Improving eccentric drilling-and-milling chuck by indices of tool clamping force

Yu N Kuznetsov; Khasan Al-Dabas; I I Manilo

doi:10.17816/0321-4443-68784

Tractors and Agricultural Machinery ›› 2009, Vol. 76 ›› Issue (9) :54 -56. DOI: 10.17816/0321-4443-68784

Articles

other

Improving eccentric drilling-and-milling chuck by indices of tool clamping force

Author information +

History +

PDF

Abstract

The eccentric tool tightening chuck with two cinematic circuits «wedge-eccentric cam» and an intensifying link was offered. Two stages of work of the eccentric boring-and-milling chuck (EBMC), which provide the creation of necessary force for tool clamping, were shown. Adduced were the calculation and function-structural diagrams and conditions for definition of reinforcement coefficients of EBMC due two cinematic circuits in order to receive the necessary radial tool clamping force from one eccentric.

Keywords

eccentric tool tightening chucks / cinematic circuits «wedge - eccentric cam» / intensifying link / radial tool clamping force

Cite this article

Download citation ▾

Yu N Kuznetsov, Khasan Al-Dabas, I I Manilo. Improving eccentric drilling-and-milling chuck by indices of tool clamping force. Tractors and Agricultural Machinery, 2009, 76(9): 54-56 DOI:10.17816/0321-4443-68784

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Синтез эксцентриковых инструментальных зажимных патронов для сверлильно-фрезерных станков ремонтного производства / Ю.Н. Кузнецов и др. // Тракторы и сельхозмашины. - 2009, №8.

[2]	Кузнецов Ю.Н., Хасан Аль-Дабас. Эксцентриковый инструментальный зажимной патрон с двумя кинематическими цепями / В сб. мат-лов междунар. научн.-практ. конф. «Инновационные пути решения проблем АПК». - Курган: КГСХА, 2009. Т. 2.