Algorithm of minimization of tool idle movements during milling of complex surfaces on 3-axis CNC machines

B. B Ponomarev; Van Nam Nguen

doi:10.17816/2074-0530-67699

Izvestiya MGTU MAMI ›› 2014, Vol. 8 ›› Issue (2-2) : 85 -88. DOI: 10.17816/2074-0530-67699

Articles

research-article

Algorithm of minimization of tool idle movements during milling of complex surfaces on 3-axis CNC machines

Author information +

History +

PDF

Abstract

The paper presents one of the methods of nonproductive machine time optimization of tools during milling of parts with complex surfaces on combined machine. In particular, there was described an algorithm to minimize the idle movements of spherocylindrical and conical cutters. Calculations were performed on the test parts with complex surfaces.

Keywords

idle movement / auxiliary movement / spherocylindrical cutter / conical cutter / complicated surface

Cite this article

Download citation ▾

B. B Ponomarev, Van Nam Nguen. Algorithm of minimization of tool idle movements during milling of complex surfaces on 3-axis CNC machines. Izvestiya MGTU MAMI, 2014, 8(2-2): 85-88 DOI:10.17816/2074-0530-67699

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Бердников Л.Н. Работа на фрезерных станках. Л.: Лениздат, 1987. 206 с.

[2]	Голованов Н.Н. Геометрическое моделирование. М.: Физматлит, 2002. 472 с.

[3]	Пономарёв Б.Б., Нгуен Ван Нам. Алгоритм оптимизации вспомогательных перемещений инструментов при фрезеровании сложных поверхностей // Вестник Иркутского Государственного Технического Университета. 2013. №1. С. 33-37.