Performance analysis of a thick copper-electroplated FDM ABS plastic rapid tool EDM electrode

Abstract

The importance of rapid tooling (RT) and additive manufacturing (AM) appears to be indispensable for boosting the process of manufacturing and expanding the horizon of production technology worldwide. This concept draws the attention of numerous scholars to arrive at a conclusive theory for the widespread utilization of RT. This study attempts to determine the viability and performance of an RT electrode in the field of electro discharge machining (EDM). The electrode prototype is made using an acrylonitrile butadiene styrene (ABS) plastic by fused deposition modeling (FDM), an AM technique, electroplated with copper of desired thickness, and used in die sinking EDM of D2 steel. The scanning electron microscope analysis of the electroplated samples confirms that it is possible to obtain the desired thickness of the metal by electroplating on any electrically conductive surface. In the present work, an experimental study is performed for examining the electroplated copper thickness of the plastic EDM electrode and its performances. It is found that the electroplated ABS plastic EDM RT electrode successfully performs the machining operation of D2 steel, and the results are comparable with a solid electrode. The study reveals that the RT electrode can be regarded as a viable tool for rough cutting or semi-finishing cut EDM functions. The experimental results are thoroughly discussed, examined, analyzed, and evaluated for the purpose of developing the appropriate form of the concept.

Keywords

Additive manufacturing (AM) / Fused deposition modeling (FDM) / Metallization of acrylonitrile butadiene styrene (ABS) plastic / Reduced silver colloidal / Rapid tooling (RT) / Electro discharge machining (EDM)

References

[1.] Rao TB, Krishna AG, Katta RK, et al. Modeling and multi-response optimization of machining performance while turning hardened steel with self propelled rotary tool. Adv Manuf, 2015, 3(1): 84-95.

[2.] Chu WS, Kim CS, Lee HT, et al. Hybrid manufacturing in micro/nano scale: a review. Int J Precis Eng Manuf-Green Technol, 2014, 1(1): 75-92.

[3.] Iakymenko N, AlfnesE Thomassen MK. A differentiated approach for justification of advanced manufacturing technologies. Adv Manuf, 2016, 4(3): 257-267.

[4.] Dimla DE, Hopkinson N, Rothe H. Investigation of complex rapid EDM electrodes for rapid tooling applications. Int J Adv Manuf Technol, 2004, 23(3–4): 249-255.

[5.] Hsu CY, Chen DY, Lai MY, et al. EDM electrode manufacturing using RP combining electroless plating with electroforming. Int J Adv Manuf Technol, 2008, 38(9): 915-924.

[6.] Negi S, Dhiman S, Sharm RK. Basics applications and future of additive manufacturing technologies: a review. J Manuf Technol Res, 2013, 5(1–2): 75-96.

[7.] Monzon M, Benıtez AN, Marreroa MD, et al. Validation of electrical discharge machining electrodes made with rapid tooling technologies. J Mat Proc Technol, 2008, 1196(1–3): 109-114.

[8.] Panda MC, Yadava V. Thermal modelling of material removal rate and surface roughness in die sinking-electro chemical spark machining process. J Mach Form Technol, 2010, 2(1–2): 1-2.

[9.] Pradhan MK, Das R, Biswas CK. Prediction of surface roughness in electrical discharge machining of D2 steel using regression and artificial neural networks modeling. J Mach Form Technol, 2010, 2(1–2): 25-46.

[10.] Gillot F, Mognola P, Furet B. Dimensional accuracy studies of copper shells used for electro-discharge machining electrodes made with rapid prototyping and the electroforming process. J Mater Proc Technol, 2005, 159(1): 33-39.

[11.] Arthur A, Dickens PM (1995) Rapid prototyping of EDM electrodes by stereolithography. In: International symposium on electro machining (ISEM) XI. Lausanne, Switzerland, pp 691–699

[12.] Naruskevicius L, Tamasiunaite LT, Zielieni A, et al. A Co-based surface activator for electroless copper deposition. Surf Coat Technol, 2012, 206(11–12): 2967-2971.

[13.] Fritz N, Koo HC, Wilson Z, et al. Electroless deposition of copper on organic and inorganic substrates using a Sn/Ag catalyst. J Electrochem Soc, 2012, 159(6): D386-D392.

[14.] Wang GX, Li N, Hu HL, et al. Process of direct copper plating on ABS plastics. Appl Surf Sci, 2006, 253(2): 480-484.

[15.] Yen PC. Improved ABS plastic activating treatment for electroless copper plating. Polymer, 1995, 36(17): 3399-3400.

[16.] Bazzaoui M, Martins JI, Bazzaoui EA, et al. A simple method for acrylonitrile butadiene styrene metallization. Surf Coat Technol, 2013, 224(7): 71-76.

[17.] Li D, Goodwin K, Yang CL. Electroless copper deposition on aluminum-seeded ABS plastics. J Mater Sci, 2008, 43(22): 7121-7131.

[18.] Shu Z, Wang X. Environment-friendly Pd free surface activation techniques for ABS surface. Appl Surf Sci, 2012, 258(14): 5328-5331.

[19.] European Commission (2006) Integrated pollution prevention and control reference document on best available techniques for the surface treatment of metals and plastics

[20.] Liu ZC, He Q, Hou P, et al. Electroless plating of copper through successive pretreatment with silane and colloidal silver. Colloids Surf A Physicochem Eng Asp, 2005, 257–258: 283-286.

[21.] Nair KM, Skurski MA, Voultos JD (2013) Nickel-gold plateable thick film silver paste. US Patent 8609256 B2, 17 December 2013

[22.] Ohno L. Electrochemistry of electroless plating. Mater Sci Eng, 1991, 146(1–2): 33-49.

[23.] Gan X, Zhou K, Hu W, et al. Role of additives in electroless copper plating using hypophosphite as reducing agent. Surf Coat Technol, 2012, 206(15): 3405-3409.

[24.] Schlesinger M, Paunovic M. Modern electroplating, 2011, 5 New Jersey: Wiley

[25.] Vaskelis A, Jaciauskiene J, Stalnioniene I, et al. Accelerating effect of ammonia on electroless copper deposition in alkaline formal dehyde-containing solutions. J Electroanal Chem, 2007, 600(1): 6-12.

[26.] Zhu Z, Zhu D, Qu NS. Synthesis of smooth copper deposits by simultaneous electroforming and polishing process. Mater Lett, 2008, 62(8–9): 1283-1286.

[27.] Jilani ST, Pandey PC. Experimental investigations into the performance of water as dielectric in EDM. Int J Mach Tool Design Res, 1984, 24: 31-43.

[28.] Chen SL, Yan BH, Huang FY. Influence of kerosene and distilled water as dielectric on the electric discharge machining characteristics of Ti-6Al-4V. J Mater Proccess Technol, 1999, 87: 107-111.

[29.] Syed KH, Palaniyandi K. Performance of electrical discharge machining using aluminum powder suspended distilled water. Turk J Eng Environ Sci, 2012, 36: 195-207.

[30.] Mathapathi U, Jeevraj S, Kumar S, et al. Analysis of material removal rate with powder mixed dielectric. IJCAE, 2013, 4(3): 316-332.

[31.] Goyal S, Singh RK. Parametric study of powder mixed EDM and optimization of MRR & surface roughness. Int J Sci Eng Technol, 2014, 3(1): 56-62.

[32.] Padhi SK, Das HC, Mahapatra SS. A review on experimental investigations on parametric appraisal in EDM process. J Adv Res Dyn Control Syst, 2017, 13: 594-603.

[33.] Padhi SK, Sahu RK, Mahapatra SS, et al. Optimization of fused deposition modeling process parameters using a fuzzy inference system coupled with Taguchi philosophy. Adv Manuf, 2017, 5: 231-242.