Objective: Ankylosing spondylitis (AS) often presents with spinal kyphosis, and pedicle subtraction osteotomy (PSO) is a common surgical technique for correcting AS-related kyphosis. However, after PSO, the posterior column lacks rigid bone support, potentially leading to intervertebral disc mobility and loss of correction. This study aims to introduce a novel 3D-printed laminae for the treatment of AS-related kyphosis.
Methods: This is a retrospective cohort study. A total of 48 patients receiving posterior correction surgeries between December 2021 and January 2022 were included and divided into two groups according to whether they accepted the 3D-printed laminae. We propose a novel approach using 3D-printed laminae to enhance posterior column stability and reduce deformity loss. Sixteen patients receiving 3D-printed laminae and 32 patients who did not receive that device. We collected preoperative and postoperative radiographic parameters, perioperative data, and patient-reported clinical scores. Statistical analysis involved independent sample t tests or randomization tests for continuous variables and chi-square tests for categorical variables.
Results: In the implanted group, kyphosis was corrected from 75.88° preoperatively to 27.06° postoperatively, and in the unimplanted group, from 70.98° to 28.42°. At the last follow-up, the ΔGK (global kyphosis) was 1.76° in the implanted group and 2.50° in the unimplanted group. PJA was 9.77° in the implanted group and 15.45° in the unimplanted group, showing significant differences. Two patients in the unimplanted group experienced sagittal reconstruction failure. Health-related quality of life (HRQoL) scores improved in the implanted group, with back pain scores of 2.63 and Oswestry Disability Index (ODI) scores of 13.50.
Conclusions: Our study introduces a novel 3D-printed laminae technique for AS-related kyphosis, aiding in maintaining sagittal balance. Patients reported improved subjective outcomes, including reduced pain and better HRQoL.
| [1] |
W. Zhang, W. Yin, X. Cui, et al., “Operative Strategies for Ankylosing Spondylitis-Related Thoracolumbar Kyphosis: Focus on the Cervical Stiffness, Coronal Imbalance and Hip Involvement,” BMC Musculoskeletal Disorders 24 (2023): 723, https://doi.org/10.1186/s12891-023-06810-2.
|
| [2] |
M. Tanios, B. Brickman, and J. Norris, “Spondyloarthropathies That Mimic Ankylosing Spondylitis: A Narrative Review,” Clinical Medicine Insights: Arthritis and Musculoskeletal Disorders 16 (2023): 11795441231186822, https://doi.org/10.1177/11795441231186822.
|
| [3] |
J. Luo, K. Yang, Z. Yang, et al., “Optimal Immediate Sagittal Alignment for Kyphosis in Ankylosing Spondylitis Following Corrective Osteotomy,” Frontiers in Surgery 9 (2022): 975026, https://doi.org/10.3389/fsurg.2022.975026.
|
| [4] |
Y. Yang, L. Huang, G. Zhao, et al., “Influence of Kyphosis in Ankylosing Spondylitis on Cardiopulmonary Functions,” Medicine (Baltimore) 102 (2023): e35592, https://doi.org/10.1097/md.0000000000035592.
|
| [5] |
Y. Wang, C. Xue, K. Song, et al., “Comparison of Loss of Correction Between PSO and VCD Technique in Treating Thoracolumbar Kyphosis Secondary to Ankylosing Spondylitis, a Minimum 2 Years Follow-Up,” Journal of Orthopaedic Surgery and Research 14 (2019): 137, https://doi.org/10.1186/s13018-019-1170-5.
|
| [6] |
Z. Xin, G. Zheng, P. Huang, X. Zhang, and Y. Wang, “Clinical Results and Surgery Tactics of Spinal Osteotomy for Ankylosing Spondylitis Kyphosis: Experience of 428 Patients,” Journal of Orthopaedic Surgery and Research 14 (2019): 330, https://doi.org/10.1186/s13018-019-1371-y.
|
| [7] |
S. Charosky, P. Moreno, and P. Maxy, “Instability and Instrumentation Failures After a PSO: A Finite Element Analysis,” European Spine Journal 23 (2014): 2340-2349, https://doi.org/10.1007/s00586-014-3295-x.
|
| [8] |
L. La Barbera, H.-J. Wilke, and M. L. Ruspi, “Load-Sharing Biomechanics of Lumbar Fixation and Fusion With Pedicle Subtraction Osteotomy,” Scientific Reports 11 (2021): 3595, https://doi.org/10.1038/s41598-021-83,251-8.
|
| [9] |
Y. Li, J. Lin, Y. Wang, et al., “Comparative Study of 3D Printed Navigation Template-Assisted Atlantoaxial Pedicle Screws Versus Free-Hand Screws for Type II Odontoid Fractures,” European Spine Journal 30 (2021): 498-506, https://doi.org/10.1007/s00586-020-06644-9.
|
| [10] |
H. Zhou, S. Liu, Z. Li, et al., “3D-Printed Vertebral Body for Anterior Spinal Reconstruction in Patients With Thoracolumbar Spinal Tumors,” Journal of Neurosurgery. Spine 37 (2022): 274-282, https://doi.org/10.3171/2022.1.Spine21900.
|
| [11] |
Y. Wang, G. Q. Zheng, Y. G. Zhang, et al., “Proposal of a New Treatment-Oriented Classification System for Spinal Deformity in Ankylosing Spondylitis,” Spine Deformity 6 (2018): 366-372, https://doi.org/10.1016/j.jspd.2017.06.001.
|
| [12] |
D. S. Marks and S. A. Qaimkhani, “The Natural History of Congenital Scoliosis and Kyphosis,” Spine (Phila Pa 1976) 34 (2009): 1751-1755, https://doi.org/10.1097/BRS.0b013e3181af1caf.
|
| [13] |
C. Liu, R. Ge, H. Li, Z. Zhu, W. Xia, and H. Liu, “Thoracolumbar/Lumbar Degenerative Kyphosis-The Importance of Thoracolumbar Junction in Sagittal Alignment and Balance,” Journal of Personalized Medicine 14 (2023): 36, https://doi.org/10.3390/jpm14010036.
|
| [14] |
K. Khanna and S. Sabharwal, “Spinal Tuberculosis: A Comprehensive Review for the Modern Spine Surgeon,” Spine Journal 19 (2019): 1858-1870, https://doi.org/10.1016/j.spinee.2019.05.002.
|
| [15] |
C. Yang, Z. Zeng, H. Yan, et al., “Application of Vertebral Body Compression Osteotomy in Pedicle Subtraction Osteotomy on Ankylosing Spondylitis Kyphosis: Finite Element Analysis and Retrospective Study,” Frontiers in Endocrinology 14 (2023): 1131880, https://doi.org/10.3389/fendo.2023.1131880.
|
| [16] |
Z. M. Sardar, R. J. Ames, and L. Lenke, “Scheuermann's Kyphosis: Diagnosis, Management, and Selecting Fusion Levels,” Journal of the American Academy of Orthopaedic Surgeons 27 (2019): e462-e472, https://doi.org/10.5435/jaaos-d-17-00748.
|
| [17] |
M. A. Bohl, J. J. Zhou, M. A. Mooney, et al., “The Barrow Biomimetic Spine: Effect of a 3-Dimensional-Printed Spinal Osteotomy Model on Performance of Spinal Osteotomies by Medical Students and Interns,” Journal of Spine Surgery 5 (2019): 58-65, https://doi.org/10.21037/jss.2019.01.05.
|
| [18] |
M. Qiao, B. P. Qian, S. H. Mao, Y. Qiu, and B. Wang, “The Patterns of Loss of Correction After Posterior Wedge Osteotomy in Ankylosing Spondylitis-Related Thoracolumbar Kyphosis: A Minimum of Five-Year Follow-Up,” BMC Musculoskeletal Disorders 18 (2017): 465, https://doi.org/10.1186/s12891-017-1834-4.
|
| [19] |
Z. Zhu, X. Wang, B. Qian, et al., “Loss of Correction in the Treatment of Thoracolumbar Kyphosis Secondary to Ankylosing Spondylitis: A Comparison Between Smith-Petersen Osteotomies and Pedicle Subtraction Osteotomy,” Journal of Spinal Disorders & Techniques 25 (2012): 383-390, https://doi.org/10.1097/BSD.0b013e318224b199.
|
| [20] |
K. J. Cho, K. T. Kim, W. J. Kim, et al., “Pedicle Subtraction Osteotomy in Elderly Patients With Degenerative Sagittal Imbalance,” Spine 38 (2013): E1561-E1566, https://doi.org/10.1097/BRS.0b013e3182a63c29.
|
| [21] |
M. Mirkhalaf, Y. Men, R. Wang, Y. No, and H. Zreiqat, “Personalized 3D Printed Bone Scaffolds: A Review,” Acta Biomaterialia 156 (2023): 110-124, https://doi.org/10.1016/j.actbio.2022.04.014.
|
| [22] |
J. Shen, M. Yang, N. Zhong, J. Jiao, and J. Xiao, “3D-Printed Titanium Prosthetic Reconstruction of Unilateral Bone Deficiency After Surgical Resection of Tumor Lesions in the Upper Cervical Spine: Clinical Outcomes of Three Consecutive Cases and Narrative Review,” Clinical Spine Surgery 36 (2023): 256-264, https://doi.org/10.1097/bsd.0000000000001469.
|
| [23] |
N. Wallace, N. E. Schaffer, I. S. Aleem, and R. Patel, “3D-Printed Patient-Specific Spine Implants: A Systematic Review,” Clinical Spine Surgery 33 (2020): 400-407, https://doi.org/10.1097/bsd.0000000000001026.
|
| [24] |
X. B. Zhang, X. D. Gao, D. J. Hao, T. Li, and Z. W. Xu, “Bioprinting for Bone Tissue Engineering,” Frontiers in Bioengineering and Biotechnology 10 (2022): 1036375, https://doi.org/10.3389/fbioe.2022.1036375.
|
RIGHTS & PERMISSIONS
2025 The Author(s). Orthopaedic Surgery published by Tianjin Hospital and John Wiley & Sons Australia, Ltd.
PDF
