Numerical simulation of the axisymmetric hydrolipoclasy of thin metal sheet, fixed on the contour

V. K Petrov , L. G Sukhomlinov

Izvestiya MGTU MAMI ›› 2014, Vol. 4 ›› Issue (1-4) : 83 -87.

PDF
Izvestiya MGTU MAMI ›› 2014, Vol. 4 ›› Issue (1-4) : 83 -87. DOI: 10.17816/2074-0530-67457
Articles
research-article

Numerical simulation of the axisymmetric hydrolipoclasy of thin metal sheet, fixed on the contour

Author information +
History +
PDF

Abstract

The results of application the axisymmetric rigid-plastic membrane finite element model to the study of forming a thin contour fixed metal plate under hydrostatic pressure are outlined. A comparison with the known numerical solutions and experimental data is provided.

Keywords

axisymmetric rigid-plastic membrane finite element model / metal sheet / hydrolipoclasy / limit forming

Cite this article

Download citation ▾
V. K Petrov, L. G Sukhomlinov. Numerical simulation of the axisymmetric hydrolipoclasy of thin metal sheet, fixed on the contour. Izvestiya MGTU MAMI, 2014, 4(1-4): 83-87 DOI:10.17816/2074-0530-67457

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Сухомлинов Л.Г., Энгельсберг В.К. Конечноэлементная система автоматизированного расчета напряженно-деформированного состояния тонких оболочек в процессах осесимметричного формоизменения под действием жестких штампов // Известия вузов. Машиностроение. 1989. № 3. С. 66-71.

[2]

Sukhomlinov L.G., Engelsberg V.K., Davydov V.N. A finite element membrane model for the analysis of axisymmetric sheet metal forming processes // Int. J. Mech. Sci. 1992. V. 34. № 3. P. 179-193.

[3]

Петров В.К., Михайлова В.Л., Сухомлинов Л.Г. Применение осесимметричной жесткопластической безмоментной конечноэлементной модели для определения коэффициентов трения в процессах формоизменения листовых металлов // Известия МГТУ «МАМИ». 2012. Т. 2. № 2 (14). С. 150-158.

[4]

Михайлова В.Л., Петров В.К., Сухомлинов Л.Г. Конечноэлементный анализ предельного формоизменения тонкого алюминиевого листа при осесимметричном гидровыпучивании в матрицу с плоским дном // Известия Тульского государственного университета. Естественные науки. 2013. № 1. С. 99-110.

[5]

Михайлова В.Л., Петров В.К., Сухомлинов Л.Г. К оценке точности результатов численного моделирования в проблемaх формовки оболочек из листовых металлов // Известия МГТУ «МАМИ». 2013. Т. 2. № 2 (16). С. 154-158.

[6]

Хилл Р. Математическая теория пластичности. М.: ГИТТЛ, 1956.407 с.

[7]

Woo D.M. The analysis of axisymmetric forming of sheet metal and hydrostatic bulging process //Int.J.Mech.Sci. 1964. V. 6. P. 303-317.

[8]

Wang N.M., Shammamy M.R. On the plastic bulging of circular diaphragm by hydrostatic pressure //J.Mech.Phys. Solids. 1969. V. 17. P. 43-61.

RIGHTS & PERMISSIONS

Petrov V.K., Sukhomlinov L.G.

AI Summary AI Mindmap
PDF

142

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/