Development of postprocessors for CNC "Axiom Control"

Abstract

BACKGROUND: Currently, the issue of using means of automation in various ways is widely studied in the worldwide industry. Use of the automatized systems at various stages of manufacturing leads to significant increase of labor productivity in various indicators and ensures solution of multiple problems related to cost reduction during manufacturing, increase of equipment performance and increase of quality of final products.

AIM: Formalization of the process of development of the control program for the CNC by means of creation of the postprocessors for the AksiOMA Control CNC.

METHODS: Key objects of study and interaction during operation are various means of automation (computer-aided design and the software which is necessary for work with postprocessors) necessary for development of products and describing the technology of machining of them with the consequent postprocessing to obtain the control program.

RESULTS: The result of the study is the development of the postprocessors for the consequent postprocessing of the control program has begun on the basis of the problem related to the development of the postprocessor for the AksiOMA Control CNC. In the manual of the CNC programmer, the base notation about the language syntax, control commands for the machining station and the CNC is given. The decision to begin the development of the postprocessor for the three-axial machining by means of editing the Siemens 840 basic postprocessor is made, because the control program syntax of it was similar to the syntax of the AksiOMA Control CNC system.

CONCLUSION: As the result of the conducted study, the role of the automatized systems in the process of design and development of control programs was considered. For solving the problem of the development of the postprocessors for the AksiOMA Control CNC, the IMSpost package for automatized postprocessor development was chosen.

Keywords

manufacturing / industry / machining / technological problems / visualizations of the AksiOMA Control CNC system

References

[1] Sosonkin VL, Martinov GM. Numerical control systems. Moscow: Logos; 2005.

[2] Сосонкин В.Л., Мартинов Г.М. Системы числового программного управления. М.: Логос, 2005.

[3] Sosonkin VL, Martinov GM. Programming of numerical control systems. Moscow: Logos; 2008.

[4] Сосонкин В.Л., Мартинов Г.М. Программирование систем числового программного управления. М.: Логос, 2008.

[5] Martinov GM, Martinova LI, Pushkov RL. Automation of technological processes in mechanical engineering. P. I. Numerical control software. Moscow: MGTU “STANKIN”; 2010.

[6] Мартинов Г.М., Мартинова Л.И., Пушков Р.Л. Автоматизация технологических процессов в машиностроении. Ч. I. Числовое программное управление. М.: МГТУ «СТАНКИН», 2010.

[7] Martinov GM, Martinova LI, Pushkov RL. Automation of technological processes in mechanical engineering. Moscow: MGTU “STANKIN”; 2011.

[8] Мартинов Г.М., Мартинова Л.И., Пушков Р.Л. Автоматизация технологических процессов в машиностроении. М.: МГТУ «СТАНКИН», 2011.

[9] Morozov VV, Grigoriev SN, Skhirtladze AG, et al. Milling tools. Vladimir: VlGU; 2014.

[10] Морозов В.В., Григорьев С.Н., Схиртладзе А.Г., и др. Фрезерный инструмент. Владимир: ВлГУ, 2014.

[11] Barbashov FA. Milling business. Moscow: Vysshaya shkola; 1975.

[12] Барбашов Ф.А. Фрезерное дело. М.: Высшая школа, 1975.

[13] Kuvshinskij VV. Milling. M.: Mashinostroenie; 1977.

[14] Кувшинский В.В. Фрезерование. М.: Машиностроение, 1977.

[15] Martinov GM, Kozak NV, Nezhmetdinov RA, et al. The specifics of building control panels of CNC systems by the type of universal hardware and software components. Avtomatizaciya i sovremennye tekhnologii. 2010;7:34–40.

[16] Мартинов Г.М., Козак Н.В., Нежметдинов Р.А., и др. Специфика построения панелей управления систем ЧПУ по типу универсальных программно-аппаратных компонентов // Автоматизация и современные технологии. 2010. № 7. C. 34–40.

[17] Nezhmetdinov RA, Sokolov SV, Obuhov AI, et al. Expanding the functionality of CNC systems for controlling mechanical laser processing. Avtomatizaciya v promyshlennosti. 2011;5:49–53.

[18] Нежметдинов Р.А., Соколов С.В., Обухов А.И., и др. Расширение функциональных возможностей систем ЧПУ для управления механо-лазерной обработкой // Автоматизация в промышленности. 2011. № 5. C. 49–53.

[19] Gusev SS, Makarov VV. Analysis of automatic design systems. Izvestiya MGTU «MAMI». 2024;18(1):63–74. doi: 10.17816/2074-0530-624783

[20] Гусев С.С., Макаров В.В. Анализ систем автоматического проектирования // Известия МГТУ «МАМИ». 2024. Т. 18, № 1. С. 63–74. doi: 10.17816/2074-0530-624783

[21] Gusev SS, Makarov VV. Analysis of existing means of the cutting tool path visualization in the CNC systems. Izvestiya MGTU «MAMI». 2024;18(2):157–167. doi: 10.17816/2074-0530-624784

[22] Гусев С.С., Макаров В.В. Анализ существующих средств визуализации траектории режущего инструмента в системах ЧПУ // Известия МГТУ «МАМИ». 2024. Т. 18, № 2. С. 157–167. doi: 10.17816/2074-0530-624784

RIGHTS & PERMISSIONS

Eco-Vector