Review modern materials for the manufacturing ceramic crowns at the chairside by the method of computer milling

Abstract

The review of modern ceramic materials for CAD/CAM technologies at the chairside for optimization of selection of blocks for manufacturing CEREC crowns for the different clinical cases.

Keywords

CAD/CAM / CEREC / CAD/CAM / CEREC / chairside / fixed / ceramic blocks / disilicate lithium / «Suprinity» / «Celtra Duo / «VITABLOCS Mark II» / «IPS E.max CAD» / operational properties

References

[1] Bindl A.H., Luthy W.H. Mormann Strength and fracture pattern of monolithic CAD/CAM-generated posterior crowns. Dent. Materials. 2006; 22(1): 29-36.

[2] Bindl A., Richter B., Mormann W. The proven, esthetic selection of CAD/CAM materials. Int. J. Prosthodont. 2005; 18: 219-24.

[3] Fradeani M. Стеклокерамические реставрации на основе дисиликата лития. Показания к применению и методические рекомендации. Квинтэссенция. 2002; 2: 7-16.

[4] McLaren E., Edwar A., Russell A. A new option for single or multiunit all-ceramic anterior restoration. Quintessence Dent. Technol. 2010: 26: 69-81.

[5] Tinschert J., Zwez D., Marx R., Anusavice K.J. Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics. Dentistry. 2000; 28(7): 529-35.

[6] Официальная брошюра «IPS E. max CAD» Ivoclar Vivadent, Лихтенштейн.

[7] Scientific Documentation IPS E. max CAD P.1-16.

[8] Scientific Report IPS E. max Vol. 02/2001-2013.

[9] Ostermann D. Результат революции в стеклокерамике - Vita Suprinity. Зубной техник. 2013; 6: 24-5.

[10] Официальная брошюра «Suprinity» Vita Zahnfabrik, Германия. 08.2013.

[11] J. Dent. Visionist. 2013; 2: 1-19.

[12] Официальная брошюра «Celtra DUO" Dentsply, Degudent GmbH, Германия.

[13] Захаров Д.З. Современные керамические материалы, используемые в ортопедической стоматологии для изготовления зубных протезов. Стоматология. 2009; 2: 80-2.

[14] Guazzato M., Albakry M., Ringer S.P., Swain M.V. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics. Dent. Materials. 2004; 20(5): 441-8.

[15] Quinn J.B., Sundar V., Lloyd I.K. Influence of microstructure and chemistry on the fracture toughness of dental ceramics. Dent. Materials. 2003; 19(7): 603-11.

[16] Denry I., Holloway J. Ceramics for dental applications: A review. Materials. 2010; 3(1): 351-68.

[17] Zimmermanna M., Mehlb A., Reich S. New CAD/CAM materials and blocks for chairside procedures. Int. J. Computer. Dent. 2013; 16: 173-81.

[18] Вафин С.М. Сравнительные испытания керамических блоков «Vitablocs Mark II” и ситалловых блоков “Симет” на определение относительного предела прочности на сжатие и их микротвердости. В кн.: Сборник трудов Конференции молодых ученых стоматологов-ортопедов, посвященной проф. В.Ю. Курляндскому. М.; 2004.

[19] McLaren E., Puri S. CEREC materials overview. Different selections for milling restorations. CERECDoctors. 2013; 1: 52-5.

[20] Vich A., Sedda M., Del Siena F., Louca C., Ferrari M. Flexural resistance of Cerec CAD/CAM system ceramic blocks. Part 1: Chairside materials. Am. J. Dentistry. 2013; 26(5): 255-9.

[21] Официальная брошюра «Vitablocs» Vita Zahnfabrik, Германия. 03.2012.

[22] Donovan T.E., Cho G.C. The role of all-ceramic crowns in contemporary restorative dentistry. Am. Dent. Assoc. J. 2003; 31(7): 565-9.

[23] Jenatschke R., Fischer C. В центре внимания выбор материала. Новое в стоматологии. 2013; 7: 50-60.

[24] Доменюк Д.А., Гаража С.Н., Иванчева Е.Н. Прогнозирование клинической эффективности цельнокерамических реставраций с учетом микроструктурных особенностей. Российский стоматологический журнал. 2010; 4: 10-2.

[25] Xu H. Measurement of thermal expansion coefficient of human teeth. Aust. Dent. J. 1989; 34(6): 530-5.

[26] Chen S., Zhang Z.T. Three-year clinical observation and failure analysis of all-ceramic restorations made by chair-side computer aided design and computer aided manufacture system. Chin. J. Stomatol. 2007; 42(6): 337-9.

[27] Mao Y., Gao Y., Wang Z.Y., Gao B., Ma C.F. An 8-year follow-up study of Cerec2 computer aided design and computer aided manufacture of all-ceramic crowns. Chin. J. Stomatol. 2008; 43(12): 752-3.

[28] Reiss B. Klinische Uberlebensrate von Restaurationen aus VITABLOCS for CEREC. Int. J. Comp. Dentistry. 2006; 9: 11-22.

[29] Fasbinder D.J., Dennison J.B., Heys D., Neiva G. A clinical evaluation of chairside lithium disilicate CAD/CAM crowns: a two-year report. J. Am. Dent. Assoc. 2010; 141: 10-4.

[30] Reich S., Fischer S., Sobotta B., Klapper H.U., Gozdowski S. A preliminary study on the short-term efficacy of chairside computeraided design/computer-assisted manufacturing-generated posterior lithium disilicate crowns. Int. J. Prosthodont. 2010; 23: 214-6.

[31] Bindl A., Mormann W.H. Survival rate of mono-ceramic and ceramic-core CAD/CAM-generated anterior crowns over 2-5 years. Eur. J. Oral Sci. 2010; 112(2): 197-204.

[32] Nathanson D. Clinical performance and fit of a milled ceramic crown system. IADRAbstr. 2008; 303: 101-12.

[33] Pjetursson B.E., Sailer I., Zwahlen M. A systematic review of the survival and complication rates of all ceramic and metal-ceramic reconstructions after an observation period of at least 3 years. Part I: single crowns. Clin. Oral Implant. Res. 2007; 3: 73-85.

[34] Reich S., Schierz O. Chair-side generated posterior lithium disilicate crowns after 4 years. Clin. Oral Invest. J. 2012; 17(1): 275-84.

[35] Richter J., Schweiger J., Gernet W., Beuer F. Clinical Performance of CAD/CAM-fabricated lithium disilicate restorations. IADR Abstr. 2009; 82: 98-101.

[36] Schultheis S., Strub J.R., Gerds T.A., Guess P.C. Monolithic and bilayer CAD/CAM lithium-disilicate versus metal-ceramic fixed dental prostheses: comparison of fracture loads and failure modes after fatigue. Clin. Oral Invest. 2012; 23: 151-9.

[37] Van Noort R. An Introduction to Dental Materials. Edinburgh: Mosby; 2002.

[38] Strub J.R. Fatigue Behaviour and Failure Modes of Monolithic CAD/CAM Hybrid-ceramic and All-ceramic Posterior Crown Restorations; 2013.

RIGHTS & PERMISSIONS

Eco-Vector