Construction of dicyandiamide-coated manganese dioxide composite and its mechanism for improving zinc storage performance

Abstract

Manganese dioxide (MnO₂) is considered one of the most promising cathode materials for aqueous zinc-ion batteries because of its high theoretical capacity, high working voltage, and environmental friendliness. However, its severe capacity fading is caused by unstable crystal structure and manganese dissolution during discharge. Based on these reasons, dicyandiamide (DCDA) was used to coat α-MnO₂ and the effect mechanism of DCDA on the electrochemical performance of α-MnO₂@DCDA was systematically investigated. The results indicate that the physical confinement function of the DCDA not only improves significantly the structural stability of α-MnO₂ but also inhibits dissolution of manganese during discharge. More importantly, electrostatic interaction between nitrogen atoms in DCDA and cations in electrolyte can inhibit Mn²⁺ dissolution during discharge and promote Mn²⁺ deposition during charging, effectively inhibiting the loss of manganese active material. Compared with unmodified α-MnO₂ cathodes, α-MnO₂@DCDA cathodes exhibit significantly improved cycling stability, with a stable capacity of 102.6 mA·h/g after 1500 cycles at a high current density of 3 A/g, with a capacity retention rate exceeding 60%. This work provides an effective way to achieve stable cycling of MnO₂-based zinc-ion batteries.

Keywords

water-based zinc-ion batteries / α-MnO₂ cathode / nitrogen-containing functional groups

References

[[1]] Tang H, Chen W-h, Li N, et al.. Layered MnO₂ nanodots as high-rate and stable cathode materials for aqueous zinc-ion storage. Energy Storage Materials, 2022, 48: 335-343, J]

[[2]] Zhang N, Wang J-c, Guo Y-f, et al.. Insights on rational design and energy storage mechanism of Mn-based cathode materials towards high performance aqueous zinc-ion batteries. Coordination Chemistry Reviews, 2023, 479: 215009, J]

[[3]] Wang D-h, Wang L-f, Liang G-j, et al.. A superior δ-MnO₂ cathode and a self-healing Zn-δ-MnO₂ battery. ACS Nano, 2019, 13(9): 10643-10652, J]

[[4]] Huang J-h, Wang Z, Hou M-y, et al.. Polyaniline-intercalated manganese dioxide nanolayers as a high-performance cathode material for an aqueous zinc-ion battery. Nature Communications, 2018, 9: 2906, J]

[[5]] Pan H-l, Shao Y-y, Yan P-f, et al.. Reversible aqueous zinc/manganese oxide energy storage from conversion reactions. Nature Energy, 2016, 1(5): 16039, J]

[[6]] Chamoun M, Brant W R, Tai C W, et al.. Rechargeability of aqueous sulfate Zn/MnO₂ batteries enhanced by accessible Mn²⁺ ions. Energy Storage Materials, 2018, 15: 351-360, J]

[[7]] Gou L, Xue D, Mou K-l, et al.. α-MnO₂@In₂O₃ Nanotubes as cathode material for aqueous rechargeable Zn-ion battery with high electrochemical performance. Journal of the Electrochemical Society, 2019, 166(14): A3362-A3368, J]

[[8]] Cao X-w, Xu Y-t, Yang B, et al.. In-situ Co-precipitated α-MnO₂@2-methylimidazole cathode material for high performance zinc ion batteries. Journal of Alloys and Compounds, 2022, 896: 162785, J]

[[9]] Wu B-k, Zhang G-b, Yan M-y, et al.. Graphene scroll-coated α-MnO₂ nanowires as highperformance cathode materials for aqueous Zn-ion battery. Small, 2018, 14(13): e1703850, J]

[[10]] Wang B, Zeng Y, Chen P, et al.. Mechanical insights into the electrochemical properties of thornlike micro-/ nanostructures of PDA@MnO₂@NMC composites in aqueous Zn ion batteries. ACS Applied Materials & Interfaces, 2022, 14(31): 36079-36091, J]

[[11]] Liu W-f, Liu P-g, Hao R, et al.. One-dimensional MnO₂ nanowires space-confined in hollow mesoporous carbon nanotubes for enhanced Zn²⁺ storage performance. ChemElectroChem, 2020, 7(5): 1166-1171, J]

[[12]] Gao S-y, Li B-m, Lu K, et al.. Modulating MnO₂ interface with flexible and self-adhering alkylphosphonic layers for high-performance Zn-MnO₂ batteries. ACS Applied Materials & Interfaces, 2021, 13(20): 23724-23731, J]

[[13]] Dai L-x, Wang Y, Sun L, et al.. Jahn-teller distortion induced Mn²⁺-rich cathode enables optimal flexible aqueous high-voltage Zn-Mn batteries. Advanced Science, 2021, 8(12): 2004995, J]

[[14]] Liu Y-z, Qin Z-m, Yang X-p, et al.. A long-life manganese oxide cathode material for aqueous zinc batteries with a negatively charged porous host to promote the back-deposition of dissolved Mn²⁺. Advanced Functional Materials, 2022, 32(10): 2106994, J]

[[15]] Wang J-j, Wang J-g, Liu H-y, et al.. A highly flexible and lightweight MnO₂/graphene membrane for superior zinc-ion batteries. Advanced Functional Materials, 2021, 31(7): 2007397, J]

[[16]] Braun U, Brademann-jock K, Stark W. Cure monitoring of epoxy films by heatable in situ FTIR analysis: Correlation to composite parts. Journal of Applied Polymer Science, 2014, 131(3): e39832, J]

[[17]] Gundjian M, Cole K C. Effect of copper on the curing and structure of a DICY-containing epoxy composite system. Journal of Applied Polymer Science, 2000, 75(12): 1458-1473, J]

[[18]] Liu D-s, Mai Y-l, Chen S-f, et al.. A 1D-3D interconnected δ-MnO₂ nanowires network as high-performance and high energy efficiency cathode material for aqueous zinc-ion batteries. Electrochimica Acta, 2021, 370: 137740, J]

[[19]] Graf N, Yegen E, Gross T, et al.. XPS and NEXAFS studies of aliphatic and aromatic amine species on functionalized surfaces. Surface Science, 2009, 603(18): 2849-2860, J]

[[20]] Säckl G, Duchoslav J, Pugstaller R, et al.. The interaction of waterborne epoxy/dicyandiamide varnishes with metal oxides. Polymers, 2022, 14(11): 2226, J]

[[21]] Zhao Q, Huang X-j, Zhou M-m, et al.. Proton insertion promoted a polyfurfural/MnO₂ nanocomposite cathode for a rechargeable aqueous Zn-MnO₂ battery. ACS Applied Materials & Interfaces, 2020, 12(32): 36072-36081, J]

[[22]] Ye F, Liu Q, Lu C-j, et al.. Inorganic manganese oxide/quinone coupling for high-capacity aqueous Zn-ion battery. Energy Storage Materials, 2022, 52: 675-684, J]

[[23]] Li J-w, Luo N-j, Kang L-q, et al.. Hydrogen-bond reinforced superstructural manganese oxide As the cathode for ultra-stable aqueous zinc ion batteries. Advanced Energy Materials, 2022, 12(44): 2201840, J]

[[24]] Liu Y, Zhi J, Sedighi M, et al.. Mn²⁺ ions confined by electrode microskin for aqueous battery beyond intercalation capacity. Advanced Energy Materials, 2020, 10(42): 2002578, J]

[[25]] Becknell N, Lopes P P, Hatsukade T, et al.. Employing the dynamics of the electrochemical interface in aqueous zinc-ion battery cathodes. Advanced Functional Materials, 2021, 31(35): 2102135, J]

[[27]] Sun G-c, Yang B-z, Chen X-j, et al.. Aqueous zinc batteries using N-containing organic cathodes with Zn²⁺ and H⁺ Co-uptake. Chemical Engineering Journal, 2022, 431: 134253, J]

[[28]] Xu S-k, Li Z-q, Chu K-n, et al.. Construction of NiS nanosheets anchored on the inner surface of nitrogen-doped hollow carbon matrixes with enhanced sodium and potassium storage performances. ACS Applied Energy Materials, 2021, 4(1): 662-670, J]

[[29]] Ding G-h, Li Z-q, Wei L-z, et al.. Regulating the sodium storage sites in nitrogen-doped carbon materials by sulfur-doping engineering for sodium ion batteries. Electrochimica Acta, 2022, 424: 140645, J]