Influence of the geometry of plate heat exchanger inlet manifold on the hydraulic unevenness of heat carrier flow

V. I. Merkulov; M. V. Sugonyaev

doi:10.17816/2074-0530-68240

Izvestiya MGTU MAMI ›› 2013, Vol. 7 ›› Issue (2-1) : 144 -146. DOI: 10.17816/2074-0530-68240

Articles

research-article

Influence of the geometry of plate heat exchanger inlet manifold on the hydraulic unevenness of heat carrier flow

Author information +

History +

PDF

Abstract

The article describes the analysis of the influence of different geometry on the hot heat carrier inlet nozzle plate air-to-air heat exchanger on unevenness of flow distribution through the matrix channels. The authors compare the geometry of the existing structure and the most promising design solutions.

Keywords

geometry of inlet pipe / plate air-to-air heat exchangers / unevenness of flow

Cite this article

Download citation ▾

V. I. Merkulov, M. V. Sugonyaev. Influence of the geometry of plate heat exchanger inlet manifold on the hydraulic unevenness of heat carrier flow. Izvestiya MGTU MAMI, 2013, 7(2-1): 144-146 DOI:10.17816/2074-0530-68240

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Кейс В.М., Лондон А.Л. Компактные теплообменники. М.: Государственное Энергетическое Издательство, 1962. 158 с.

[2]	Гусенков А.П., Котов П.И. Длительная и неизотермическая малоцикловая прочность элементов конструкций. М.: Машиностроение, 1988. 264 с.

[3]	Хаузен Х. Теплопередача при противопотоке, прямопотоке, и перекрестном токе: Пер. с нем. М.: Энергоиздат, 1981. 384 с., ил.