Optimal thickness of the coating Shell of silicon carbide based on the study of barrier function

Igor Anatolievich Voronov

Russian Journal of Dentistry ›› 2015, Vol. 19 ›› Issue (3) : 9 -12.

PDF
Russian Journal of Dentistry ›› 2015, Vol. 19 ›› Issue (3) : 9 -12. DOI: 10.17816/dent.39288
Articles
research-article

Optimal thickness of the coating Shell of silicon carbide based on the study of barrier function

Author information +
History +
PDF

Abstract

Justification of optimum thickness of a covering "Armour" from silicon carbide on the basis of studying of its barrier function to potentially dangerous products of migration from stomatologic the polimetilmetakrilatnykh ofplastic for basis of artificial limbs on the example ofstomatologic polimetilmetakrilatny plastic ("Ftoraks" of Stoma, Ukraine") with the different thickness ofa covering (800, 1600 nanometers) proved protective properties of a covering "Armour" from silicon carbide which reduces migration levels from bases of the artificial limbs made of them, potentially dangerous connections. The covering "Armour" 800 nanometers thick by 1,45 times passes less MMA in comparison with the samples unprotected by a covering, and 1600 nanometers thick (approximately by 49 times) is 2-6 times less than maximum concentration limit. Reducing levels of migration ofpotentially dangerous products, especially with a covering of 1600 nanometers, the covering "Armour" reduces chemical risk factor of use of the materials "Ftoraks" on appointment.

Keywords

monomer / methylmethacrylate / plastics / migration / protective coating

Cite this article

Download citation ▾
Igor Anatolievich Voronov. Optimal thickness of the coating Shell of silicon carbide based on the study of barrier function. Russian Journal of Dentistry, 2015, 19(3): 9-12 DOI:10.17816/dent.39288

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Воронов И.А., Митрофанов Е.А., Калинин А.Л., Семакин С.Б., Диденко Л.В. Разработка нового покрытия из карбида кремния для защиты зубных протезов от биодеструкции. Российский стоматологический журнал. 2014; 1: 4-9.

[2]

Заявка на патент № 2013127770 от 19 июня 2013 г.

[3]

Ланина С.Я. Методологические и методические вопросы гигиены и токсикологии полимерных материалов и изделий медицинского назначения. Научный обзор. М.; 1982: 61-86.

[4]

ГОСТ Р ИСО 10993.12-99. «Изделия медицинские. Оценка биологического действия медицинских изделий. Ч. 12. Приготовление проб и стандартные образцы».

[5]

ГОСТ Р 52770-2007. «Изделия медицинские. Требования безопасности. Методы санитарно-химических и токсикологических испытаний».

[6]

Предельно допустимые количества химических веществ, выделяющихся из материалов, контактирующих с пищевыми продуктами. Гигиенические нормативы. ГН 2.3.3.972-00. МЗ РФ, М.; 2000: 16-25.

[7]

ГОСТ Р 50855-96. Контейнеры для крови и ее компонентов. Требования химической и биологической безопасности и методы испытаний. М.; 1996.

RIGHTS & PERMISSIONS

Eco-Vector

AI Summary AI Mindmap
PDF

39

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/