Substantiation of dimensions of groove cylindrical seals of centrifuges with hydraulic drive

A. V Snezhko

doi:10.17816/0321-4443-66043

Tractors and Agricultural Machinery ›› 2015, Vol. 82 ›› Issue (7) :27 -30. DOI: 10.17816/0321-4443-66043

Articles

research-article

Substantiation of dimensions of groove cylindrical seals of centrifuges with hydraulic drive

A. V Snezhko

Author information +

History +

PDF

Abstract

A calculation method for geometrical parameters of cylindrical rotor seals of cleaning centrifuges with hydrojet drive is developed. Different variants of seal arrangement in centrifuge are considered. Results of calculations of seal parameters for three various dimension-types used in serial centrifuges under various liquid pressures are given.

Keywords

centrifuge / hydrojet drive / cylindrical seal / sliding bearing / radial clearance

Cite this article

Download citation ▾

A. V Snezhko. Substantiation of dimensions of groove cylindrical seals of centrifuges with hydraulic drive. Tractors and Agricultural Machinery, 2015, 82(7): 27-30 DOI:10.17816/0321-4443-66043

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Коровчинский М.В. Теоретические основы работы подшипников скольжения. - М.: Машгиз, 1959.

[2]	Чернавский С.А. Подшипники скольжения. - М.: Машгиз, 1963.

[3]	Альшиц И.Я. и др. Опоры скольжения. - Киев, М.: Машгиз, 1958.

[4]	Григорьев М.А., Покровский Г.П. Автомобильные и тракторные центрифуги. - М.: Машгиз, 1961.