, et al. A holonic multi-agent methodology to design sustainable intelligent manufacturing control systems. J Clean Prod, 2017, 167: 1370-1386.

[212] Zhang C, Zhou G, Lu Q, et al. Graph-based knowledge reuse for supporting knowledge-driven decision-making in new product development. Int J Prod Res, 2017, 55(23): 7187-7203.

[213] Chai JF, Hu XM, Qu HW, et al. Production line 3D visualization monitoring system design based on OpenGL. Adv Manuf, 2018, 6(1): 126-135.

[214] Huang PB, Zhang HJ, Lin YC. Development of a grey online modeling surface roughness monitoring system in end milling operations. J Intell Manuf, 2017, 30(4): 1923-1936.

[215] Li Z, Wang Y, Wang KS. Intelligent predictive maintenance for fault diagnosis and prognosis in machine centers: Industry 4.0 scenario. Adv Manuf, 2017, 5(4): 377-387.

[216] Kim J, Hwangbo H. Real-time early warning system for sustainable and intelligent plastic film manufacturing. Sustainability, 2019, 11(5): 1490-1503.

[217] Guo ZX, Ngai EWT, Yang C, et al. An RFID-based intelligent decision support system architecture for production monitoring and scheduling in a distributed manufacturing environment. Int J Prod Econ, 2015, 159: 16-28.

[218] Tan DP, Zhang LB, Ai QL. An embedded self-adapting network service framework for networked manufacturing system. J Intell Manuf, 2016, 30(2): 539-556.

[219] Arica E, Powell DJ. A framework for ICT-enabled real-time production planning and control. Adv Manuf, 2014, 2(2): 158-164.

[220] Su Y, Ding X, Zheng H et al (2009) A new method of remote control for embedded terminal based on browser/server/terminal model. In: 2009 Pacific-Asia conference on circuits, communications and systems, pp 151–154

[221] Theorin A, Bengtsson K, Provost J, et al. An event-driven manufacturing information system architecture for Industry 4.0. Int J Prod Res, 2016, 55(5): 1297-1311.

[222] Xiao X, Wang SF, Zhang LJ, et al. Complexity analysis of manufacturing service ecosystem: a mapping-based computational experiment approach. Int J Prod Res, 2018, 57(2): 357-378.

[223] Baxter D, Roy R, Doultsinou A, et al. A knowledge management framework to support product-service systems design. Int J Comput Integr Manuf, 2009, 22(12): 1073-1088.

[224] Matsas M, Pintzos G, Kapnia A, et al. An integrated collaborative platform for managing product-service across their life cycle. Procedia CIRP, 2017, 59: 220-226.

[225] Balta EC, Lin Y, Barton K, et al. Production as a service: a digital manufacturing framework for optimizing utilization. IEEE Trans Autom Sci Eng, 2018, 15(4): 1483-1493.

[226] Cheng Y, Bi LN, Tao F, et al. Hypernetwork-based manufacturing service scheduling for distributed and collaborative manufacturing operations towards smart manufacturing. J Intell Manuf, 2018.

[227] Ren M, Ren L, Jain H. Manufacturing service composition model based on synergy effect: a social network analysis approach. Appl Soft Comput, 2018, 70: 288-300.

[228] Siderska J, Jadaan KS. Cloud manufacturing: a service-oriented manufacturing paradigm. A review paper. Eng Manag Prod Serv, 2018, 10(1): 22-31.

[229] He B, Feng PE. Research on collaborative conceptual design based on distributed knowledge resource. Int J Adv Manuf Technol, 2012, 66(5/8): 645-662.

[230] Yang YF, Yang B, Wang SL, et al. A dynamic ant-colony genetic algorithm for cloud service composition optimization. Int J Adv Manuf Technol, 2019, 102(1/4): 355-368.

[231] Zhou JJ, Yao XF. A hybrid approach combining modified artificial bee colony and cuckoo search algorithms for multi-objective cloud manufacturing service composition. Int J Prod Res, 2017, 55(16): 4765-4784.

[232] Zhang CL, Sheng BY, Yin XY, et al. Research and development of off-line services for the 3D automatic printing machine based on cloud manufacturing. J Ambient Intell Hum Comput, 2017, 10(3): 1109-1128.

[233] Huang BQ, Li CH, Tao F. A chaos control optimal algorithm for QOS-based service composition selection in cloud manufacturing system. Enterp Inf Syst, 2013, 8(4): 445-463.

[234] Guo L, Wang SL, Kang L, et al. Agent-based manufacturing service discovery method for cloud manufacturing. Int J Adv Manuf Technol, 2015, 81(9/12): 2167-2181.

[235] Song TX, Liu HM, Wei CM, et al. Common engines of cloud manufacturing service platform for SMES. Int J Adv Manuf Technol, 2014, 73(1/4): 557-569.

[236] DeSmit Z, Elhabashy AE, Wells LJ, et al. An approach to cyber-physical vulnerability assessment for intelligent manufacturing systems. J Manuf Syst, 2017, 43: 339-351.

[237] Wang KS, Sharma VS, Zhang ZY. SCADA data based condition monitoring of wind turbines. Adv Manuf, 2014, 2(1): 61-69.

[238] Feng Y, Huang BQ. Cloud manufacturing service QOS prediction based on neighbourhood enhanced matrix factorization. J Intell Manuf, 2018.

[239] Lartigau J, Xu XF, Nie LS, et al. Cloud manufacturing service composition based on QOS with geo-perspective transportation using an improved artificial bee colony optimisation algorithm. Int J Prod Res, 2015, 53(14): 4380-4404.

[240] Wang KS, Li Z, Braaten J, et al. Interpretation and compensation of backlash error data in machine centers for intelligent predictive maintenance using ANNs. Adv Manuf, 2015, 3(2): 97-104.

[241] Liu ZW, Ming XG. A framework with revised rough-DEMATEL to capture and evaluate requirements for smart industrial product-service system of systems. Int J Prod Res, 2019, 57: 7104-7122.

[242] Liu Q, Liu ZH, Xu WJ, et al. Human-robot collaboration in disassembly for sustainable manufacturing. Int J Prod Res, 2019, 57: 4027-4044.

[243] Dyllick T, Rost Z. Towards true product sustainability. J Clean Prod, 2017, 162: 346-360.

[244] He B, Gu ZC. Sustainable design synthesis for product environmental footprints. Des Stud, 2016, 45: 159-186.

[245] He B, Xiao JL, Deng ZQ. Product design evaluation for product environmental footprint. J Clean Prod, 2018, 172: 3066-3080.

[246] Manfredi S, Allacker K, Pelletier N et al (2012) Product environmental footprint (PEF) guide. European Commission

[247] He B, Shao Y, Wang S, et al. Product environmental footprints assessment for product life cycle. J Clean Prod, 2019, 233: 446-460.

Funding

National Natural Science Foundation of China http://dx.doi.org/10.13039/501100001809(51675319)