Forecasting the resource of console-fixed parts during wear with account of permissible stresses

Abstract

BACKGROUND: Often, parts of the working bodies of machines operating in abrasive environments have a cantilever mount. Due to wear, their dimensions are lost, specified by the technical conditions, and destruction occurs. The resource of these products is determined by the allowable bending stresses, taking into account the intensity of their wear. The existing theoretical methods for predicting the operating time of a part to its limiting state when solving problems do not take into account the criteria of strength and wear in the complex.

AIMS: The aim consists in obtaining a mathematical expression that determines the resource of the part when it is worn, taking into account the allowable stresses.

METHODS: The disclosure of the goal was carried out by solving the problem of predicting the resource of a cantilever-fixed using the classical course of the resistance of materials, ele-ments of the theory of elasticity and the basics of tribotechnics.

RESULTS: As a result of mathematical research and based on practical knowledge, a formula was obtained for determining the resource of a part, which takes into account the dimensions of the part, the magnitude of the allowable stresses, the coefficient regulating the resistance of the material to wear, the pressure on the working surface, the pressure at the pinch point and the pres-sure at the free end timber. The conditions determined by two inequalities are established under which the part will be operable.

CONCLUSION: Mathematical expressions have been obtained that make it possible to predict and the conditions for the performance of cantilever-fixed parts in the process of their wear ac-cording to allowable stresses have been determined.

Keywords

cantilevered parts / wear / permissible stresses / prediction / resource / working conditions / wear resistance

References

[1] Malushin NN, Valuev DV. Ispytaniya detalei metallurgicheskogo oborudovaniya na iznosostoikost' i kontaktnuyu prochnost' prednaznachennogo dlya proizvodstva detalei gorno-shakhtnogo oborudovaniya. Gornyi informatsionno-analiticheskii byulleten' (nauchno-tekhnicheskii zhurnal). 2012;(12):90–95. (In Russ).

[2] Малушин Н.Н., Валуев Д.В. Испытания деталей металлургического оборудования на износостойкость и контактную прочность предназначенного для производства деталей горно-шахтного оборудования // Горный информационно-аналитический бюллетень (научно-технический журнал). 2012. № 12. С. 90–95.

[3] Kosenko EA, Baurova NI, Zorin VA. Steel intensity decrease of operating equipment of road machines due to use of polymer composite material with honeycomb filler. Technology of Metals. 2019;(7):27–31. (In Russ). doi: 10.31044/1684-2499-2019-7-0-27-31

[4] Косенко Е.А., Баурова Н.И., Зорин В.А. Снижение металлоемкости рабочего оборудования дорожных машин за счет использования полимерных композиционных материалов с сотовым заполнением // Технология металлов. 2019. № 7. С. 27–31. doi: 10.31044/1684-2499-2019-7-0-27-31

[5] Gafarov AA, Mudarisov SG, Farkhutdinov IM. Modelirovanie rabochikh organov pochvoobrabatyvayushchikh mashin i analiz ikh vzaimodeistviya s uchetom reologicheskikh svoistv pochvy. Traktory i sel'khozmashiny. 2009;(5):23–27. (In Russ).

[6] Гафаров А.А., Мударисов С.Г., Фархутдинов И.М. Моделирование рабочих органов почвообрабатывающих машин и анализ их взаимодействия с учетом реологических свойств почвы // Тракторы и сельхозмашины. 2009. № 5. С. 23–27.

[7] Smolyanitsky EA. Hydraulic excavators with a telescopic working equipment. Stroitel''nye i dorozhnye mashiny. 2017;(8):18–21. (In Russ).

[8] Смоляницкий Э.А. Одноковшовые гидравлические экскаваторы с телескопическим рабочим оборудованием // Строительные и дорожные машины. 2017. № 8. С. 18–21.

[9] Kozarez IV, Trepoukhov NM, Minenko VI, Sary ML. Metody povysheniya resursa dolot glubokorykhlitelei. Trudy inzhenerno-tekhnologicheskogo fakul'teta Bryanskogo gosudarstvennogo agrarnogo universiteta. 2021;(1):24–34. (In Russ).

[10] Козарез И.В., Трепоухов Н.М., Миненко В.И., Сары М.Л. Методы повышения ресурса долот глубокорыхлителей // Труды инженерно-технологического факультета Брянского государственного аграрного университета. 2021. № 1. С. 24–34.

[11] Mikhalchenkov AM, Kozarez IV, Dyachenko AV, Tyureva AA. Wearing and service life of agricultural machine blades restored by various technologies. Technology of Metals. 2021;(1):47–51. (In Russ). doi: 10.31044/1684-2499-2021-0-1-47-51

[12] Михальченков А.М., Козарез И.В., Дьяченко А.В., Тюрева А.А. Изнашивание и ресурс восстановленных по различным технологиям отвалов сельскохозяйственного назначения // Технология металлов. 2021. № 1. С. 47–51. doi: 10.31044/1684-2499-2021-0-1-47-51

[13] Vityunin MA, Chikova OA. Soprotivlenie materialov: uchebnoe posobie dlya studentov, obuchayushchikhsya po napravleniyu «Pedagogicheskoe obrazovanie» (profil' «Tekhnologiya»). Yekaterinburg: Ural'skii gosudarstvennyi pedagogicheskii universitet; 2014. (In Russ).

[14] Витюнин М.А., Чикова О.А. Сопротивление материалов: учебное пособие для студентов, обучающихся по направлению «Педагогическое образование» (профиль «Технология»). Екатеринбург: Уральский государственный педагогический университет, 2014.

RIGHTS & PERMISSIONS

Mikhalchenkov A.M., Komogortsev V.F., Kozarez I.V., Dyachenko A.V., Mikhalchenkova M.A.