Influence of modes of diamond grinding on cutting forces during machining of structural ceramics

Abstract

The paper presents experimental dependences of influence of diamond grinding modes on cutting forces during machining of structural ceramics.

Keywords

structural ceramics / modes of diamond grinding / cutting forces / experimental dependences

References

[1] The nature of machining damage in brittle materials /D.B. Marshall, A.G. Evans, B.T. Khuri-Yakub et al. //Proc. Royal Soc. (London). Ser.A - 1983. - V.385, №1789. - P.461-475.

[2] Marsh D.M. Stress concentrations at crystal surfaces and the embrittlement of sodium chloride //Phil.Mag. - 1960. - V.5, №58. - P.1197 - 1199.

[3] Gielisse P.J., Stanislao J. Mechanical methods of ceramic finishing //NBS, 1972 - №348 - spec. publ. - P.5-35.

[4] Indge J.H. Flat precision machining of ceramic materials //Proc. of the Biennial Inf. Machine - Tool conf. - Chicago, 1986. - P.13.1 - 13.16

[5] Томимори Х. Шлифование тонкой керамики // Кикай гидзюцу - 1984 - Т. 32, № 2 - С. 36 - 40.

[6] Ито С. Прецизионное шлифование тонкой керамики // Кикай то когу. - 1983. - Т. 27, №6. - С. 49 - 56.

RIGHTS & PERMISSIONS

Alexeev S.V.