Flexible dual functional piezoelectric pyroelectric sensor for high temperature applications

Abstract

Prolonged operation of mechanical components under high-temperature environment severely affects their performance and service life. It is urgently needed a high-temperature resistance sensor to monitor local temperature changes in the component to enhance the safety. However, conventional sensors are difficult to simultaneously achieve excellent sensing performance and conformability at high-temperature environments for curved surfaces. Herein, a polyacrylonitrile (PAN)/zirconium acetate [Zr(OAc)₄]-based flexible and high-temperature-resistant piezo/pyroelectric bifunctional sensors are fabricated via heat treatment and typical package method. Incorporation of Zr(OAc)₄ reduced the cyclization temperature of PAN molecular chains and effectively enhanced both the mechanical properties and electrical output of the composite membranes sensor. Compared to pure PAN, the PAN/Zr(OAc)₄ composite nanofiber sensor (heat-treated at 450 °C) exhibits higher voltage output (~12.9 V) and piezoelectric sensitivity (~1.67 V/N) at room temperature. In addition, the sensor exhibits excellent pyroelectric output performance across a wide temperature gradient range, enabling accurate detection of engine temperature fluctuations. Remarkably, the sensor maintain stable piezoelectric and pyroelectric outputs after 5,000 press-release cycles at 400 °C, highlighting its robustness under extreme conditions. These results demonstrate that PAN/Zr(OAc)₄ sensor provides reliable, flexible, and multifunctional solutions for real-time temperature monitoring in automobile engines, offering substantial benefits for extending engine lifespan and ensuring driving safety.

Keywords

PAN/Zr(OAc)₄ composite nanofiber sensors / piezo/pyroelectric bifunctionality / high-temperature resistance / flexibility / temperature warning

References

[1] Liu Z,Jiang Z.Flexible temperature sensor with high sensitivity ranging from liquid nitrogen temperature to 1200 °C.Int J Extrem Manuf2023;5:015601

[2] Liu Y,Liu T.Triboelectric tactile sensor for pressure and temperature sensing in high-temperature applications.Nat Commun2025;16:383 PMCID:PMC11698958

[3] Li Y,Wen C,Luo Z.Rub-impact dynamic analysis of a dual-rotor system with bolted joint structure: theoretical and experimental investigations.Mech Syst Signal Process2024;209:111144

[4] Liu H,Lei S.In-service aircraft engines turbine blades life prediction based on multi-modal operation and maintenance data.Propuls Power Res2021;10:360-73

[5] Zhang X,Gao X.High-temperature and flexible piezoelectric sensors for lamb-wave-based structural health monitoring.ACS Appl Mater Interfaces2021;13:47764-72

[6] Chen S,Zhang C.Flexible piezoresistive three-dimensional force sensor based on interlocked structures.Sens Actuators A Phys2021;330:112857

[7] Xu C,Zhang J.Three-dimensional micro strain gauges as flexible, modular tactile sensors for versatile integration with micro- and macroelectronics.Sci Adv2024;10:eadp6094 PMCID:PMC11338218

[8] Khan B,Khan B.Next-generation piezoelectric materials in wearable and implantable devices for continuous physiological monitoring.Adv Sci2025;12:e07853 PMCID:PMC12591194

[9] Li M,Yaseen S.High performance piezoelectric nanogenerator based on aligned single crystal BaTiO₃ nanowires for self-powered applications.Chem Eng J2025;516:163834

[10] Kumar M,Kumari P.Piezoelectric performance enhancement of electrospun functionally graded PVDF/BaTiO₃ based flexible nanogenerators.Mater Res Bull2024;174:112739

[11] Yuan L,Yang X.Piezoelectric PAN/BaTiO₃ nanofiber membranes sensor for structural health monitoring of real-time damage detection in composite.Compos Commun2021;25:100680

[12] King D,Vinayak S.A gas ionization sensor with a novel pyroelectric lithium niobate crystal as a voltage source.Sens Actuators A Phys2025;389:116544

[13] Wang G,Gao X.Near stoichiometric lithium niobate crystal with dramatically enhanced piezoelectric performance for high-temperature acceleration sensing.J Mater Chem C2024;12:16357-66

[14] Dagdeviren C,Joe P.Conformable amplified lead zirconate titanate sensors with enhanced piezoelectric response for cutaneous pressure monitoring.Nat Commun2014;5:4496

[15] Yuan Y,Li N.Bottom electrode effects on piezoelectricity of Pb(Zr_0.52,Ti_0.48)O₃ thin film in flexible sensor applications.Materials2023;16:7470 PMCID:PMC10707225

[16] Sun Y,Li Q.Piezoelectric property of a tetragonal (Ba,Ca)(Zr,Ti)O₃ single crystal and its fine-domain structure.ACS Appl Mater Interfaces2018;10:12847-53

[17] Costa CM,Martins P.Smart and multifunctional materials based on electroactive poly(vinylidene fluoride): recent advances and opportunities in sensors, actuators, energy, environmental, and biomedical applications.Chem Rev2023;123:11392-487 PMCID:PMC10571047

[18] Peng R,Dong G.Enhanced piezoelectric energy harvester by employing freestanding single‐crystal BaTiO₃ films in PVDF‐TrFE based composites.Adv Funct Mater2024;34:2316519

[19] Zhang H,Qiu C.Polyaniline/ZnO heterostructure-based ammonia sensor self-powered by electrospinning of PTFE-PVDF/MXene piezo-tribo hybrid nanogenerator.Chem Eng J2024;496:154226

[20] Qian F,Cheng M.An overview of polylactic acid (PLA) nanocomposites for sensors.Adv Compos Hybrid Mater2024;7:75

[21] Li Z,Wu B.Interfacial-engineered robust and high performance flexible polylactic acid/polyaniline/MXene electrodes for high-perfarmance supercapacitors.J Mater Sci Technol2024;203:201-10

[22] Peng W,Zhang M,Li X.Biodegradable flexible conductive film based on sliver nanowires and PLA electrospun fibers.J Appl Polym Sci2024;141:e55433

[23] Zhao X,Wang X,Zhou W.Strong synergistic toughening and compatibilization enhancement of carbon nanotubes and multi-functional epoxy compatibilizer in high toughened polylactic acid (PLA)/poly (butylene adipate-co-terephthalate) (PBAT) blends.Int J Biol Macromol2023;250:126204

[24] Azimi B,Lazzeri A.Electrospinning piezoelectric fibers for biocompatible devices.Adv Healthc Mater2020;9:e1901287 PMCID:PMC6949425

[25] Lee HJ.Design of low-loss 1-3 piezoelectric composites for high-power transducer applications.IEEE Trans Ultrason Ferroelectr Freq Control2012;59:1969-75 PMCID:PMC3666951

[26] Jian G,Meng Q.Excellent high-temperature piezoelectric energy harvesting properties in flexible polyimide/3D PbTiO₃ flower composites.Nano Energy2021;82:105778

[27] Hyeon DY,Lee S.High-temperature workable flexible piezoelectric energy harvester comprising thermally stable (K,Na)NbO₃-based ceramic and polyimide composites.Compos Part B Eng2022;234:109671

[28] Zhang X,Shi X.Heteroepitaxy of flexible piezoelectric Pb(Zr_0.53Ti_0.47)O₃ sensor on inorganic mica substrate for lamb wave-based structural health monitoring.Ceram Int2021;47:13156-63

[29] Kaur G,Jassal M.ZnO-poly(acrylonitrile) composite films with improved piezoelectric properties for energy harvesting and sensing applications.Compos Sci Technol2023;243:110260

[30] Wang W,Sun Y.High-temperature piezoelectric conversion using thermally stabilized electrospun polyacrylonitrile membranes.J Mater Chem A2021;9:20395-404

[31] Klinar K,Franco V,Kitanovski A.Perspectives and energy applications of magnetocaloric, pyromagnetic, electrocaloric, and pyroelectric materials.Adv Energy Mater2024;14:2401739

[32] Yin R,Li W.High-temperature flexible electric Piezo/pyroelectric bifunctional sensor with excellent output performance based on thermal-cyclized electrospun PAN/Zn(Ac)₂ nanofiber mat.Nano Energy2024;124:109488

[33] Li Y,Liang K.Enhanced piezoelectric performance of multi-layered flexible polyvinylidene fluoride–BaTiO₃–rGO films for monitoring human body motions.J Mater Sci Mater Electron2022;33:4291-304

[34] Dang W,Wang X.Structural transformation of polyacrylonitrile (PAN) fibers during rapid thermal pretreatment in nitrogen atmosphere.Polymers2020;12:63 PMCID:PMC7023665

[35] Chao HW,Chen YR.Characterizing the dielectric properties of carbon fiber at different processing stages.Sci Rep2021;11:17475 PMCID:PMC8410780

[36] Zhang W,Shen Z,Wang X.Effect of diameter on the structural evolution and tensile properties of electrospun PAN-based carbon nanofiber mats.ACS Omega2023;8:19002-5 PMCID:PMC10233825

[37] Love-Baker CA,Vautard F,Li X.Analysis of the turbostratic structures in PAN-based carbon fibers with wide-angle x-ray diffraction.Carbon2024;224:119037

[38] Podder S,Mukherjee C,Jana S.Fabrication and characterization of sol–gel-based coatings on quartz glass to obtain antireflective effect at 1054 nm for optics of high power Nd:phosphate glass laser.Bull Mater Sci2022;45:2732

[39] Zeng J,Liu J,Guo S.Interaction between thermal stabilization temperature program, oxidation reaction, and mechanical properties of polyacrylonitrile (PAN) based carbon fibers.Diamond Relat Mater2024;141:110588

[40] Liu Y,Shang L.Study on the structural evolution of polyacrylonitrile fibers in stepwise heat treatment process and its relationship with properties.J Appl Polym Sci2022;139:52077

[41] Zhou H,Wang H.Tuning of structural/functional feature of carbon fibers: new insights into the stabilization of polyacrylonitrile.Polymer2023;282:126157

[42] He Z,Zhang S.Investigation of the cyclization mechanism of poly(acrylonitrile-co-ethylenesulfonic acid) copolymer during thermal oxidative stabilization by in situ infrared spectroscopy.Ind Eng Chem Res2020;59:9519-31

[43] Sun Y,Zheng Y.Enhanced energy harvesting ability of ZnO/PAN hybrid piezoelectric nanogenerators.ACS Appl Mater Interfaces2020;12:54936-45

[44] Jie L.Structural changes during the thermal stabilization of modified and original polyacrylonitrile precursors.J Appl Polym Sci2005;97:2047-53

[45] Ahn H,Lee BS.Designing materials and processes for strong polyacrylonitrile precursor fibers.Polymers2021;13:2863 PMCID:PMC8434603

[46] Zhang X,Nishijima A.Thermal transformation of polyacrylonitrile accelerated by the formation of ultrathin nanosheets in a metal-organic framework.ACS Macro Lett2023;12:415-20

[47] Zeng W,Shen Y.Conformational selection of polymer chains upon π-π interactions with small molecules.Phys Rev Lett2024;133:178101

[48] Konstantopoulos G,Dragatogiannis D.Introduction of a methodology to enhance the stabilization process of PAN fibers by modeling and advanced characterization.Materials2020;13:2749 PMCID:PMC7344712

[49] Wang C,Xin Z.Effect of monomethyl itaconate on thermal stabilization and rheological properties of narrow polydispersity polyacrylonitrile synthesized in continuous flow.Eur Polym J2024;210:112931

[50] Kissinger HE.Reaction kinetics in differential thermal analysis.Anal Chem1957;29:1702-6

[51] Valdez S.Understanding non-isothermal crystallization behaviors of polyethylene-derived vitrimers.Macromolecules2025;58:9348-57 PMCID:PMC12424294

[52] Tabbagh A,Jougnot D.Experimental and numerical analysis of dielectric polarization effects in near‐surface earth materials in the 100 Hz-10 MHz frequency range: first interpretation paths.Near Surf Geophys2024;22:468-81

[53] Li J,Xu Z.High-temperature-resistant dual-scale ceramic nanofiber films toward improved air filtration.ACS Appl Mater Interfaces2024;16:60608-15

[54] Pan F,Shi Y.Heterointerface engineering of β-chitin/carbon nano-onions/Ni-P composites with boosted Maxwell-Wagner-Sillars effect for highly efficient electromagnetic wave response and thermal management.Nanomicro Lett2022;14:85 PMCID:PMC8964898

[55] Liu L,Xu K.High piezoelectric property with exceptional stability in self-poled ferroelectric films.Nat Commun2024;15:10798 PMCID:PMC11685493

[56] Ye J,Wu X.Development and performance research of PSN-PZT piezoelectric ceramics based on road vibration energy harvesting technology.Mater Today Commun2023;34:105135

[57] Pan D.Lead zirconate titanate (PZT) piezoelectric ceramics: applications and prospects in human motion monitoring.Ceram Silik2024;68:444-58

[58] Kim N,Chen J.Piezoelectric pressure sensor based on flexible gallium nitride thin film for harsh-environment and high-temperature applications.Sens Actuators A Phys2020;305:111940

[59] Liu S L,Wu QF.Highly sensitive flexible high-temperature sensor based on ITO/In₂O₃ for underwater hot spring monitoring.Sci China Mater2025;68:4115-24

[60] He P,Zhang B.Mechanically robust porous polyimide films for piezoelectric sensing at extreme condition.Compos Sci Technol2025;261:111006