Assessment of the capabilities of orthopedic departments of medical organizations to implement modern technologies

R. S. Gvetadze; Valentina G. Butova; D. E. Timofeev; S. N. Andreeva

doi:10.17816/1728-2802-2020-24-4-256-261

Russian Journal of Dentistry ›› 2020, Vol. 24 ›› Issue (4) : 256 -261. DOI: 10.17816/1728-2802-2020-24-4-256-261

Organization of Healthcare Service

research-article

Assessment of the capabilities of orthopedic departments of medical organizations to implement modern technologies

Author information +

History +

PDF

Abstract

The study showed the presence of negative dynamics in the provision of the population with orthopedic dentists and dental technicians, as well as a decrease in the staffing of medical organizations with these specialists. The fact of exceeding the basic rate of loss of dental technicians over the same indicator for dentists-orthopedists by 2 times was established. Since the coefficient of concurrency among dentists-orthopedists and dental technicians is less than the average for the specialty, the possibility of increasing the availability of personnel by combining positions is revealed. The trends of decreasing interest of specialists in obtaining qualification categories are noted. According to the survey of 305 specialists, a model of the most probable structural “profile” of a dentist-orthopedist was created and the characteristic features of the learning processes and practical use of knowledge on the main new technologies in orthopedic dentistry were determined. There are limited opportunities to improve the availability and quality of dental orthopedic care and the introduction of new prosthetics technologies as indicated by the data obtained in the course of the study.

Keywords

indicators of work of the dentist-orthopedist

Cite this article

Download citation ▾

R. S. Gvetadze, Valentina G. Butova, D. E. Timofeev, S. N. Andreeva. Assessment of the capabilities of orthopedic departments of medical organizations to implement modern technologies. Russian Journal of Dentistry, 2020, 24(4): 256-261 DOI:10.17816/1728-2802-2020-24-4-256-261

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Ryakhovsky AN. New concept of 4D virtual planning in dentistry. Tsifrovaya stomatologiya. 2019;10(1):11–21. (in Russian)

[2]	Ряховский А.Н. Новая концепция 4Д виртуального планирования в стоматологии. Цифровая стоматология. 2019;10(1):11–21.

[3]	Astvatsatryan LE, Gazhva SI. Modern aspects of the use of 3D technologies in the manufacture of removable dentures. Sovremennye problemy nauki i obrazovaniya. 2017;(5):194. (in Russian)

[4]	Аствацатрян Л.Э., Гажва С.И. Современные аспекты использования 3D-технологий в изготовлении съёмных зубных протезов. Современные проблемы науки и образования. 2017;(5):194.

[5]	Ryakhovsky AN, Tikhon YuV. Analysis of color characteristics in various combinations of the material of the stump of the tooth and the material of the frame of the fixed prosthesis. Rossiiskii stomatologicheskii zhurnal. 2018;22(1):50–4. (in Russian)

[6]	Ряховский А.Н., Тихон Ю.В. Анализ цветовых характеристик при различных сочетаниях материала культи зуба и материала каркаса несъем-ного протеза. Российский стоматологический журнал. 2018;22(1):50–4.

[7]	Gvetadze RSh, Timofeeva DE, Butova VG, Andreeva SN. Digital technologies in dentistry. Rossiiskii stomatologicheskii zhurnal. 2018;22(5):224–8. (in Russian)

[8]	Гветадзе Р.Ш., Тимофеев Д.Е., Бутова В.Г., Андреева С.Н. Цифровые технологии в стоматологии. Российский стоматологический журнал. 2018;22(5):224–8.