Increasing the efficiency of the lubrication system of a modern internal combustion diesel engine

Abstract

BACKGROUND: Leading manufacturers of engines for trucks are constantly competing and trying to create engines with the best consumer characteristics, which at the same time meet modern environmental standards. One of the most important characteristics for long-haul tractors is fuel efficiency. As a way to improve this parameter, it was chosen to reduce the loss of mechanical energy to drive the oil pump.

AIMS: To determine the current level of mechanical losses in the drive of the oil pump of the KAMAZ 6ChN13/15 engine, to form a set of solutions to reduce losses.

METHODS: The current pattern of mechanical losses distribution for the 6ChN13/15 engine was obtained by engine motoring at the engine bench with sequential removal of engine components. A comparative diagram of the overpressure at the outlet of the uncontrolled and controlled pumps was obtained empirically during tests at the engine bench. The evaluation of the positive effect from the use of a controlled oil pump was determined analytically.

RESULTS: As a result, by using a controlled oil pump, it became possible to reduce the excess pressure at the outlet of the pump at nominal rotational speed by 25%, which theoretically should reduce the relative mechanical losses of the engine by 3%.

CONCLUSIONS: The practical value of the study lies in determining effective ways to reduce mechanical energy losses and improve the consumer qualities of modern diesel engines.

Keywords

internal combustion engine / oil pump / mechanical losses / vane pump

References

[1] Kolchin AI, Demidov VP. Calculation of automobile and tractor engines. Moscow: Vysshaya shkola; 2008. (in Russ).

[2] Колчин А.И., Демидов В.П. Расчет автомобильных и тракторных двигателей. М.: Высшая школа, 2008.

[3] Chainov ND, Ivashchenko NA, Krasnokutsky AN, et al. Designing internal combustion engines: A textbook for universities. editor Chainov ND. Moscow: Mashinostroenie; 2008. (in Russ).

[4] Чайнов Н.Д., Иващенко Н.А., Краснокутский А.Н. и др. Конструирование двигателей внутреннего сгорания: Учебник для ВУЗов. под. ред. Чайнова Н.Д. М.: Машиностроение, 2008.

[5] Putintsev SV. Mechanical Losses in Reciprocating Engines: A Tutorial. Moscow: MGTU im. N. Baumana; 2011. (in Russ).

[6] Путинцев C.B. Механические потери в поршневых двигателях: Учебное пособие. М.: МГТУ им. Н. Баумана, 2011.

[7] Shchukina VN. Analysis of methods for determining mechanical losses for their subsequent application during operation. Vestnik Federalnogo gosudarstvennogo obrazovatelnogo uchrezhdeniya vysshego professionalnogo obrazovaniya “Moskovskiy gosudarstvennyy agroinzhenernyy universi-tet imeni V.P. Goryachkina”. 2016;5(75):18–21. (in Russ).

[8] Щукина В.Н. Анализ методов определения механических потерь для их последующего применения в процессе эксплуатации // Вестник Федерального государственного образовательного учреждения высшего профессионального образования «Московский государственный агроинженерный университет имени В.П. Горячкина». 2016. № 5(75). С. 18–21.

[9] Beroun S, Páv K. Vybrané statě z vozidlových spalovacích motorů: (doplňková skripta pro magisterský studijní program). Liberec: Technická univerzita v Liberci; 2013. (in Czech).

[10] Beroun S., Páv K. Vybrané statě z vozidlových spalovacích motorů: (doplňková skripta pro magisterský studijní program). Liberec: Technická univerzita v Liberci, 2013.

[11] Procházka R, Dittrich A, Voženílek R, et al. New Ways to Measure Mechanical Losses by Motoring an ICE with Increased Cylinder Pressure. Applied Sciences. 2022;12(4):2155. doi: 10.3390/app12042155

[12] Procházka R., Dittrich A., Voženílek R., et al. New Ways to Measure Mechanical Losses by Motoring an ICE with Increased Cylinder Pressure // Applied Sciences. 2022. Vol. 12, N 4. P. 2155. doi: 10.3390/app12042155

[13] Anuryev VI. Handbook of the designer-machine builder: In 3 vols. Vol. 3. 8th ed., revised. and updated. editor Zhestkova IN. Moscow: Mashinostroenie; 2001. (in Russ).

[14] Анурьев В.И. Cправочник конструктора-машиностроителя: В 3 т. Т. 3. 8-е изд., перераб. и доп. под. ред. Жестковой И.Н. М.: Машиностроение, 2001.

[15] Oil management for commercial vehicles [internet]. Available from: https://www.mahle.com/en/products-and-services/commercial-vehicles/oil-management/ Accassed: 30.05.2022.

[16] Oil management for commercial vehicles [internet]. Режим доступа: https://www.mahle.com/en/products-and-services/commercial-vehicles/oil-management/ Дата обращения: 30.05.2022.

RIGHTS & PERMISSIONS

Khannanov M.D., Alimgulov E.R., Fardeev L.I., Kulikov A.S., Gumerov I.F., Gubaidullin R.R., Mukanov G.Z., Doikin A.A.