Numerical study of directional heat transfer in composite materials via controllable carbon fiber distribution

Abstract

Carbon fiber reinforced polyamide 12 (CF/PA12), a new material renowned for its excellent mechanical and thermal properties, has drawn significant industry attention. Using the steady-state research to heat transfer, a series of simulations to investigate the heat transfer properties of CF/PA12 were conducted in this study. Firstly, by building two- and three-dimensional models, the effects of the porosity, carbon fiber content, and arrangement on the heat transfer of CF/PA12 were examined. A validation of the simulation model was carried out and the findings were consistent with those of the experiment. Then, the simulation results using the above models showed that within the volume fraction from 0% to 28%, the thermal conductivity of CF/PA12 increased greatly from 0.0242 W/(m·K) to 10.8848 W/(m·K). The increasing porosity had little influence on heat transfer characteristic of CF/PA12. The direction of the carbon fiber arrangement affects the heat transfer impact, and optimal outcomes were achieved when the heat flow direction was parallel to the carbon fiber. This research contributes to improving the production methods and broadening the application scenarios of composite materials.

Keywords

heat transfer / thermal conductivity / carbon fiber-based composite

References

[1] ShiL, ZhangS, ArshadA, et al. . Thermo-physical properties prediction of carbon-based magnetic nanofluids based on an artificial neural network. Renewable and Sustainable Energy Reviews, 2021, 149: 111341 J]

[2] SarfrazM, KhanM. Thermodynamic irreversibility analysis of water conveying argentum and titania nanoparticles subject to inclined stretching surface. Physica Scripta, 2023, 98(2): 025205 J]

[3] HayatT, MuhammadK, AlsaediA. Numerical study of melting heat transfer in stagnation-point flow of hybrid nanomaterial (MWCNTs+Ag+kerosene oil). International Journal of Numerical Methods for Heat & Fluid Flow, 2021, 312580-2598 J]

[4] OuJ-k, ZhangH-w, LeiY, et al. . Buckwheat core derived nitrogen- and oxygen-rich controlled porous carbon for high-performance supercapacitors. Journal of Central South University, 2023, 30(2): 419-433 J]

[5] TangY-l, ZhaoX-g, LiD-k, et al. . Nanoporous carbon-enabled composite phase change materials with high photo-thermal conversion performance for multifunction coating. Solar Energy Materials and Solar Cells, 2022, 248112025 J]

[6] XuJ, ZhangY-q, ZhuX-b, et al. . Boosting catalytic activities of carbon felt electrode towards redox reactions of vanadium ions by defect engineering. Journal of Central South University, 2022, 29(9): 2956-2967 J]

[7] HayatT, UllahI, MuhammadK, et al. . Gyrotactic microorganism and bio-convection during flow of Prandtl-Eyring nanomaterial. Nonlinear Engineering, 2021, 10(1): 201-212 J]

[8] ShiL, HuY-w, FengD-l, et al. . Magnetically-accelerated photo-thermal conversion and energy storage based on bionic porous nanoparticles. Solar Energy Materials and Solar Cells, 2020, 217110681 J]

[9] ZhangX-g, LiY-q, LuoC-h, et al. . Fabrication and properties of novel tubular carbon fiber-ionic liquids/stearic acid composite PCMs. Renewable Energy, 2021, 177411-421 J]

[10] WuD-l, YaoZ-q, SunX-y, et al. . Mussel-tailored carbon fiber/carbon nanotubes interface for elevated interfacial properties of carbon fiber/epoxy composites. Chemical Engineering Journal, 2022, 429: 132449 J]

[11] GyunK S, JeongH S, SungyongK, et al. . Ultrahigh strength and modulus of polyimide-carbon nanotube based carbon and graphitic fibers with superior electrical and thermal conductivities for advanced composite applications. Composites Part B, 2022, 247110342 J]

[12] LuoK, ChenL, LiangWei. Structural health monitoring of carbon fiber reinforced polymer composite laminates for offshore wind turbine blades based on dual maximum correlation coefficient method. Renewable Energy, 2022, 2011163-1175 J]

[13] XiX, ChungD D L. Electret behavior of carbon fiber structural composites with carbon and polymer matrices, and its application in self-sensing and self-powering. Carbon, 2020, 160: 361-389 J]

[14] MahnoorS, MasoodK, MuhammadY. Dynamics of water conveying iron oxide and graphene nanoparticles subject to stretching/spiraling surface: An asymptotic approach. Ain Shams Engineering Journal, 2023, 14: 102021 J]

[15] WuX-t, ZhanL-h, HuangM-h, et al. . Corrosion damage evolution and mechanical properties of carbon fiber reinforced aluminum laminate. Journal of Central South University, 2021, 28(3): 657-668 J]

[16] LiC-g, GuoL, LeiY-c, et al. . A signal segmentation method for CFRP/CFRP stacks drilling-countersinking monitoring. Mechanical Systems and Signal Processing, 2023, 196110332 J]

[17] RajasekaranT, PalanikumarK, LathaB. Investigation and analysis of surface roughness in machining carbon fiber reinforced polymer composites using artificial intelligence techniques. Carbon Letters, 2022, 32(2): 615-627 J]

[18] LiuD-q, XuG-p, SongS-s, et al. . Fiber-shaped dynamic thermal radiation-regulated device based on carbon fiber and polyaniline. Solar Energy Materials and Solar Cells, 2022, 245111855 J]

[19] ForintosN, CziganyT. Multifunctional application of carbon fiber reinforced polymer composites: Electrical properties of the reinforcing carbon fibers - A short review. Composites Part B: Engineering, 2019, 162331-343 J]

[20] OlusanmiA, CongW-l, EricB, et al. . Environmental affected mechanical performance of additively manufactured carbon fiber-reinforced plastic composites. Journal of Composite Materials, 2022, 56(7): 1139-1150 J]

[21] Vivovilches JoseF, ÁlvaroV, CarmenT, et al. . Layer shape LiFePO₄ obtained by powder extrusion molding as solid boosters for Ferro/ferricyanide catholyte in semisolid redox flow battery: Effect of porosity and shape. Batteries & Supercaps, 2022, 5(7): e202200050 J]

[22] ZhouY, RaghuS N V, KumarV, et al. . Simulated lightning strike investigation of CFRP comprising a novel polyaniline/phenol based electrically conductive resin matrix. Composites Science and Technology, 2021, 214: 108971 J]

[23] XiongY, TangY-l, KimS, et al. . Human-machine collaborative additive manufacturing. Journal of Manufacturing Systems, 2023, 6682-91 J]

[24] GhachemK, KolsiL, LarguechS, et al. . Heat and mass transfer enhancement in triangular pyramid solar still using CNT-water nanofluid. Journal of Central South University, 2021, 28(11): 3434-3448 J]

[25] HayatT, MuhammadK, MomaniS. Melting heat and viscous dissipation in flow of hybrid nanomaterial: A numerical study via finite difference method. Journal of Thermal Analysis and Calorimetry, 2022, 147(11): 6393-6401 J]

[26] AlbaqawyG, MesloubA, KolsiL. CFD investigation of effect of nanofluid filled Trombe wall on 3D convective heat transfer. Journal of Central South University, 2021, 28(11): 3569-3579 J]

[27] LiJ-g, ZhangR, YangP-h, et al. . Optical investigations on lean combustion improvement of natural gas engines via turbulence enhancement. Journal of Central South University, 2022, 29(7): 2225-2238 J]

[28] KhanR, AhmadA, AfrazM, et al. . Flow and heat transfer analysis of polymeric fluid in the presence of nanoparticles and microorganisms. Journal of Central South University, 2023, 30(4): 1246-1261 J]

[29] LuC-x, WuQ-m, WangH-f, et al. . Microstructure, magnetic properties and enhanced thermal conductivity in La(Fe, Co, Si)₁₃/Nb magnetocaloric composites. Journal of Alloys and Compounds, 2021, 872159553 J]

[30] XuM, HerrmannJ W, DroguettE L. Modeling dependent series systems with q-Weibull distribution and Clayton copula. Applied Mathematical Modelling, 2021, 94117-138 J]

[31] BaoY-j, WangY-q, GaoH, et al. . Investigation on temperature field of unidirectional carbon fiber/epoxy composites during drilling process. Journal of Central South University, 2019, 26(10): 2717-2728 J]

[32] ZhaoY, ZhangZ-g, CaiC-y, et al. . Vertically aligned carbon fibers-penetrated phase change thermal interface materials with high thermal conductivity for chip heat dissipation. Applied Thermal Engineering, 2023, 230120807 J]

[33] WangP, ZhangZ, HaoB, et al. . Investigation on heat transfer and ablation mechanism of CFRP by different laser scanning directions. Composites Part B: Engineering, 2023, 262110827 J]

[34] HayatT, MuhammadK, AlsaediA, et al. . Features of Darcy-Forchheimer flow of carbon nanofluid in frame of chemical species with numerical significance. Journal of Central South University, 2019, 26(5): 1260-1270 J]

[35] WenS, LiuS-c, ShiL, et al. . Photo-thermal conversion and Joule heat characteristics of thermal switch via carbon fiber-based composite. Journal of Central South University, 2023, 30(7): 2081-2093 J]

[36] ShiL, TaoW-l, HuangC-w, et al. . Magnetic-field tuning of thermal conductivity via bionic nanochain and droplet deformation. International Communications in Heat and Mass Transfer, 2023, 144106745 J]

[37] AbbasS, ParkC W. Frosting and defrosting assessment of carbon fiber reinforced polymer composite with surface wettability and resistive heating characteristics. International Journal of Heat and Mass Transfer, 2021, 169120883 J]

[38] LiJ, ZhaiH, ShiL, et al. . Experimental analysis of convective boiling heat transfer and nanoparticle deposition effect of TiO₂-H₂O nanofluids in microchannels. Thermal Science and Engineering Progress, 2024, 47102282 J]