Research on automatic high velocity arc spraying technique and metastable coating materials

Abstract

Into the 21st century, remanufacturing engineering has been accepted by more and more people in China. Remanufacturing is an industrial maintenance technology for worn or waste electro-mechanical products using advanced technology, which means the high-level stage for the maintenance and surface engineering. In this paper, a new automotive high velocity arc spraying system was introduced. And three kinds of advanced amorphous and nanocrystalline metastable coatings were developed, including Fe, Ni and Al-based amorphous and nanocrystalline composite coatings. Their research development and applications were introduced. And the development trends of high velocity arc spraying system and advanced metastable surface protective coating materials on the remanufacturing engineering were indicated.

Keywords

Remanufacturing / Arc spraying / Amorphous / Nanocrystalline / Coating

References

[1] Xu BS, Liu SC, Zhu ZX. Foundations and applications of remanufacturing engineering, 2005, Haerbin: Harbin Institute of Technology Press

[2] Chen YX, Xu BS, Xu Y, et al. Progress in applying HVAS technology to maintenance and remanufacturing engineering. China Surf Eng, 2006, 19(S1): 169-173.

[3] Liang XB, Chen YX, Bai JY, et al. An automatic high velocity arc spraying technology applied to remanufacture engine crankshaft. China Surf Eng, 2010, 23(2): 112-116.

[4] Liang XB, Xu BS, Ma SN. Measurement and analyses of high velocity arc spraying technique characteristics. Chin J Mech Eng, 2002, 38(2): 57-60.

[5] Xu BS. The remanufacturing engineering and automatic surface engineering technology. Key Eng Mater, 2008, 373(374): 1-10.

[6] Liang XB, Xu BS, Wei SC, et al. Research progress in thermal spraying metastable composite coating. Mater Rev, 2009, 5: 1-4.

[7] Cheng JB, Liang XB, Xu BS, et al. Characterization of mechanical properties of FeCrBSiMnNbY metallic glass coatings. J Mater Sci, 2009, 44(13): 3353-3363.

[8] Liang XB, Cheng JB, Bai JY, et al. Microstructure and erosion properties of Fe-based amorphous and nanocrystalline coatings. Trans China Weld Inst, 2009, 30(2): 61-64.

[9] Liang XB, Zhang ZB, Chen YX, et al. Study on Al-based amorphous and nanocrystalline composite coating. Acta Metall Sinca, 2012, 48(3): 289-297.