One-dimensional univariate work simulation of turbocharged engine with restrictor before compressor inlet

Abstract

All over the world, and in Russia, especially, the engineering sports competitions "Formula Student" are gaining popularity. Formula Student - is an international competition held among students of technical universities, in order to get practical knowledge in the process of developing and building a Formula student class racecar. When creating a car, you must adhere to strict technical regulations. So, one of the limitations is the maximum engine capacity - 710 cubic meters, which, in itself, implies the use of a motorcycle engine. A mandatory condition is the presence of a restrictive nozzle (restrictor) which have 20 mm diameter and placing in the inlet system. This causes many problems when designing engine intake systems. However, it allowed using various systems of pressurization of engines. The most common and effective is the installation of the turbocharger. This helps to solve the problem of insufficient amount of air that entering to the engine. Moreover, with the correct configuration of all components of the intake system in combination with the turbocharger, it is possible to achieve power and torque exceeding the standard engine without a restrictive nozzle. The article presents the data obtained in the course of a one-dimensional simulation of the KTM LC4 engine with a turbocharger and a restrictor in the intake manifold. The purpose of the work is to reduce the negative influence of the restrictor on the power and torque parameters of the KTM LC4 engine by using a turbocharger. In the course of the work, an analysis was made of gas-dynamic processes occurring in various parts of the engine intake system that affect its output values based on numerical studies. Because of the research, the dependences of the output parameters of the engine (maximum power and maximum torque) on the parameters, shapes and sizes of various components of the intake system with a turbocharger.

Keywords

engine / restrictor / turbocharger / intake system / full-load curve

References

[1] SAE International 2017-18 Formula SAE® Rules Preliminary, 2016. 183 p.

[2] Brian Beach, Stoyan Hristov, Patrick Napier, Brian Robie, Paul Smith, Zachary Wilson Fsae Turbo-System Design, 2010. 93 p.

[3] Eric Griess, Kevin McCutcheon, Matthew Roberts Formula SAE Turbocharger System Development, 2012. 134 p.

[4] Julian Weber Automotive Development Processes, 2009. 312 p.

[5] Ricardo Software WAVE User manual version 2016.1, 2016. 2936 p.

RIGHTS & PERMISSIONS

Tatarov M.G.