The range of products manufactured by Johnson Controls and its scope is very wide. Devices of this company are used in refrigeration, air conditioning, ventilation and heating systems, as well as in various hydro-pneumatic systems.

Its application eliminates the effect of temperature effects from the oil separator on the alignment of the compressor and the electric motor.

In recent years, in many cities of Russia, artificial skating rinks have been built or are planned to be built indoors. Therefore, it is important to analyze and summarize both domestic and foreign experience in the construction of artificial ice rinks.

According to the results of the tender, the development of the ventilation and air conditioning system project, the supply of equipment, installation and commissioning in the new building was carried out by Electrostar CJSC.

JSC "Kholodmash" (Cherkessk), taking into account the further development trend in Russia of small businesses, farms, etc., has developed, tested and prepared for production single batches of MBB25-2-0 refrigeration freon aggregated machines to create and maintain storage temperatures products in relatively small stationary and collapsible chambers with a volume of 150 ... 350 m3 as part of quick-freezing systems and freezing lines.

ADAP-KOOL is an electronic control system for refrigeration equipment, consisting of software, a large number of different controllers and accessories

Bitner's new CS series of sealless screw refrigeration compressors, which began production about two years ago, consists of three models (CS 65, CS 75, CS 85) of eight basic models designed for use in medium and high temperature chillers.

In 1998, the Noginsk Cold Storage Plant purchased and installed four Alfa Laval semi-welded plate condensers with a heat load of 500 kW each. The devices pleasantly surprised the staff of the plant with their compactness in comparison with the evaporative condensers (EC), which were previously used at the cold store.