Technological process optimization for aviation part frame manufacturing on the basis of calculations in the automated warpage computation system

S I Kluchnikov; E A Barakhtenko

doi:10.17816/2074-0530-69677

Izvestiya MGTU MAMI ›› 2010, Vol. 4 ›› Issue (2) : 124 -129. DOI: 10.17816/2074-0530-69677

Articles

other

Technological process optimization for aviation part frame manufacturing on the basis of calculations in the automated warpage computation system

Author information +

History +

PDF

Abstract

The computer-aided warpage computation system is considered in the paper as applied to technological process optimization for manufacturing of aviation parts. The authors give recommendations on technological process optimization for the aviation part frame

Keywords

technological process optimization / aviation part manufacturing / automated warpage computation system / warpage / residual deformations

Cite this article

Download citation ▾

S I Kluchnikov, E A Barakhtenko. Technological process optimization for aviation part frame manufacturing on the basis of calculations in the automated warpage computation system. Izvestiya MGTU MAMI, 2010, 4(2): 124-129 DOI:10.17816/2074-0530-69677

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Ключников. С.И., Барахтенко Е.А. Моделирование напряженного состояния детали после механической обработки // Вестник ИрГТУ. - Иркутск, 2006. - №4. - с. 69-73.

[2]	Журавлев Д.А., Ключников С.И. Функция взаимовлияния для расчета остаточной деформации изгиба маложестких деталей при механообработке // Вестник ИрГТУ. - Иркутск, 1998. - №3. - с. 86-91.