Usages of metaheuristic algorithms in investigating civil infrastructure optimization models; a review

Abstract

Optimization is the process of creating the best possible outcome while taking into consideration the given conditions. The ultimate goal of optimization is to maximize or minimize the desired effects to meet the technological and management requirements. When faced with a problem that has several possible solutions, an optimization technique is used to identify the best one. This involves checking different search domains at the right time, depending on the specific problem. To solve these optimization problems, nature-inspired algorithms are used as part of stochastic methods. In civil engineering, numerous design optimization problems are nonlinear and can be difficult to solve via traditional techniques. In such points, metaheuristic algorithms can be a more useful and practical option for civil engineering usages. These algorithms combine randomness and decisive paths to compare multiple solutions and select the most satisfactory one. This article briefly presents and discusses the application and efficiency of various metaheuristic algorithms in civil engineering topics.

References

AbubakarJ, BenedictA, IarenC. Design optimization of rectangular Rc beams using genetic algorithm. Usak University Journal of Engineering Sciences, 2021, 4(2): 66-78

AchtzigerW. On simultaneous optimization of truss geometry and topology. Structural and Multidisciplinary Optimization, 2007, 33(4–5): 285-304

AdeliH, KumarS. Distributed genetic algorithm for structural optimization. Journal of Aerospace Engineering, 1995, 8(3): 156-163

AkbarpourA, ZeynaliMJ, Nazeri TahroudiM. Locating optimal position of pumping wells in aquifer using meta-heuristic algorithms and finite element method. Water Resources Management, 2020, 34: 21-34

Akin, A., & Saka, M. (2010). Optimum Detailed Design of Reinforced Concrete Continuous Beams Using the Harmony Search Algorithm.

Al-ShukurA-HK, Al-RammahiAMA. Optimum design of semi-gravity retaining wall subjected to static and seismic loads. Journal of Civil Engineering and Technology, 2017, 8(1): 873-881

BarkhordariMS, FengD-C, TehranizadehM. Efficiency of hybrid algorithms for estimating the shear strength of deep reinforced concrete beams. Periodica Polytechnica Civil Engineering, 2022, 66(2): 398-410

BashaBM, BabuGS. Target reliability based design optimization of anchored cantilever sheet pile walls. Canadian Geotechnical Journal, 2008, 45(4): 535-548

BekdaşG, NigdeliSM, YangX-S. Sizing optimization of truss structures using flower pollination algorithm. Applied Soft Computing, 2015, 37: 322-331

BhavyaR, ElangoL. Ant-inspired metaheuristic algorithms for combinatorial optimization problems in water resources management. Water, 2023, 15(9): 1712

Borges, A. d. Á. (2013). Otimização De Forma E Paramétrica De Estruturas Treliçadas Através Dos Métodos Meta-Heurísticos Harmony Search E Firefly Algorithm.

BoumezeraneD. recent tendencies in the use of optimization techniques in geotechnics: a review. Geotechnics, 2022, 2(1): 114-132

CampCV, AkinA. Design of retaining walls using big bang-big crunch optimization. Journal of Structural Engineering, 2012, 138(3): 438-448

CampCV, BichonBJ, StovallSP. Design of steel frames using ant colony optimization. Journal of Structural Engineering, 2005, 131(3): 369-379

CampCV, HuqF. Co2 and cost optimization of reinforced concrete frames using a big bang-big crunch algorithm. Engineering Structures, 2013, 48: 363-372

ChakrobortyP, DebK, SubrahmanyamP. Optimal scheduling of urban transit systems using genetic algorithms. Journal of Transportation Engineering, 1995, 121(6): 544-553

ChangF-S, WuJ-S, LeeC-N, ShenH-C. Greedy-search-based multi-objective genetic algorithm for emergency logistics scheduling. Expert Systems with Applications, 2014, 41(6): 2947-2956

ChengYM. Global optimization analysis of slope stability by simulated annealing with dynamic bounds and dirac function. Engineering Optimization, 2007, 39(1): 17-32

ChengYM, LiL, ChiS. Performance studies on six heuristic global optimization methods in the location of critical slip surface. Computers and Geotechnics, 2007, 34(6): 462-484

ChengYM, LiL, LansivaaraT, ChiS, SunY. An improved harmony search minimization algorithm using different slip surface generation methods for slope stability analysis. Engineering Optimization, 2008, 40(2): 95-115

CostaAL, da CunhaMC, CoelhoPA, EinsteinHH. Solving high-speed rail planning with the simulated annealing algorithm. Journal of Transportation Engineering, 2013, 139(6): 635-642

DastanM, GoodarzimehrV, ShojaeeS, Hamzehei-JavaranS, TalatahariS. Optimal design of planar steel frames using the hybrid teaching-learning and charged system search algorithm. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2023, 47(6): 3357-3373

DiasJC, MachadoP, SilvaDC, AbreuPH. An inverted ant colony optimization approach to traffic. Engineering Applications of Artificial Intelligence, 2014, 36: 122-133

DingY, ZhuY, FengJ, ZhangP, ChengZ. Interpretable spatio-temporal attention Lstm model for flood forecasting. Neurocomputing, 2020, 403: 348-359

DouS, JensenJS. Optimization of hardening/softening behavior of plane frame structures using nonlinear normal modes. Computers & Structures, 2016, 164: 63-74

Fatehi-NobarianB, NouraniV, NgA. Application of meta-heuristic methods in the optimization of geometrical sections in trapezoidal channels in jump energy loss. AQUA - Water Infrastructure, Ecosystems and Society, 2023, 72(8): 1539-1552

FedghoucheF, TiliouineB. Minimum cost design of reinforced concrete T-beams at ultimate loads using eurocode2. Engineering Structures, 2012, 42: 43-50

GandomiAH, KashaniAR, MousaviM, JalalvandiM. Slope stability analyzing using recent swarm intelligence techniques. International Journal for Numerical and Analytical Methods in Geomechanics, 2015, 39(3): 295-309

GandomiAH, YangX-S, AlaviAH. Cuckoo search algorithm: a metaheuristic approach to solve structural optimization problems. Engineering with Computers, 2013, 29: 17-35

GaoW. Determination of the noncircular critical slip surface in slope stability analysis by meeting ant colony optimization. Journal of Computing in Civil Engineering, 2016, 30(2): 06015001

GeemZW. Multiobjective optimization of time-cost trade-off using harmony search. Journal of Construction Engineering and Management, 2010, 136(6): 711-716

GeemZW, KimJH, LoganathanG. Harmony search optimization: application to pipe network design. International Journal of Modelling and Simulation, 2002, 22(2): 125-133

GhannadiaslA, GhaemifardS. Crack detection of the cantilever beam using new triple hybrid algorithms based on particle swarm optimization. Frontiers of Structural and Civil Engineering, 2022, 16(9): 1127-1140

GhannadiaslA, GhaemifardS. Meta-heuristic algorithms: an appropriate approach in crack detection. Innovative Infrastructure Solutions, 2024, 9(7): 263

Ghazavi, M., & Salavati, V. (2011). Sensitivity Analysis and Design of Reinforced Concrete Cantilever Retaining Walls Using Bacterial Foraging Optimization Algorithm. Paper presented at the 3rd International Symposium on Geotechnical Safety and Risk (ISGSR).

GholizadehS, DaneshM, GheyratmandC. A new newton metaheuristic algorithm for discrete performance-based design optimization of steel moment frames. Computers & Structures, 2020, 234: 106250

GovindarajV, RamasamyJ. Optimum detailed design of reinforced concrete continuous beams using genetic algorithms. Computers & Structures, 2005, 84(1–2): 34-48

GrecoA, PluchinoA, CannizzaroF. An improved ant colony optimization algorithm and its applications to limit analysis of frame structures. Engineering Optimization, 2019, 51(11): 1867-1883

HaddadOB, TabariMMR, Fallah-MehdipourE, MariñoM. Groundwater model calibration by meta-heuristic algorithms. Water Resources Management, 2013, 27: 2515-2529

HadjilooE, KnutzS, GrabeJ. Towards the saving potentials using a hybrid topology optimization: application of a coupled deterministic and empirical approach solving a geotechnical optimization problem. International Journal for Numerical Methods in Engineering, 2024, 125(6): e7410

HasançebiO, Kazemzadeh AzadS. discrete size optimization of steel trusses using a refined big bang-big crunch algorithm. Engineering Optimization, 2014, 46(1): 61-83

KavehA. Applications of metaheuristic optimization algorithms in civil engineering, 2017Springer

KavehA, AbadiSMA. Harmony search based algorithms for the optimum cost design of reinforced concrete cantilever retaining walls. International Journal of Civil Engineering, 2011, 9(1): 1-8

Kaveh, A., Hamedani, K. B., Hosseini, S. M., & Bakhshpoori, T. (2020). Optimal Design of Planar Steel Frame Structures Utilizing Meta-Heuristic Optimization Algorithms. Paper presented at the Structures.

Kaveh, A., Kamalinejad, M., & Hamedani, K. B. (2021). Enhanced versions of the shuffled shepherd optimization algorithm for the optimal design of skeletal structures. Paper presented at the Structures.

KavehA, Kalateh-AhaniM, Fahimi-FarzamM. Constructability optimal design of reinforced concrete retaining walls using a multi-objective genetic algorithm. Structural Engineering and Mechanics, 2013, 47(2): 227-245

KavehA, MottaghiL, IzadifardR. Optimal design of a non-prismatic reinforced concrete box girder bridge with three meta-heuristic algorithms. Scientia Iranica, 2022, 29(3): 1154-1167

Kaveh, A., & Sabzi, O. (2011). A comparative study of two meta-heuristic algorithms for optimum design of reinforced concrete frames.

Kaveh, A., & Shakouri, M. A. A. (2011). Harmony search based algorithms for the optimum cost design of reinforced concrete cantilever retaining walls.

KavehA, TalatahariS. Size optimization of space trusses using big bang-big crunch algorithm. Computers & Structures, 2009, 87(17–18): 1129-1140

Kaveh, A., & Talatahari, S. (2010). A discrete big bang-big crunchalgorithm for optimaldesign of skeletal structures.

KavehA, ZaerrezaA. Optimum design of the frame structures using the force method and three recently improved metaheuristic algorithms. International Journal of Optimization in Civil Engineering, 2023, 13(3): 309-325

KayabekirAE, BekdaşG, NigdeliSM. Optimum design of reinforced concrete t-beam considering environmental factors via flower pollination algorithm. International Journal of Engineering and Applied Sciences, 2021, 13(4): 166-178

KhodadadiN, ÇiftçioğluAÖ, MirjaliliS, NanniA. A Comparison Performance Analysis of Eight Meta-Heuristic Algorithms for Optimal Design of Truss Structures with Static Constraints. Decision Analytics Journal, 2023, 8

KocieckiM, AdeliH. Two-phase genetic algorithm for topology optimization of free-form steel space-frame roof structures with complex curvatures. Engineering Applications of Artificial Intelligence, 2014, 32: 218-227

KuanS, OngH, NgKM. Solving the feeder bus network design problem by genetic algorithms and ant colony optimization. Advances in Engineering Software, 2006, 37(6): 351-359

LeeC, AhnJ. Flexural design of reinforced concrete frames by genetic algorithm. Journal of Structural Engineering, 2003, 129(6): 762-774

LeungYF, KlarA, SogaK. Theoretical study on pile length optimization of pile groups and piled rafts. Journal of Geotechnical and Geoenvironmental Engineering, 2010, 136(2): 319-330

LiuW, YeJ. Collapse optimization for domes under earthquake using a genetic simulated annealing algorithm. Journal of Constructional Steel Research, 2014, 97: 59-68

Lohar, G., Sharma, S., Saha, A. K., & Ghosh, S. (2021). Optimization of Geotechnical Parameters Used in Slope Stability Analysis by Metaheuristic Algorithms. Paper presented at the Applications of Internet of Things: Proceedings of ICCCIOT 2020.

LundJR, FerreiraI. Operating rule optimization for missouri river reservoir system. Journal of Water Resources Planning and Management, 1996, 122(4): 287-295

MaiHT, LieuQX, KangJ, LeeJ. A novel deep unsupervised learning-based framework for optimization of truss structures. Engineering with Computers, 2023, 39(4): 2585-2608

MaierHR, SimpsonAR, ZecchinAC, FoongWK, PhangKY, SeahHY, TanCL. Ant colony optimization for design of water distribution systems. Journal of Water Resources Planning and Management, 2003, 129(3): 200-209

MartínezFJ, González-VidosaF, HospitalerA, AlcaláJ. Design of tall bridge piers by ant colony optimization. Engineering Structures, 2011, 33(8): 2320-2329

MartínezFJ, González-VidosaF, HospitalerA, YepesV. Heuristic optimization of Rc bridge piers with rectangular hollow sections. Computers & Structures, 2010, 88(5–6): 375-386

Martinez-MartinFJ, Gonzalez-VidosaF, HospitalerA, YepesV. Multi-objective optimization design of bridge piers with hybrid heuristic algorithms. Journal of Zhejiang University SCIENCE A, 2012, 13(6): 420-432

MiddletonRS, BrandtAR. Using infrastructure optimization to reduce greenhouse gas emissions from oil sands extraction and processing. Environmental Science & Technology, 2013, 47(3): 1735-1744

MiguelLFF, LopezRH, MiguelLFF. Multimodal size, shape, and topology optimisation of truss structures using the firefly algorithm. Advances in Engineering Software, 2013, 56: 23-37

MontalvoI, IzquierdoJ, Pérez-GarcíaR, HerreraM. Water distribution system computer-aided design by agent swarm optimization. Computer-Aided Civil and Infrastructure Engineering, 2014, 29(6): 433-448

MugishaS. Infrastructure optimization and performance monitoring: empirical findings from the water sector in Uganda. African Journal of Business Management, 2008, 2(1): 13

Nagaraju, T. V., Sireesha, M., Sunil, B. M., & Alisha, S. S. (2024, 2024//). A Review on Application of Soft Computing Techniques in Geotechnical Engineering. Paper presented at the Proceedings of The 5th International Conference on Advances in Civil and Ecological Engineering Research, Singapore.

OmidinasabF, GoodarzimehrV. A hybrid particle swarm optimization and genetic algorithm for truss structures with discrete variables. Journal of Applied and Computational Mechanics, 2020, 6(3): 593-604

PayaI, YepesV, González-VidosaF, HospitalerA. Multiobjective optimization of concrete frames by simulated annealing. Computer-Aided Civil and Infrastructure Engineering, 2008, 23(8): 596-610

Paya-ZafortezaI, YepesV, HospitalerA, Gonzalez-VidosaF. Co2-Optimization of reinforced concrete frames by simulated annealing. Engineering Structures, 2009, 31(7): 1501-1508

PerezRE, BehdinanK. Particle swarm optimization in structural design swarm intelligence: focus on ant and particle swarm optimization, 2007InTech

PezeshkS, CampC, ChenD. Design of nonlinear framed structures using genetic optimization. Journal of Structural Engineering, 2000, 126(3): 382-388

PrayogoD, ChengM-Y, WuY-W, RediAP, YuVF, PersadaSF, NadlifatinR. A novel hybrid metaheuristic algorithm for optimization of construction management site layout planning. Algorithms, 2020, 13(5): 117

PuthaR, QuadrifoglioL, ZechmanE. Comparing ant colony optimization and genetic algorithm approaches for solving traffic signal coordination under oversaturation conditions. Computer-Aided Civil and Infrastructure Engineering, 2012, 27(1): 14-28

RajeevS, KrishnamoorthyC. Discrete optimization of structures using genetic algorithms. Journal of Structural Engineering, 1992, 118(5): 1233-1250

RajeevS, KrishnamoorthyC. Genetic algorithm-based methodology for design optimization of reinforced concrete frames. Computer-Aided Civil and Infrastructure Engineering, 1998, 13(1): 63-74

ReedM, YiannakouA, EveringR. An ant colony algorithm for the multi-compartment vehicle routing problem. Applied Soft Computing, 2014, 15: 169-176

RenkavieskiC, ParpinelliRS. Meta-heuristic algorithms to truss optimization: literature mapping and application. Expert Systems with Applications, 2021, 182: 115197

SaadL, AissaniA, ChateauneufA, RaphaelW. Reliability-based optimization of direct and indirect Lcc of Rc bridge elements under coupled fatigue-corrosion deterioration processes. Engineering Failure Analysis, 2016, 59: 570-587

SarıbaşA, ErbaturF. Optimization and sensitivity of retaining structures. Journal of Geotechnical Engineering, 1996, 122(8): 649-656

SgambiL, GkoumasK, BontempiF. Genetic algorithms for the dependability assurance in the design of a long-span suspension bridge. Computer-Aided Civil and Infrastructure Engineering, 2012, 27(9): 655-675

ShirgirS, Farahmand-TabarS, AghabeigiP. Optimum design of real-size reinforced concrete bridge via charged system search algorithm trained by nelder-mead simplex. Expert Systems with Applications, 2024, 238: 121815

StolpeM. Truss optimization with discrete design variables: a critical review. Structural and Multidisciplinary Optimization, 2016, 53: 349-374

TalatahariS, GandomiAH, YangX-S, DebS. Optimum design of frame structures using the eagle strategy with differential evolution. Engineering Structures, 2015, 91: 16-25

TalatahariS, KavehA. Improved bat algorithm for optimum design of large-scale truss structures. International Journal of Optimization in Civil Engineering, 2015, 5(2): 241-254

TalatahariS, SheikholeslamiR, ShadfaranM, PourbabaM. Optimum design of gravity retaining walls using charged system search algorithm. Mathematical Problems in Engineering, 2012

TemurR, BekdaşG. Teaching learning-based optimization for design of cantilever retaining walls. Structural Engineering and Mechanics, 2016, 57(4): 763-783

TemürR, TürkanYS, TokluYC. YangX-S. Geometrically nonlinear analysis of trusses using particle swarm optimization. Recent advances in swarm intelligence and evolutionary computation, 2015Springer International Publishing283-300

ToğanV, DaloğluAT. An improved genetic algorithm with initial population strategy and self-adaptive member grouping. Computers & Structures, 2008, 86(11–12): 1204-1218

TokluYC, BekdaşG, TemurR. Analysis of trusses by total potential optimization method coupled with harmony search. Structural Engineering and Mechanics, 2013, 45(2): 183-199

WalravenE, SpaanMT, BakkerB. Traffic flow optimization: a reinforcement learning approach. Engineering Applications of Artificial Intelligence, 2016, 52: 203-212

Wiering, M., Vreeken, J., Van Veenen, J., & Koopman, A. (2004). Simulation and Optimization of Traffic in a City. Paper presented at the IEEE Intelligent Vehicles Symposium, 2004.

XiaoliY. Seismic passive pressures of earth structures by nonlinear optimization. Archive of Applied Mechanics, 2011, 81(9): 1195-1202

XiongY, KuangY. Applying an ant colony optimization algorithm-based multiobjective approach for time-cost trade-off. Journal of Construction Engineering and Management, 2008, 134(2): 153-156

YangI-T. Using elitist particle swarm optimization to facilitate bicriterion time-cost trade-off analysis. Journal of Construction Engineering and Management, 2007, 133(7): 498-505

YangL, LiK, GaoZ, LiX. Optimizing trains movement on a railway network. Omega, 2012, 40(5): 619-633

YuD, TianX, XingX, GaoS. Signal timing optimization based on fuzzy compromise programming for isolated signalized intersection. Mathematical Problems in Engineering, 2016

YücelM, NigdeliSM, KayabekirAE, BekdaşG. CarbasS, ToktasA, UstunD. Optimization and artificial neural network models for reinforced concrete members. Nature-inspired metaheuristic algorithms for engineering optimization applications, 2021Springer181-199

ZhangY, Thomas NgS. An ant colony system based decision support system for construction time-cost optimization. Journal of Civil Engineering and Management, 2012, 18(4): 580-589

ZhengDX, NgST, KumaraswamyMM. Applying pareto ranking and niche formation to genetic algorithm-based multiobjective time-cost optimization. Journal of Construction Engineering and Management, 2005, 131(1): 81-91

ZhuW, HuH, HuangZ. Calibrating rail transit assignment models with genetic algorithm and automated fare collection data. Computer-Aided Civil and Infrastructure Engineering, 2014, 29(7): 518-530