Influence of Occilations in Sectional Shape of Non-rigid Parts Quill Cylinder Type on the Cutting Force in the Process of Combined Machining and Surface Plastic Deformation

Y V Maximov; A V Ankin; E A Vetrova

doi:10.17816/2074-0530-69667

Izvestiya MGTU MAMI ›› 2010, Vol. 4 ›› Issue (1) : 158 -162. DOI: 10.17816/2074-0530-69667

Articles

other

Influence of Occilations in Sectional Shape of Non-rigid Parts Quill Cylinder Type on the Cutting Force in the Process of Combined Machining and Surface Plastic Deformation

Author information +

History +

PDF

Abstract

The crosscutting strength leads to deformation of the part cross-sectional view while being combined machining of non-rigid smooth hollow cylinder parts. But the deformation magnitude is so small that it can be neglected in further calculations.

Keywords

combined machining / cutting depth / sectional shape / non-rigid parts / quill cylinder / deformation / precision

Cite this article

Download citation ▾

Y V Maximov, A V Ankin, E A Vetrova. Influence of Occilations in Sectional Shape of Non-rigid Parts Quill Cylinder Type on the Cutting Force in the Process of Combined Machining and Surface Plastic Deformation. Izvestiya MGTU MAMI, 2010, 4(1): 158-162 DOI:10.17816/2074-0530-69667

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Папшев Д.Д. Отделочно-упрочняющая обработка поверхностным пластическим деформированием.- М.: Машиностроение, 1978. - 152 c.

[2]	Смелянский В.М. и др. Размерно-совмещенное обкатывание детали. - «Станки и инструмент», № 11, 1981, с. 35-36.

[3]	Тимошенко С.П. Теория колебаний в инженерном деле. - ГНТИ, М.-Л., 1931. - 344 c.

[4]	Чистосердов П.С. Управление точностью обработки при совмещении резания и ППД. - «Вестник машиностроения», № 11, 1985, с. 54-57.