Ways to improve performance of an internal combustion engine regarding the loading conditions of vehicle transmission

Abstract

BACKGROUND: Import substitution has become the most important direction of the development of the country's economy in the conditions of the sanctions policy. In this regard, high requirements are imposed on the production to ensure the competitiveness of automotive machinery. Automotive machinery is a key component of the country's economy that is confirmed by the growth of road transport. Meanwhile, growth of the vehicle fleet leads to increase in consuming of petroleum-derived fuel, which main disadvantage is emission of harmful substances, therefore, internal combustion engines of automotive machinery should ensure low fuel consumption and less emissions of harmful substances with exhaust gases. However, the engine operating modes largely depend on the loads generated in the vehicle transmission.

AIMS: To determine the possibilities of expanding the ranges of power regulation of an internal combustion engine of a vehicle, on the one hand, ensuring low fuel consumption and less emission of harmful substances with exhaust gases, and on the other hand, providing with the power required for a vehicle to move, regarding the type of transmission and propulsion.

METHODS: The analysis of possible conventional and unconventional operating cycles of an internal combustion engine is carried out. The method of mathematical modeling of the formation of torques in various types of vehicle transmission is used.

RESULTS: Possible ways of expanding the ranges of power regulation of an internal combustion engine providing with the required power, low fuel consumption and less emission of harmful substances with exhaust gases, as well as transmission layouts and processes of forming the required power in them to ensure the vehicle movement are considered.

CONCLUSIONS: The considered in the article approach of expanding the ranges of power regulation of an internal combustion engine of a vehicle makes it possible to conclude that it is necessary to use the principles of a scientific approach to the process of development of vehicle transmissions capable of controlling an internal combustion engine depending on loads, ensuring its operation with minimal fuel consumption and emission of harmful substances.

Keywords

engine operating modes / operating cycle / transmission / propulsion / power flows distribution

References

[1] Vyrubov DN, Ivashchenko NA, Ivin VI, et al. Internal combustion engines. Theory of reciprocating and combined engines: A textbook for higher educational institutions in the specialty "Internal combustion engines". Moscow: Mashinostroenie; 1983. (in Russ.)

[2] Вырубов Д.Н., Иващенко Н.А., Ивин В.И. и др. Двигатели внутреннего сгорания. Теория поршневых и комбинированных двигателей: Учебник для втузов по специальности «Двигатели внутреннего сгорания». M.: Машиностроение, 1983.

[3] Berdnikov AA, Mingazov SR, Zhukov AA. Increasing the economic performance of internal combustion engines by turning off part of the cylinders. Sovremennye naukoemkie tekhnologii. 2017;1:12–16. (in Russ.)

[4] Бердников А.А., Мингазов С.Р., Жуков А.А. Повышение экономических показателей двигателей внутреннего сгорания путем отключения части цилиндров // Современные наукоемкие технологии. 2017. № 1. С. 12–16.

[5] Berdnikov AA, Nagaitsev DS, Titkov NV. Internal combustion engine with non-traditional duty cycle. Fundamentalnye issledovaniya. 2017;1:21–25. (in Russ.)

[6] Бердников А.А., Нагайцев Д.С., Титков Н.В. Двигатель внутреннего сгорания с нетрадиционным рабочим циклом // Фундаментальные исследования. 2017. № 1. С. 21–25.

[7] Ter-Mkrtichyan GG. Internal combustion engines with non-traditional work cycles: textbook. allowance. Moscow: MADI; 2015. (in Russ.)

[8] Тер-Мкртичьян Г.Г. Двигатели внутреннего сгорания с нетрадиционными рабочими циклами: учеб. пособие. М.: МАДИ, 2015.

[9] Five-stroke engine works and can go into production [internet] Accessed: 10.04.23. Available from: http://autoutro.ru/review/2014/11/19/pyatitaktnyj-dvigatel-rabotayet-i-mozhet-pojti-v-proizvodstvo

[10] Пятитактный двигатель работает и может пойти в производство. Дата обращения: 10.04.23. Режим доступа: http://autoutro.ru/review/2014/11/19/pyatitaktnyj-dvigatel-rabotayet-i-mozhet-pojti-v-proizvodstvo

[11] SCUDERI™ Split-Cycle Engine – a fundamentally new scheme of a four-stroke motor with a "separate cycle" [internet] Accessed: 10.04.23. Available from: http://enginepro.ru/?p=698

[12] SCUDERI™ Split-Cycle Engine – принципиально новая схема четырехтактного мотора с «раздельным циклом». Дата обращения: 10.04.23. Режим доступа: http://enginepro.ru/?p=698

[13] Berdnikov AA. Evaluation of the mobility of active road trains. Perm: Izd-vo PVI voysk natsionalnoy gvardii; 2022. (in Russ.)

[14] Бердников А.А. Оценка подвижности активных автопоездов. Пермь: Изд-во ПВИ войск национальной гвардии, 2022.

[15] Belousov BN, Popov SD. Wheeled vehicles of extra large payload capacity. Design. Theory. Calculation. Moscow: MGTU im NE Baumana; 2006. (in Russ.)

[16] Белоусов Б.Н., Попов С.Д. Колесные транспортные средства особо большой грузоподъемности. Конструкция. Теория. Расчет. М.: Изд-во МГТУ имени Н.Э. Баумана, 2006.

[17] Belousov BN, Shukhman SB. Applied mechanics of ground traction vehicles with mechatronic systems: monograph. Moscow: Agrokonsalt; 2013. (in Russ.)

[18] Белоусов Б.Н., Шухман С.Б. Прикладная механика наземных тягово-транспортных средств с мехатронными системами: монография. М.: Агроконсалт, 2013.

[19] Ushnurtsev SV, Keller AV. General provisions for optimizing power distribution in the transmission of military vehicles. Strategicheskaya stabilnost. 2022;2(99):57–64. (in Russ.)

[20] Ушнурцев С.В., Келлер А.В. Общие положения оптимизации распределения мощности в трансмиссии военной автомобильной техники // Стратегическая стабильность. 2022. № 2(99). С. 57–64.

[21] Lyandenburgsky VV, Shaikhov RF, Ponomarev VM, et al. Fundamentals of car design: chassis, transmission: textbook. Penza: Izd-vo PGAUS; 2014. (in Russ.)

[22] Лянденбурский В.В., Шаихов Р.Ф., Пономарев В.М., и др. Основы конструкции автомобилей: шасси, трансмиссия: учебное пособие. Пенза: Изд-во ПГАУС, 2014.

RIGHTS & PERMISSIONS

Eco-Vector