Adaptive pass planning and optimization for robotic welding of complex joints

Abstract

Current industrial robotic welding systems cannot achieve automated solutions for multi-layer multi-pass welding of complex joints due to the presence of non-uniform and irregular welding groove geometries. This paper presents an adaptive pass planning approach for robotic welding of such complex joints. The welding groove is first segmented considering both the variation in groove dimension and the reachability of the robot welding torch. For each welding segment, the welding passes are planned to be in accordance with welding practices, viz., keeping the same number of welding passes in each layer while maintaining consistent welding parameters. An adaptive pass adjustment scheme is developed to address the discrepancies between the simulated results and the actual welding deposition after finishing a few layers of welding. Corresponding robot paths are generated and optimized to ensure minimum joint movement subject to three constraints, viz., reachability, collision-free and singularity avoidance. The proposed approach has been simulated with the arc welding of a Y-type joint found typically in offshore structures.

Keywords

Robotic welding / Multi-pass planning / Pass adjustment / Robot path planning

References

[1] Lorincz J (2015) Robotic welding fills skills gap with quality production. http://www.sme.org/MEMagazine/Article.aspx?id=8589936441. Accessed 26 Oct 2015

[2] Lin W, Luo H. Nee AYC. Robotic welding. Springer handbook of manufacturing engineering and technology: robotics and automation, 2015, London: Springer 2404-2444.

[3] Pires JN, Loureiro A, Bölmsjo G. Welding robots: technology, system issues and application, 2006, London: Springer

[4] Neto P, Mendes N. Direct off-line robot programming via a common CAD package. Robot Auton Syst, 2013, 61(8): 896-910.

[5] Reinhart G, Munzert U, Vogl W. A programming system for robot-based remote-laser-welding with conventional optics. Annals of the CIRP, 2008, 57(1): 37-40.

[6] Fang HC, Ong SK, Nee AYC. Interactive robot trajectory planning and simulation using augmented reality. Robot Comput Integr Manuf, 2012, 28(2): 227-237.

[7] Fang HC, Ong SK, Nee AYC. Novel AR-based interface for human-robot interaction and visualization. Adv Manuf, 2014, 2(4): 275-288.

[8] Yang C, Ye Z, Chen Y, et al. Multi-pass path planning for thick plate by DSAW based on vision sensor. Sensor Rev, 2014, 34(4): 416-423.

[9] Cao Y, Zhu S, Liang X, et al. Overlapping model of beads and curve fitting of bead section for rapid manufacturing by robotic MAG welding process. Robot Comput Integr Manuf, 2011, 27(3): 641-645.

[10] Xiong J, Zhang G, Gao H, et al. Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing. Robot Comput Integr Manuf, 2013, 29(2): 417-423.

[11] Suryakumar S, Karunakaran KP, Bernard A, et al. Weld bead modeling and process optimization in hybrid layered manufacturing. Comput Aided Design, 2011, 43(4): 331-344.

[12] Ganjigatti JP, Pratihar DK, Choudhury R. Global versus cluster-wise regression analyses for prediction of bead geometry in MIG welding process. J Mater Process Tech, 2007, 189: 352-366.

[13] Lee JI, Um KW. Prediction of welding process parameters by prediction of back-bead geometry. J Mater Process Tech, 2000, 108: 106-113.

[14] Kim I, Son J, Park C, et al. A study on prediction of bead height in robotic arc welding using a neural network. J Mater Process Tech, 2002, 130–131: 229-234.

[15] Nagesh DS, Datta GL. Prediction of weld bead geometry and penetration in shielded metal-arc welding using artificial neural networks. J Mater Process Technol, 2002, 123: 303-312.

[16] Yan SJ, Ong SK, Nee AYC (2016) Optimal pass planning for robotic welding of large-dimension joints with deep grooves. In: Proceedings of 9th international conference on digital enterprise technology (det2016)—intelligent manufacturing in the knowledge economy era, 29–31 March 2016, Nanjing, China

[17] Huo L, Baron L. The joint-limits and singularity avoidance in robotic welding. Ind Robot, 2008, 35(5): 456-464.

[18] Huo L, Baron L. The self-adaptation of weights for joint-limits and singularity avoidances of functionally redundant robotic-task. Robot Comput Integr Manuf, 2011, 27(2): 367-376.

[19] Ogbemhe J, Mpofu K. Towards achieving a fully intelligent robotic arc welding: a review. Ind Robot, 2015, 42(5): 475-484.

[20] Fang HC, Ong SK, Nee AYC (2016) Robot path planning optimization for welding complex joints. Int J Adv Manuf Technol. doi: 10.1007/s00170-016-9684-z

[21] Rampaul H. Pipe welding procedure, 2002, 2 New York: Industrial Press

Funding

ASTAR(Project No. 1225100006)