High-Performance Broad-Spectrum Photodetector by Suppressing Stray Electrons by Adopting a Hybrid CQD/Organic Architecture

Abstract

Broad-spectrum photodetectors (PDs) are essential for various health monitoring, night vision, and telecommunications applications, but their detectivity in a wide absorbance region is limited by undesirable electronic response properties. Colloidal quantum dots (CQDs) are a promising system for broad-spectrum detection, whereas their practical potential is hindered by suboptimal dark current characteristics. To overcome these challenges, we propose a layered architecture comprising CQDs and a bulk heterojunction (BHJ) organic film as a hole transport layer. The integration of PbS CQDs offers multiple benefits, including bandgap tuning for minimizing thermal carriers, surface passivation to reduce recombination rates, and the formation of high-quality interfaces with organic layers, which collectively contribute to suppressing dark current leakage and thermal excitations by suppressing stray electrons. By integrating ITIC into the BHJ film, the device detectability is significantly enhanced, reaching 10¹³ Jones in the 400–1000 nm spectral range. This improvement is attributed to the higher lowest unoccupied molecular orbital (LUMO) of ITIC molecules, which effectively hinders electron injection. Additionally, J-aggregation-induced molecular stacking and optimized phase separation of BHJ films contribute to the enhanced performance. The integration of diverse materials offers greater flexibility in device design and functionality, enabling the development of more advanced and sophisticated optoelectronic devices. Furthermore, this approach could significantly enhance the theoretical and practical understanding of optoelectronic device engineering, leading to the development of more advanced optoelectronic devices.

Keywords

acceptor molecules / broad-spectrum detection / colloidal quantum dot / photodetector / specific detectivity

References

[1] Z. Zhao, C. Xu, L. Niu, X. Zhang, and F. Zhang, “Recent Progress on Broadband Organic Photodetectors and their Applications,” Laser & Photonics Review 14 (2020): 2000262.

[2] Y. Chen, W. Ma, C. Tan, et al., “Broadband Bi 2 O 2 Se Photodetectors From Infrared to Terahertz,” Advanced Functional Materials 31 (2021): 2009554.

[3] S. Du, W. Lu, A. Ali, et al., “A Broadband Fluorographene Photodetector,” Advanced Materials 29 (2017): 1700463.

[4] Y. Han, S. Jiao, J. Jing, et al., “Vertical Heterojunction Photodetector With Self-Powered Broadband Response and High Performance,” Chemical Engineering Journal 477 (2023): 147060.

[5] W. Xu, Y. Gao, K. Qian, et al., “A Visible to Near-Infrared Nanocrystalline Organic Photodetector with Ultrafast Photoresponse,” Journal of Materials Chemistry C 10 (2022): 9391.

[6] Z. Zhong, L. Bu, P. Zhu, et al., “Dark Current Reduction Strategy via a Layer-by-Layer Solution Process for a High-Performance All-Polymer Photodetector,” ACS Applied Materials & Interfaces 11 (2019): 8350.

[7] D. Yang and D. Ma, “Development of Organic Semiconductor Photodetectors: From Mechanism to Applications,” Advanced Optical Materials 7 (2019): 1800522.

[8] J. Qi, W. Qiao, and Z. Y. Wang, “Advances in Organic Near-Infrared Materials and Emerging Applications,” Chemical Record 16 (2016): 1531.

[9] Y. Wang, M. Yang, B. Yin, et al., “An A-D-A′-D-A-Type Narrow Bandgap Electron Acceptor Based on Selenophene-Flanked Diketopyrrolopyrrole for Sensitive Near-Infrared Photodetection,” ACS Applied Materials & Interfaces (2024): acsami.3c15365, https://doi.org/10.1021/acsami.3c15365.

[10] H. Feng, B. Yin, L. Pan, et al., “An Electron Acceptor With an Intrinsic Quinoidal Core for Bulk-heterojunction Organic Solar Cells and Photodetectors,” Chemical Communications 59 (2023): 9529.

[11] M. Yang, B. Yin, G. Hu, et al., “Sensitive Short-Wavelength Infrared Photodetection With a Quinoidal Ultralow Band-Gap n-Type Organic Semiconductor,” Chem 10 (2024): 1425.

[12] Y. Zhao, T. Liu, B. Wu, et al., “High-Performance all-Polymer Solar Cells and Photodetectors Enabled by a High-Mobility n-Type Polymer and Optimized Bulk-Heterojunction Morphology,” Chemistry of Materials 33 (2021): 3746.

[13] T. Kim, Y. Firdaus, A. R. Kirmani, et al., “Hybrid Tandem Quantum Dot/Organic Solar Cells With Enhanced Photocurrent and Efficiency via Ink and Interlayer Engineering,” ACS Energy Lettersers 3 (2018): 1307.

[14] J. Huang, H. M. Luong, J. Lee, et al., “Green-Solvent-Processed High-Performance Broadband Organic Photodetectors,” ACS Applied Materials & Interfaces 15 (2023): 37748.

[15] W. Xu, Y. Guo, X. Zhang, et al., “Room-Temperature-Operated Ultrasensitive Broadband Photodetectors by Perovskite Incorporated With Conjugated Polymer and Single-Wall Carbon Nanotubes,” Advanced Functional Materials 28 (2018): 1705541.

[16] J. Liu, Z. Zhou, Y. Gao, et al., “Polymer Synergy for Efficient Hole Transport in Solar Cells and Photodetectors,” Energy & Environmental Science 16 (2023): 4474.

[17] J. Wu, Y. Gao, Z. Zhou, et al., “Constructing High-Performance Solar Cells and Photodetectors With a Doping-Free Polythiophene Hole Transport Material,” Advanced Functional Materials 34 (2024): 2308584.

[18] W. U. Huynh, J. J. Dittmer, and A. P. Alivisatos, “Hybrid Nanorod-Polymer Solar Cells,” Science 295 (2002): 2425.

[19] B. Kim, S.-W. Baek, C. Kim, J. Kim, and J.-Y. Lee, “Mediating Colloidal Quantum Dot/Organic Semiconductor Interfaces for Efficient Hybrid Solar Cells,” Advanced Energy Materials 12 (2022): 2102689.

[20] H. I. Kim, S.-W. Baek, H. J. Cheon, et al., “A Tuned Alternating D-A Copolymer Hole-Transport Layer Enables Colloidal Quantum Dot Solar Cells With Superior Fill Factor and Efficiency,” Advanced Materials 32 (2020): 2004985.

[21] J. D. Zimmerman, V. V. Diev, K. Hanson, et al., “Porphyrin-Tape/C 60 Organic Photodetectors With 6.5% External Quantum Efficiency in the Near Infrared,” Advanced Materials 22 (2010): 2780.

[22] P. Jacoutot, A. D. Scaccabarozzi, T. Zhang, et al., “Infrared Organic Photodetectors Employing Ultralow Bandgap Polymer and Non-Fullerene Acceptors for Biometric Monitoring,” Small 18 (2022): 2200580.

[23] F. Li, Y. Liu, G. Shi, et al., “Matrix Manipulation of Directly-Synthesized PbS Quantum Dot Inks Enabled by Coordination Engineering,” Advanced Functional Materials 31 (2021): 2104457.

[24] B. Yin, X. Zhou, Y. Li, et al., “Sensitive Organic Photodetectors with Spectral Response up to 1.3 µm Using a Quinoidal Molecular Semiconductor,” Advanced Materials 36 (2024): 2310811.

[25] N. Tokmoldin, B. Sun, F. Moruzzi, et al., “Elucidating How Low Energy Offset Matters to Performance of Nonfullerene Acceptor-Based Solar Cells,” ACS Energy Letters 8 (2023): 2552.

[26] J. S. Müller, M. Comí, F. Eisner, et al., “Charge-Transfer State Dissociation Efficiency Can Limit Free Charge Generation in Low-Offset Organic Solar Cells,” ACS Energy Letters 8 (2023): 3387.

[27] S.-W. Baek, S. Jun, B. Kim, et al., “Efficient Hybrid Colloidal Quantum Dot/Organic Solar Cells Mediated by near-infrared Sensitizing Small Molecules,” Nature Energy 4 (2019): 969.

[28] K. Yang, W. Huang, C. Chen, W. Tan, J. Peng, and J. Tian, “The Effects of PbS Quantum Dot Surface Contributing to Their Properties,” Chemical Engineering Journal 500 (2024): 157081.

[29] Y. Cao, A. Stavrinadis, T. Lasanta, D. So, and G. Konstantatos, “The Role of Surface Passivation for Efficient and Photostable PbS Quantum Dot Solar Cells,” Nature Energy 1 (2016): 16035.

[30] T. Yokota, P. Zalar, M. Kaltenbrunner, et al., “Ultraflexible Organic Photonic Skin,” Science Advances 2 (2016): e1501856.

[31] J. Liu, J. Qiao, K. Zhou, et al., “An Aggregation-Suppressed Polymer Blending Strategy Enables High-Performance Organic and Quantum Dot Hybrid Solar Cells,” Small 18 (2022): 2201387.

[32] C. R. Kagan, E. Lifshitz, E. H. Sargent, and D. V. Talapin, “Building Devices from Colloidal Quantum Dots,” Science 353 (2016): aac5523.

[33] L. Hu, Q. Zhao, S. Huang, et al., “Flexible and Efficient Perovskite Quantum Dot Solar Cells via Hybrid Interfacial Architecture,” Nature Communications 12 (2021): 466.

[34] J. Liu, Y. Liu, J. Wang, et al., “Brominated Polythiophene Reduces the Efficiency-Stability-Cost Gap of Organic and Quantum Dot Hybrid Solar Cells,” Advanced Energy Materials 12 (2022): 2201975.

[35] P. Müller-Buschbaum, M. Thelakkat, T. F. Fässler, and M. Stutzmann, “Hybrid Photovoltaics—From Fundamentals Towards Application,” Advanced Energy Materials 7 (2017): 1700248.

[36] Y. Wei, Z. Ren, A. Zhang, et al., “Hybrid Organic/PbS Quantum Dot Bilayer Photodetector with Low Dark Current and High Detectivity,” Advanced Functional Materials 28 (2018): 1706690.

[37] Z. Guo, J. Zhang, X. Liu, L. Wang, L. Xiong, and J. Huang, “Optoelectronic Synapses and Photodetectors Based on Organic Semiconductor/Halide Perovskite Heterojunctions: Materials, Devices, and Applications,” Advanced Functional Materials 33 (2023): 2305508.

[38] I. López-Fernández, D. Valli, C.-Y. Wang, et al., “Lead-Free Halide Perovskite Materials and Optoelectronic Devices: Progress and Prospective,” Advanced Functional Materials 34 (2024): 2307896.

[39] J. Hong, B. Hou, J. Lim, et al., “Enhanced Charge Carrier Transport Properties in Colloidal Quantum Dot Solar Cells via Organic and Inorganic Hybrid Surface Passivation,” Journal of Materials Chemistry A 4 (2016): 18769.

[40] Y. Wang, Z. Liu, N. Huo, et al., “Room-temperature Direct Synthesis of Semi-conductive PbS Nanocrystal Inks for Optoelectronic Applications,” Nature Communications 10 (2019): 5136.

[41] Q. Liu, L. Li, J. Wu, et al., “Organic Photodiodes With Bias-Switchable Photomultiplication and Photovoltaic Modes,” Nature Communications 14 (2023): 6935.

[42] H. Zhao, J. Xue, H. Wu, et al., “High-Performance Green Thick-Film Ternary Organic Solar Cells Enabled by Crystallinity Regulation,” Advanced Functional Materials 33 (2023): 2210534.

[43] R. Sun, P. Lu, D. Zhou, et al., “Samarium-Doped Metal Halide Perovskite Nanocrystals for Single-Component Electroluminescent White Light-Emitting Diodes,” ACS Energy Letters 5 (2020): 2131.

[44] Y. Wang, T. Zhang, D. Samigullina, et al., “Semitransparent Near-Infrared Organic Photodetectors: Flexible, Large-Area, and Physical-Vapor-Deposited for Versatile Advanced Optical Applications,” Advanced Functional Materials 34 (2024): 2313689.

[45] M. Gao, Y. Liu, K. Xian, et al., “Thermally Stable Poly(3-hexylthiophene): Nonfullerene Solar Cells With Efficiency Breaking 10%,” Aggregate 3 (2022): e190.

[46] P. Bi, S. Zhang, J. Ren, et al., “A High-Performance Nonfused Wide-Bandgap Acceptor for Versatile Photovoltaic Applications,” Advanced Materials 34 (2022): 2108090.

RIGHTS & PERMISSIONS

2024 The Author(s). Aggregate published by SCUT, AIEI, and John Wiley & Sons Australia, Ltd.