Evaluation of methods for experimental and analytical determination of the contour area of the contact patch of a pneumatic tire with a support base

A. V. Lipkan' , A. N. Panasyuk , Z. A. Godzhayev , A. V. Lavrov , A. V. Rusanov , V. A. Kazakova

Tractors and Agricultural Machinery ›› 2021, Vol. 88 ›› Issue (1) : 40 -50.

PDF (882KB)
Tractors and Agricultural Machinery ›› 2021, Vol. 88 ›› Issue (1) :40 -50. DOI: 10.31992/0321-4443-2021-1-40-50
Articles
research-article

Evaluation of methods for experimental and analytical determination of the contour area of the contact patch of a pneumatic tire with a support base

Author information +
History +
PDF (882KB)

Abstract

The results of experiments on the estimation of the error of methods of experimental and calculated determination of the contour area for the ecological assessment of a mobile energy device are presented. There was used the example of modern radial tires 360/70R24 of Bel-89 and 18.4R34 of F-11 agricultural tractor MTZ-1025.2. in modes of non-nominal loading at nominal load on tires and changes in tire pressure within the range recommended for field work. assess the possibility of improving the computational method for determining the contour area of the contact patch of the tire tread of a pneumatic wheel based on the mathematical model of V.L. Biederman. The assessment was carried out for four ways of determining the area of the tire contact patch: 1) directly measuring the area using a digital photograph of the tire contact patch in Kompas-3D V13 software with the determination of the scaling and method error using a square from 100x100 mm graph paper; 2) calculation by the formula of the area of an ellipse, using the length and width of the tire contact patch, measured with a tape measure directly from the obtained print; 3) by calculation, determined from the digital photograph in Kompas-3D V13 software; 4) by calculation, determined by calculation using the parameters of the universal tire characteristic (UTC).

As a result of the experiments, it was found that for modern radial tractor tires, the static deformation of which does not exceed 18–22 %, the method of theoretical determination of the contour area of the tire contact patch using the UTC parameters can be applied with sufficient (for engineering practice) accuracy. Full convergence of the calculated and experimental contour areas of the tire contact patch can be provided by the coefficient of their ratio. The carried out assessment of the possibility of using methods for calculating the conditional contour area of the tire showed that these methods can be well used for a comparative assessment of the technogenic mechanical impact of propellers on the soil.

Keywords

propeller / deformation / characteristic / method / contour area / support base / maximum pressure

Cite this article

Download citation ▾
A. V. Lipkan', A. N. Panasyuk, Z. A. Godzhayev, A. V. Lavrov, A. V. Rusanov, V. A. Kazakova. Evaluation of methods for experimental and analytical determination of the contour area of the contact patch of a pneumatic tire with a support base. Tractors and Agricultural Machinery, 2021, 88(1): 40-50 DOI:10.31992/0321-4443-2021-1-40-50

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

GOST R 58656-2019 Agricultural mobile equipment. Methods for determining the impact of propellers on the soil. Moscow: Standartinform Publ., 2019. 23 p.

[2]

ГОСТ Р 58656-2019 Техника сельскохозяйственная мобильная. Методы определения воздействия движителей на почву. М.: Стандартинформ, 2019. 23 с.

[3]

Ksenevich I.P., Skotnikov V.A., Lyasko M.I. Khodovaya sistema – pochva – urozhay [Undercarriage-soil-crop]. Moscow: Agropromizdat Publ., 1985. 304 p.

[4]

Ксеневич И.П., Скотников В.А., Ляско М.И. Ходовая система-почва-урожай. М.: Агропромиздат, 1985. 304 с.

[5]

GOST 7057-2001 Agricultural tractors. Test methods. Moscow: IPK Izdatel’stvo standartov Publ., 2002. 11 p.

[6]

ГОСТ 7057-2001 Тракторы сельскохозяйственные. Методы испытаний. М.: ИПК Издательство стандартов, 2002. 11 с.

[7]

GOST 7463-2003 Pneumatic tires for tractors and agricultural machinery. Technical conditions. Moscow: IPK Izdatel’stvo standartov Publ., 2004. 28 p.

[8]

ГОСТ 7463-2003 Шины пневматические для тракторов и сельскохозяйственных машин. Технические условия. М.: ИПК Издательство стандартов, 2004. 28 с.

[9]

URL: http://www.michelinag.com.

[10]

www.michelinag.com.

[11]

UN/ECE Regulation No.106.

[12]

6. UN/ECE Regulation No.106.

[13]

Michelin Agriculture and Compact Line Data Book. 2013. URL: http://www.michelinag.com.

[14]

Michelin Agriculture and Compact Line Data Book. - 2013. (www.michelinag.com).

[15]

Data book for Firestone brand AG tires. 2011. URL: http://www.firestoneag.com.

[16]

Data book for Firestone brand AG tires. - 2011. (www.firestoneag.com).

[17]

Experience the Good Year advantage. 2014. URL: http://www.titan-intl.com.

[18]

Experience the Good Year advantage. - 2014. (www.titan-intl.com).

[19]

The Power beneath Blue Power. URL: http:// www.trelleborg.com/wheelsystems_us.

[20]

The Power beneath Blue Power (www.trelleborg.com/wheelsystems_us).

[21]

Agricultural tires. Technical data book 2nd edition. Mitas. 2014. URL: http://www.mitasag.com.

[22]

Agricultural tires. Technical data book 2nd edition. Mitas. - 2014. (www.mitasag.com).

[23]

Bridgestone VT-Tractor tyres. URL: http://www.bridgestone.co.uk.

[24]

Bridgestone VT-Tractor tyres. (www.bridgestone.co.uk).

[25]

Rebrov YU.A., Migushchenko R.P. The use of information technology in the identification of indicators of innovative tractor agricultural tires of IF and VF categories. Mekhanіka ta mashinobuduvannya. 2015. No 1, pp. 98−105 (In Russ.).

[26]

Ребров Ю.А., Мигущенко Р.П. Использование информационных технологий при идентификации показателей инновационных тракторных сельскохозяйственных шин категорий IF и VF // Механіка та машинобудування. 2015. № 1. С. 98-105.

[27]

Lipkan’ A.V., Panasyuk A.N., Kashbulgayanov R.A. Substantiation of the choice of the method for determining the parameters of the contact patch of the pneumatic wheel propeller with the support base. Byulleten’ nauki i praktiki. 2019. Vol. 5. No 6, pp. 212−228 (In Russ.). DOI: 10.33619/2414-2948/43/27.

[28]

Липкань А.В., Панасюк А.Н., Кашбулгаянов Р.А. Обоснование выбора способа определения параметров пятна контакта пневмоколесного движителя с опорным основанием // Бюллетень науки и практики. 2019. Т. 5. № 6. С. 212-228. https://doi.org/10.33619/2414-2948/43/27.

[29]

Lipkan’ A.V., Panasyuk A.N., Kashbulgayanov R.A. Opredeleniye parametrov universal’noy kharakteristiki i ekspluatatsionnykh parametrov shiny kak yedinichnogo kolesnogo dvizhitelya: metodicheskiye rekomendatsii [Determination of the parameters of the universal characteristics and operational parameters of the tire as a single wheel propeller: methodological recommendations]: M-vo vyssh. obrazovaniya i nauki RF; Dal’nevost. nauch.-issled. In-t mekhanizatsii i elektrifikatsii s.kh. Blagoveshchensk: Izd-vo Dal’nevost. gos. agrar. un-ta Publ., 2019. 44 p. ISBN 978-5-9642-0475-6.

[30]

Липкань А.В., Панасюк А.Н., Кашбулгаянов Р.А. Определение параметров универсальной характеристики и эксплуатационных параметров шины как единичного колесного движителя: методические рекомендации: М-во высш. образования и науки РФ; Дальневост. науч.-исслед. Ин-т механизации и электрификации с.х. Благовещенск: Изд-во Дальневост. гос. аграр. ун-та, 2019. 44, [1] c.; ил. ISBN 978-5-9642-0475-6.

RIGHTS & PERMISSIONS

Lipkan A.V., Panasyuk A.N., Godzhayev Z.A., Lavrov A.V., Rusanov A.V., Kazakova V.A.

PDF (882KB)

168

Accesses

0

Citation

Detail

Sections
Recommended

/