Fabrication and shape detection of a catheter using fiber Bragg grating
Xiang-Yan Chen , Ya-Nan Zhang , Lin-Yong Shen , Jin-Wu Qian , Jia-Ying Fan
Advances in Manufacturing ›› 2020, Vol. 8 ›› Issue (1) : 107 -118.
Fabrication and shape detection of a catheter using fiber Bragg grating
Considering the spatial position and shape detection properties of the fiber Bragg grating (FBG) curve sensor used in the human body, the positioning accuracy of the FBG curve sensor plays a major role in the pre-diagnosis and treatment of diseases. We present a new type of shape-sensing catheter (diameter of 2.0 mm and length of 810 mm) that is integrated with an array of four optical fibers, where each contains five nodes, to track the shape. Firstly, the distribution of the four orthogonal fiber gratings is wound around a nitinol wire using novel packaging technology, and the spatial curve shape is rebuilt based on the positioning of discrete points in space. An experimental platform is built, and then a reconstruction algorithm for coordinate point fitting of the Frenet frame is used to perform the reconstruction experiment on millimeter paper. The results show that, compared with those in previous studies, in 2D test, the maximum relative error for the end position is reduced to 2.74%, and in 3D reconstruction experiment, the maximum shape error is 3.43%, which verifies both the applicability of the sensor and the feasibility of the proposed method. The results reported here will provide an academic foundation and the key technologies required for navigation and positioning of non-invasive and minimally invasive surgical robots, intelligent structural health detection, and search and rescue operations in debris.
Fiber Bragg grating (FBG) / Thin diameter / Encapsulation positioning / Shape detection
| [1] |
Kulatunga TN, Ranasinghe RAGP, Ranathungar RAC et al (2013) Real time endoscope trajectory tracking in the 3D space using MEMS sensors. In: IEEE 8th international conference on industrial and information systems, pp 605–609 |
| [2] |
|
| [3] |
|
| [4] |
|
| [5] |
|
| [6] |
|
| [7] |
|
| [8] |
Shi C, Giannarou S, Lee SL et al (2014) Simultaneous catheter and environment modeling for trans-catheter aortic valve implantation. In: Proceedings of IEEE/RSJ international conference on intelligent robot and systems, pp 2024–2029 |
| [9] |
|
| [10] |
Zhang LW, Qian JW (2005) On SDM/WDM FBG sensor net for shape detection of endoscope. In: IEEE 2005 conference on mechatronics and automation, ICMA2005, pp 1986–1991 |
| [11] |
|
| [12] |
|
| [13] |
|
| [14] |
|
| [15] |
|
| [16] |
|
| [17] |
|
| [18] |
|
| [19] |
|
| [20] |
|
| [21] |
|
| [22] |
Dulieu-Barton JM, Quinn S, Ye CC (2009) Optical fiber Bragg grating strain sensors: modern stress and strain analysis. Eureka Mag 1–2 |
| [23] |
|
| [24] |
Zhang XG, Li XC (2008) Fabrication and characterization of optical microring sensors on metal substrates. Micromech Microeng 181–187 |
| [25] |
Krishnamurthy S (2006) Pre-stressed advanced fiber reinforced composites fabrication and mechanical performance, Dissertation, Cranfield University |
| [26] |
|
| [27] |
|
| [28] |
|
| [29] |
|
/
| 〈 |
|
〉 |