Effect of Ti-Mo-V composite addition on microstructure and mechanical properties of marine 10Ni5CrMoV steel

Abstract

The effects of Ti-Mo-V composite addition on the evolution of precipitates in marine 10Ni5CrMoV steel and the corresponding strength and toughness mechanisms were systematically investigated. Ti-Mo-V composite addition can form the Ti_xMo_yV_zC carbide with TiC as core and Mo-V as shell in the order of Ti(C)→V→Mo. The yield strength of the specimens is increased from 815 MPa to 876 MPa due to the nanoscale precipitates enhancing the pinning effect on grain boundaries and dislocations, and the contribution of precipitation and dislocation strengthening is increased. The decrease of ductile-brittle transition temperature from −103 to −116 °C is attributed to the decrease in equivalent grain size and the increase of high-angle grain boundary misorientation, which hinders the initiation and propagation of cracks. When the mass fraction of Ti is 0.05%, the strength and cryogenic toughness can be improved synergistically, which also provides a theoretical basis and experimental reference for exploring the more excellent combination of strength and cryogenic toughness of marine 10Ni5CrMoV steel.

Keywords

10Ni5CrMoV steel / Ti-Mo-V composition addition / ductile-brittle transition temperature / Ti_xMo_yVzC / mechanical properties

References

[1] LinQ-q, WangZ-z, DongW-z, et al. . Thermal-mechanical and springback behavior of dual-phase steel at warm temperatures [J]. Journal of Central South University, 2022, 29(6): 1895-1905

[2] JainD, IsheimD, HunterA H, et al. . Multicomponent high-strength low-alloy steel precipitation-strengthened by sub-nanometric Cu precipitates and M₂C carbides [J]. Metallurgical and Materials Transactions A, 2016, 47(8): 3860-3872

[3] KostryzhevA G, MarenychO O, KillmoreC R, et al. . Strengthening mechanisms in thermomechanically processed NbTi-microalloyed steel [J]. Metallurgical and Materials Transactions A, 2015, 46(8): 3470-3480

[4] ZhuZ-m, YuH, WangK, et al. . Quantitative analysis of precipitation and strengthening mechanisms of V and V-Ti hot-rolled microalloyed steels [J]. Journal of Materials Science, 2022, 57(7): 4806-4819

[5] SunY-z, LinN, ZhangW-j, et al. . Microstructure and properties of Al-doped ODS steels prepared by wet-milling and SPS methods [J]. Journal of Central South University, 2021, 28(4): 1219-1232

[6] ZhangY J, MiyamotoG, ShinboK, et al. . Weak influence of ferrite growth rate and strong influence of driving force on dispersion of VC interphase precipitation in low carbon steels [J]. Acta Materialia, 2020, 186: 533-544

[7] WangZ-q, ZhangH, GuoC-h, et al. . Effect of molybdenum addition on the precipitation of carbides in the austenite matrix of titanium micro-alloyed steels [J]. Journal of Materials Science, 2016, 51(10): 4996-5007

[8] MondiereA, DéneuxV, BinotN, et al. . Controlling the MC and M₂C carbide precipitation in Ferrium® M54® steel to achieve optimum ultimate tensile strength/fracture toughness balance [J]. Materials Characterization, 2018, 140: 103-112

[9] FunakawaY, ShiozakiT, TomitaK, et al. . Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides [J]. ISIJ International, 2004, 44(11): 1945-1951

[10] BuF Z, WangX M, YangS W, et al. . Contribution of interphase precipitation on yield strength in thermomechanically simulated Ti-Nb and Ti-Nb-Mo microalloyed steels [J]. Materials Science and Engineering A, 2015, 620: 22-29

[11] ZhangZ-y, SunX-j, LiZ-d, et al. . Effect of nanometer-sized carbides and grain boundary density on performance of Fe-C-Mo-M(M=Nb, V or Ti) fire resistant steels [J]. Chinese Journal of Materials Research, 2015, 29(4): 269-276

[12] LiY-z, LiuS-f, ZhangG-x, et al. . Effects of sintering temperature and holding time on microstructure and mechanical properties of Ti-1Al-8V-5Fe prepared by spark plasma sintering [J]. Journal of Central South University, 2021, 28(4): 1183-1194

[13] TakebayashiS, KuniedaT, YoshinagaN, et al. . Comparison of the dislocation density in martensitic steels evaluated by some X-ray diffraction methods [J]. ISIJ International, 2010, 50(6): 875-882

[14] AufrechtJ, LeineweberA, FoctJ, et al. . The structure of nitrogen-supersaturated ferrite produced by ball milling [J]. Philosophical Magazine, 2008, 88(12): 1835-1855

[15] WangW, MaoX-d, LiuS-j, et al. . Microstructure evolution and toughness degeneration of 9Cr martensitic steel after aging at 550 °C for 20000 h [J]. Journal of Materials Science, 2018, 53(6): 4574-4581

[16] WanQ-m, WangR-s, ShuG-g, et al. . Analysis method of Charpy V-notch impact data before and after electron beam welding reconstitution [J]. Nuclear Engineering and Design, 2011, 241(2): 459-463

[17] XieX, HeW-p, LiG-m, et al. . Crack deflection in the nonlinear zone of ultra-high-strength steel fatigue crack growth curve [J]. Materials Science and Technology, 2019, 35(13): 1600-1604

[18] XieX, YiH, XuJ, et al. . Effect of load ratio and saltwater corrosive environment on the initiation life of fatigue of 10Ni5CrMoV steel [J]. IOP Conference Series: Materials Science and Engineering, 2017, 231: 012141

[19] YangX, LiaoB, XiaoF-r, et al. . Ripening behavior of M₂₃C₆ carbides in P92 steel during aging at 800 ° [J]. Journal of Iron and Steel Research, International, 2017, 24(8): 858-864

[20] DongJ, ZhouX-s, LiuY-c, et al. . Carbide precipitation in Nb-V-Ti microalloyed ultra-high strength steel during tempering [J]. Materials Science and Engineering A, 2017, 683: 215-226

[21] LiuH-h, FuP-x, LiuH-w, et al. . Microstructure evolution and mechanical properties in 718H pre-hardened mold steel during tempering [J]. Materials Science and Engineering A, 2018, 709: 181-192

[22] ZhaoW, ZhouH-w, FangL-w, et al. . Study on diversified carbide precipitation in high-strength low-alloy steel during tempering [J]. Steel Research International, 2021, 92(7): 2000723

[23] HutchinsonB, HagströmJ, KarlssonO, et al. . Microstructures and hardness of as-quenched martensites (0.1–0.5%C) [J]. Acta Materialia, 2011, 59(14): 5845-5858

[24] ChristienF, TellingM T F, KnightK S. Neutron diffraction in situ monitoring of the dislocation density during martensitic transformation in a stainless steel [J]. Scripta Materialia, 2013, 68(7): 506-509

[25] ZhangY-w, ZhongY-g, LvC-t, et al. . Effect of carbon partition in the reverted austenite of supermartensitic stainless steel [J]. Materials Research Express, 2019, 6(8): 086518

[26] ZaitsevA, ArutyunyanN. Low-carbon Ti-Mo microalloyed hot rolled steels: Special features of the formation of the structural state and mechanical properties [J]. Metals, 2021, 11(10): 1584

[27] ZhangK, YongQ-l, SunX-j, et al. . Effect of coiling temperature on the structural and mechanical properties of Ti-V-Mo composite microalloyed ultra - high strength steels [J]. Acta Metallurgica Sinica (English Letter), 2016, 52(5): 529-537

[28] GanX-l, YangG-w, ZhaoG, et al. . Effect of vanadium on the phase transformation behavior of Ti-Mo microalloyed ultra-high strength steel [J]. Steel Research International, 2018, 89(9): 1800112

[29] ZhangK, LiZ-d, SunX-j, et al. . Development of Ti-V-Mo complex microalloyed hot-rolled 900-MPa-grade high-strength steel [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(5): 641-648

[30] ChenC Y, ChenC C, YangJ R. Microstructure characterization of nanometer carbides heterogeneous precipitation in Ti-Nb and Ti-Nb-Mo steel [J]. Materials Characterization, 2014, 88: 69-79

[31] YongQ-long. Secondary phases in steels [M], 2006 Beijing Metallurgical Industry Press 145 (in Chinese)

[32] HanR-y, YangG-w, XuD-m, et al. . Effect of V on the precipitation behavior of Ti-Mo microalloyed high-strength steel [J]. Materials, 2022, 15(17): 5965

[33] WangZ-q, YongQ-l, SunX-j, et al. . An analytical model for the kinetics of strain-induced precipitation in titanium micro-alloyed steels [J]. ISIJ International, 2012, 52(9): 1661-1669

[34] SeolJ B, NaS H, GaultB, et al. . Core-shell nanoparticle arrays double the strength of steel [J]. Scientific Reports, 2017, 7: 42547

[35] EbrahimiF, BourneG R, KellyM S, et al. . Mechanical properties of nanocrystalline nickel produced by electrodeposition [J]. Nanostructured Materials, 1999, 11(3): 343-350

[36] SeokM Y, ChoiI C, MoonJ, et al. . Estimation of the Hall-Petch strengthening coefficient of steels through nanoindentation [J]. Scripta Materialia, 2014, 87: 49-52

[37] KimB, BoucardE, SourmailT, et al. . The influence of silicon in tempered martensite: Understanding the microstructure-properties relationship in 0.5 - 0.6wt.% C steels [J]. Acta Materialia, 2014, 68: 169-178

[38] KamikawaN, SatoK, MiyamotoG, et al. . Stress - strain behavior of ferrite and bainite with nano-precipitation in low carbon steels [J]. Acta Materialia, 2015, 83: 383-396

[39] WangJ, LiW, ZhuX-d, et al. . Effect of martensite morphology and volume fraction on the low-temperature impact toughness of dual-phase steels [J]. Materials Science and Engineering A, 2022, 832: 142424

[40] WuB B, WangZ Q, WangX L, et al. . Toughening of martensite matrix in high strength low alloy steel: Regulation of variant pairs [J]. Materials Science and Engineering A, 2019, 759: 430-436

[41] ZhangS-w, WangY-d, ZhuM-h, et al. . Relationships among Charpy impact toughness, microstructure and fracture behavior in 10CrNi3MoV steel weld joint [J]. Materials Letters, 2020, 281: 128328

[42] AndersonT L. Fracture mechanics: Fundamentals and applications [M], 2017 Boca Raton CRC Press

RIGHTS & PERMISSIONS

Central South University