The new standard on the administrative aspect of registration changes in the design of the vehicle

Abstract

Eurasian integration in the economy makes it possible to establish unified principles and mandatory security requirements in standardization, metrology, accreditation, assessment of compliance, oversight (control), and eliminate technical barriers to trade. The system of technical regulation in the automotive industry is built according to international harmonized requirements, taking into account the safety of traffic. At the same time, the main instrument for implementing the technical regulations of the Customs Union “The Safety of Wheeled Vehicles” (TR TS 018/2011) is the development of interstate standards. The article presents the program of interstate standardization for vehicles in operation, which is carried out by the Interstate Technical Committee for Standardization “Road Safety” (ITC 278). Thus, for the first time, a standard has been developed for the administrative aspect of recording changes in the design of vehicles at the stage of the life cycle of operation, which will become effective from February 1, 2018. With the help of infographics, a clear algorithm for registering changes in the design at the stage of operation in the Russian Federation is presented. Independent professional multi-stage security design verification is adapted to the current realities and allows supporting the technical initiative of vehicle owners. The use of unified forms and this methodology is the next step to improve the regulatory and technical basis of technical regulation in the automotive field. The application of the official document will promote individualization and engineering creativity. Also, a new standard was announced for methods of monitoring the technical state at the operational stage. The article contains comments on the current legislation, and the conclusions contain the prospects for further scientific research. The information on the preparation of national regulations that establish relations in the field of the operation of road transport is also presented.

Keywords

vehicle / modification of design / technical examination / technical inspection / permission to register

References

[1] Принятые технические регламенты. Режим доступа: http://www.eurasiancommission.org (дата обращения: 30.11.2017).

[2] Кисуленко Б.В. Методология формирования требований к безопасности автотранспортных средств, реализуемых в их конструкции при проектировании: дис.. док. техн. наук. М.: ФГУП «НАМИ», 2011. 375 с.

[3] Правила ООН (Соглашение 1958 года) Режим доступа: http://www.unece.org/trans/main/wp29/wp29regs141-160.html (дата обращения: 30.11.2017).

[4] Мороз С.М., Парфенов Е.В., Зиновчук Д.В. Новый межгосударственный ГОСТ 33997-2016 Колесные транспортные средства. Требования к безопасности в эксплуатации и методы проверки // Журнал ААИ. 2017. № 6(107). С. 17-21.

[5] Кириллов К.А. Регламентация требований к безопасности автотранспортных средств (АТС) в Евразийском экономическом союзе (ЕАЭС), при внесении изменений в конструкцию // Труды НАМИ. 2016. № 3(266). С. 63-72.

[6] Программа межгосударственной стандартизации. Режим доступа: http://www.mgs.gost.ru/TKSUGGEST/MGSpublic.nsf/MainForm?ReadForm (дата обращения: 30.11.2017).

[7] Общественное обсуждение актуализации перечней стандартов к ТР ТС 018/2011. Режим доступа: https://docs.eaeunion.org/pd/ru-ru/0102134/pd_25092017 (дата обращения: 30.11.2017).

[8] Кириллов К.А. Методология формирования требований к безопасности конструкции колесных транспортных средств, при внесении изменений в их конструкцию, в том числе находящихся в эксплуатации, включая методы оценки и экспертизы // Труды НАМИ. 2017. № 2(269). С. 55-68.

RIGHTS & PERMISSIONS

Girutskiy O.I., Kirillov K.A.