Dynamic interplay between dislocations and precipitates in creep aging of an Al-Zn-Mg-Cu alloy

Abstract

Creep age forming (CAF) is an advanced forming technology used for manufacturing large complex integrated panel components. However, in creep aging (CA), unlike in sole creep or aging procedure, the dislocation movement and the precipitation process occur simultaneously, leading to difficulty in understanding of the dynamic interplay between these two phenomena. In this work, taking 7050 Al alloy, a typical Al-Zn-Mg-Cu alloy, as the test material, an experimental scheme combining pre-deformation, artificial aging (AA), and tensile/compressive CA is designed to decouple and reveal the dynamic interaction mechanism of both phenomena. From AA experiments, the static interaction between dislocations and precipitates is studied, and then their dynamic interactions in CA and each evolution are comparatively investigated. The research shows that both total strain and strain rate increase with the increase in pre-deformation in tensile and compressive CA. However, the total creep strain in compressive CA is larger than that in tensile CA. In additional, the more the dislocations are induced, the sparser and more heterogeneous the overall distribution of precipitates becomes. For dynamic interplay, in the first stage of CA (I), under thermal-mechanical loading, the GP zones and η′ phases gradually nucleate and grow, while the effect of dislocation multiplication is dominant compared with dislocation annihilation, leading to an increase in total dislocation density. Soon, the dislocation movement is gradually hindered by tangling, pile-up, and the precipitates that have grown on the dislocation lines, this decreases the mobile dislocation density and results in a significant decrease in creep rate. In the second stage (II), the precipitates grow further, especially those lying on the dislocation lines; the effects of pinning and hindrance are enhanced until the dislocation multiplication and annihilation reach a dynamic equilibrium, and the total and mobile dislocation densities tend to be roughly unchanged, thus, the creep rate remains relatively constant in this stage.

Keywords

Creep aging (CA) / Dynamic interplay / Dislocation / Precipitate / Pre-deformation / Al-Zn-Mg-Cu alloy

References

[1] Zhan LH, Lin JG, Dean TA. A review of the development of creep age forming: experimentation, modelling and applications. Int J Mach Tool Manuf, 2011, 51(1): 1-17.

[2] Allen RM, Sande VD. A high resolution transmission electron microscope study of early stage precipitation on dislocation lines in Al-Zn-Mg. Metall Trans A, 1978, 9(9): 1251-1258.

[3] Deschamps A, Livet F, Bréchet Y. Influence of predeformation on ageing in an Al-Zn-Mg alloy—I. Microstructure evolution and mechanical properties. Acta Mater, 1998, 47(1): 281-292.

[4] Feng ZQ, Yang YQ, Huang B, et al. Precipitation process along dislocations in Al-Cu-Mg alloy during artificial aging. Mater Sci Eng A, 2010, 528(2): 706-714.

[5] Feng ZQ, Yang YQ, Huang B, et al. Variant selection and the strengthening effect of S precipitates at dislocations in Al-Cu-Mg alloy. Acta Mater, 2011, 59(6): 2412-2422.

[6] Kassner ME, Pérez-Prado MT. Fundamentals of creep in metals and alloys, 2004, Oxford: Butterworth-Heinemann

[7] Miresmaeili SM, Nami B (2014) Impression creep behavior of Al-1.9% Ni-1.6% Mn-1% Mg alloy. Mater Des 56 (4):286–290

[8] Sklenicka V, Dvorak J, Kral P, et al. Creep processes in pure aluminium processed by equal-channel angular pressing. Mater Sci Eng A, 2005, 410(12): 408-412.

[9] Nó ML, Juan JS. Structure and mobility of polygonized dislocation walls in high purity aluminium. Mater Sci Eng A, 1993, 164((s1–2)): 153-158.

[10] Li Y, Shi ZS, Lin JG, et al. A unified constitutive model for asymmetric tension and compression creep-ageing behaviour of naturally aged Al-Cu-Li alloy. Int J Plast, 2017, 89: 130-149.

[11] Zhang J, Deng YL, Zhang XM. Constitutive modeling for creep age forming of heat-treatable strengthening aluminum alloys containing plate or rod shaped precipitates. Mater Sci Eng A, 2013, 563(7): 8-15.

[12] Li Y, Shi ZS, Lin JG, et al. Extended application of a unified creep-ageing constitutive model to multistep heat treatment of aluminium alloys. Mater Des, 2017, 122: 422-432.

[13] Lin JG, Ho KC, Dean TA. An integrated process for modelling of precipitation hardening and springback in creep age-forming. Int J Mach Tool Manuf, 2006, 46(11): 1266-1270.

[14] Ho KC, Lin JG, Dean TA. Modelling of springback in creep forming thick aluminum sheets. Int J Plast, 2004, 20(4): 733-751.

[15] Lin YC, Zhang JL, Liu G, et al. Effects of pre-treatments on aging precipitates and corrosion resistance of a creep-aged Al-Zn-Mg-Cu alloy. Mater Des, 2015, 83: 866-875.

[16] Lei C, Li H, Fu J, et al. Non-isothermal creep aging behaviors of an Al-Zn-Mg-Cu alloy. Mater Charact, 2018, 144: 431-439.

[17] Lei C, Yang H, Li H, et al. Dependences of microstructures and properties on initial tempers of creep aged 7050 aluminum alloy. J Mater Process Technol, 2017, 239: 125-132.

[18] Li Y, Shi Z, Lin J, et al. Experimental investigation of tension and compressive creep-ageing behaviour of AA2050 with different initial tempers. Mater Sci Eng A, 2016, 657: 299-308.

[19] Lei C, Li H, Zheng GW, et al. Thermal-mechanical loading sequences related creep aging behaviors of 7050 aluminum alloy. J Alloy Compd, 2017, 731: 90-99.

[20] Fu J, Li H, Lei C, et al. Role of thermal- mechanical loading sequence on creep aging behaviors of 5A90 Al-Li alloy. J Mater Process Technol, 2018, 255: 354-363.

[21] Chen JF, Jiang JT, Zhen L, et al. Stress relaxation behavior of an Al-Zn-Mg-Cu alloy in simulated age-forming process. J Mater Process Technol, 2014, 214(4): 775-783.

[22] Hu LB, Zhan LH, Liu ZL, et al. The effects of pre-deformation on the creep aging behavior and mechanical properties of Al-Li-S4 alloys. Mater Sci Eng A, 2017, 703: 496-502.

[23] Xu YQ, Zhan LH, Li WK. Effect of pre-strain on creep aging behavior of 2524 aluminum alloy. J Alloy Compd, 2017, 691: 564-571.

[24] Wang D, Ni DR, Ma ZY. Effect of pre-strain and two-step aging on microstructure and stress corrosion cracking of 7050 alloy. Mater Sci Eng A, 2008, 494(1–2): 360-366.

[25] Berg LK, Gjønnes J, Hansen V, et al. GP-zones in Al-Zn-Mg alloys and their role in artificial aging. Acta Mater, 2001, 49(17): 3443-3451.

[26] Sha G, Cerezo A. Early-stage precipitation in Al-Zn-Mg-Cu alloy (7050). Acta Mater, 2004, 52(15): 4503-4516.

[27] Ying XR, Du YX, Song M, et al. Direct measurement of precipitate induced strain in an Al-Zn-Mg-Cu alloy with aberration corrected transmission electron microscopy. Micron, 2016, 90: 18-22.

[28] Tsumuraya K, Miyata Y. Coarsening models incorporating both diffusion geometry and volume fraction of particles. Acta Metall, 1983, 31(3): 437-452.

[29] Lin YC, Jiang YQ, Zhang XC, et al. Effect of creep-aging processing on corrosion resistance of an Al-Zn-Mg-Cu alloy. Mater Des, 2014, 61(9): 228-238.

[30] Pešička J, Kužel R, Dronhofer A, et al. The evolution of dislocation density during heat treatment and creep of tempered martensite ferritic steels. Acta Mater, 2003, 51(16): 4847-4862.

[31] Williamson GK, Hall WH. X-ray line broadening from filed aluminium and wolfram. Acta Mater, 1953, 1(1): 22-31.

[32] Chen YZ, Barth HP, Deutges M, et al. Increase in dislocation density in cold-deformed Pd using H as a temporary alloying addition. Scr Mater, 2013, 68(9): 743-746.

[33] Ungar T. Microstructural parameters from X-ray diffraction peak broadening. Scr Mater, 2004, 51(8): 777-781.

[34] Rai SK, Kumar A, Shankar V, et al. Characterization of microstructures in Inconel 625 using X-ray diffraction peak broadening and lattice parameter measurements. Scr Mater, 2004, 51(1): 59-63.

[35] Rodgers BI, Prangnell PB. Quantification of the influence of increased pre-stretching on microstructure-strength relationships in the Al-Cu-Li alloy AA2195. Acta Mater, 2016, 108: 55-67.

Funding

National Natural Science Foundation of China (CN)(51235010)