On the wavelet analysis of cutting forces for chatter identification in milling

Abstract

Chatter vibrations in machining operations affect surface finishing and tool behaviour, particularly in the end-milling of aluminum parts for the aerospace industry. This paper presents a methodological approach to identify chatter vibrations during manufacturing processes. It relies on wavelet analyses of cutting force signals during milling operations. The cutting-force signal is first decomposed into an approximation/trend sub-signal and detailed sub-signals, and it is then re-composed using modified sub-signals to reduce measurement noise and strengthen the reference peak forces. The reconstruction of the cutting-force signal is performed using a wavelet denoising procedure based on a hard-thresholding method. Four experimental configurations were set with specific cutting parameters using a workpiece specifically designed to allow experiments with varying depths of cut. The experimental results indicate that resultant force peaks (after applying the threshold to the detailed sub-signals) are related to the presence of chatter, based on the increased correlation of such peaks and the surface roughness profiles, thereby reinforcing the applicability of the proposed method. The results can be used to control the online occurrence of chatter in end-milling processes, as the method does not depend on the knowledge of cutting geometry nor dynamic parameters.

Keywords

Cutting force / End milling / Chatter / Wavelet filter

References

[1] Kurada S, Bradley C. A review of machine vision sensors for tool condition monitoring. Comput Ind, 1997, 34(1): 55-72.

[2] Tlusty J, MacNeil P. Dynamics of cutting forces in end milling. Ann CIRP, 1975, 24: 21-25.

[3] Hanna NH, Tobias SA. Theory of nonlinear regenerative chatter. J Eng Ind Trans ASME, 1974, 96: 247-255.

[4] Altintaş Y, Budak E. Analytical prediction of stability lobes in milling. CIRP Ann Manuf Technol, 1995, 44(1): 357-362.

[5] Budak E, Altintaş Y. Analytical prediction of chatter stability in milling part I: general formulation. J Dyn Syst Meas Control Trans ASME, 1998, 120: 22-30.

[6] Zhu K, Wong YS, Hong GS. Wavelet analysis of sensor signals for tool condition monitoring: a review and some new results. Int J Mach Tools Manuf, 2009, 49(7–8): 537-553.

[7] Cao H, Lei Y, He Z. Chatter identification in end milling process using wavelet packets and Hilbert-Huang transform. Int J Mach Tools Manuf, 2013, 69(3): 11-19.

[8] Fu Y, Zhang Y, Zhou H, et al. Timely online chatter detection in end milling process. Mech Syst Signal Process, 2016, 75: 668-688.

[9] Bort CMG, Leonesio M, Bosetti P. A model-based adaptive controller for chatter mitigation and productivity enhancement in CNC milling machines. Robot Comput Integr Manuf, 2016, 40: 34-43.

[10] Kasashima N, Mori K, Ruiz GH, et al. Online failure detection in face milling using discrete wavelet transform. CIRP Ann Manuf Technol, 1995, 44(1): 483-487.

[11] Suh CS, Khurjekar PP, Yang B. Characterisation and identification of dynamic instability in milling operation. Mech Syst Signal Process, 2002, 16(5): 853-872.

[12] Tangjitsitcharoen S, Saksri T, Ratanakuakangwan S. Advance in chatter detection in ball end milling process by utilizing wavelet transform. J Intell Manuf, 2015, 26(3): 1-15.

[13] Peng C, Wang L, Liao TW. A new method for the prediction of chatter stability lobes based on dynamic cutting force simulation model and support vector machine. J Sound Vib, 2015, 354: 118-131.

[14] Mann BP, Insperger T, Bayly PV, et al. Stability of up-milling and down-milling, part 2: experimental verification. Int J Mach Tools Manuf, 2003, 43(1): 35-40.

[15] Altintaş A, Budak E. Analytical prediction of stability lobes in milling. CIRP Ann Manuf Technol, 1995, 44(1): 357-362.

[16] Altintaş Y. Manufacturing automation: metal cutting mechanics, machine tool vibrations, and CNC design, 2000, Cambridge: Cambridge University Press

[17] Addison PS. The illustrated wavelet transform handbook, 2002, Cambridge: Taylor and Francis.

[18] Walker JS. Wavelets and their scientific applications, 1999, Cambridge: Chapman & Hall/CRC.

[19] Cabrera CGA (2015) Chatter identification on end milling forces using wavelet analysis. Dissertation, Universidade Federal do Rio de Janeiro