Effect of porosity on free vibration and buckling of functionally graded porous beams with non-uniform cross-section

Zeinab Bagheri , Alireza Fiouz , Mahmood Seraji

Journal of Central South University ›› 2024, Vol. 31 ›› Issue (3) : 841 -857.

PDF
Journal of Central South University ›› 2024, Vol. 31 ›› Issue (3) : 841 -857. DOI: 10.1007/s11771-023-5302-z
Article

Effect of porosity on free vibration and buckling of functionally graded porous beams with non-uniform cross-section

Author information +
History +
PDF

Abstract

The purpose of this work is to investigate the effect of porosity on free vibration and buckling behaviours of non-uniform cross-section functionally graded porous beams. The material properties are considered varied along the thickness direction while the cross-section is non-uniform along the length of the beam. Three different patterns including symmetric, non-symmetric and uniform have been considered as the porosity distribution. The classical beam theory and Hamilton’s principle are used to derive the governing equations of the problem and the derived formulations are solved using differential quadrature method. The obtained results were validated via both well-known and analytical reported solutions. The optimal discretization setting was determined via mesh independency study. Detailed parametric analyses are presented to get an insight into the effects of different mechanical parameters including porosity coefficient, slenderness ratio and varying cross-section on the fundamental frequency and critical buckling load. The results show that an increase in material porosity leads to a significant reduction in beam buckling capacity. However, the free vibration behaviour of beams completely depends on their porosity pattern. In addition, the symmetric distribution pattern has the best performance in the terms of beam buckling capacity and fundamental frequency.

Keywords

porosity / functionally graded porous beams / free vibration / buckling / non-uniform cross-section / differential quadrature method

Cite this article

Download citation ▾
Zeinab Bagheri, Alireza Fiouz, Mahmood Seraji. Effect of porosity on free vibration and buckling of functionally graded porous beams with non-uniform cross-section. Journal of Central South University, 2024, 31(3): 841-857 DOI:10.1007/s11771-023-5302-z

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

KoizumiM. FGM activities in Japan. Composites Part B: Engineering, 1997, 28(1–2): 1-4 J]

[2]

HaboussiM, SankarA, GanapathiM. Nonlinear axisymmetric dynamic buckling of functionally graded graphene reinforced porous nanocomposite spherical caps. Mechanics of Advanced Materials and Structures, 2021, 28(2): 127-140 J]

[3]

FahsiB, BouiadjraR B, MahmoudiA, et al. . Assessing the effects of porosity on the bending, buckling, and vibrations of functionally graded beams resting on an elastic foundation by using a new refined quasi-3D theory. Mechanics of Composite Materials, 2019, 55(2): 219-230 J]

[4]

PradhanK K, ChakravertyS. Free vibration of Euler and Timoshenko functionally graded beams by Rayleigh - Ritz method. Composites Part B: Engineering, 2013, 51: 175-184 J]

[5]

BENYAMINA A B, BOUDERBA B, SAOULA A. Bending response of composite material plates with specific properties, case of a typical FGM “ceramic/metal” in thermal environments [J]. Periodica Polytechnica Civil Engineering, 2018. DOI: https://doi.org/10.3311/ppci.11891.

[6]

EbrahimiF, MokhtariM. Transverse vibration analysis of rotating porous beam with functionally graded microstructure using the differential transform method. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2015, 37(4): 1435-1444 J]

[7]

WangD, DengG-w, YangY-q, et al. . Interface microstructure and mechanical properties of selective laser melted multilayer functionally graded materials. Journal of Central South University, 2021, 28(4): 1155-1169 J]

[8]

ChenD, YangJ, KitipornchaiS. Elastic buckling and static bending of shear deformable functionally graded porous beam. Composite Structures, 2015, 133: 54-61 J]

[9]

AtmaneH A, TounsiA, BernardF. Effect of thickness stretching and porosity on mechanical response of a functionally graded beams resting on elastic foundations. International Journal of Mechanics and Materials in Design, 2017, 13(1): 71-84 J]

[10]

ShafieiN, KazemiM. Nonlinear buckling of functionally graded nano-/micro-scaled porous beams. Composite Structures, 2017, 178: 483-492 J]

[11]

YangT-z, TangY, LiQ, et al. . Nonlinear bending, buckling and vibration of bi-directional functionally graded nanobeams. Composite Structures, 2018, 204: 313-319 J]

[12]

ArshidE, KhorasaniM, Soleimani-JavidZ, et al. . Porosity-dependent vibration analysis of FG microplates embedded by polymeric nanocomposite patches considering hygrothermal effect via an innovative plate theory. Engineering with Computers, 2022, 38(5): 4051-4072 J]

[13]

Al-OstaM, SaidiH, TounsiA, et al. . Influence of porosity on the hygro-thermo-mechanical bending response of an AFG ceramic-metal plates using an integral plate model. Smart Structures and Systems, 2021, 28(4): 499-513[J]

[14]

KumarY, GuptaA, TounsiA. Size-dependent vibration response of porous graded nanostructure with FEM and nonlocal continuum model. Advances in Nano Research, 2021, 11: 001-017[J]

[15]

van VinhP, van ChinhN, TounsiA. Static bending and buckling analysis of bi-directional functionally graded porous plates using an improved first-order shear deformation theory and FEM. European Journal of Mechanics-A/Solids, 2022, 96: 104743 J]

[16]

van VinhP, TounsiA, BelarbiM O. On the nonlocal free vibration analysis of functionally graded porous doubly curved shallow nanoshells with variable nonlocal parameters. Engineering With Computers, 2023, 39(1): 835-855 J]

[17]

SinirS, ÇevikM, SinirB G. Nonlinear free and forced vibration analyses of axially functionally graded Euler-Bernoulli beams with non-uniform cross-section. Composites Part B: Engineering, 2018, 148123-131 J]

[18]

LiZ-y, XuY-p, HuangDan. Analytical solution for vibration of functionally graded beams with variable cross-sections resting on Pasternak elastic foundations. International Journal of Mechanical Sciences, 2021, 191: 106084 J]

[19]

BekkayeT, TahsiB, BousahlaA A, et al. . Porosity-dependent mechanical behaviors of FG plate using refined trigonometric shear deformation theory comput. Computers and Concrete, 2020, 26439-450[J]

[20]

GuellilM, SaidiH, BouradaF, et al. . Influences of porosity distributions and boundary conditions on mechanical bending response of functionally graded plates resting on Pasternak foundation. Steel and Composite, 2021, 38(1): 1-15[J]

[21]

A Z, BOUSAHLA A A, BOURADA F, et al. Bending analysis of functionally graded porous plates via a refined shear deformation theory [J]. 2020, 26(1): 63–74. DOI: https://doi.org/10.12989/CAC.2020.26.1.063.

[22]

PhamQ H, Thanh TranT, van keT, et al. . Free vibration of functionally graded porous non-uniform thickness annular-nanoplates resting on elastic foundation using ES-MITC3 element. Alexandria Engineering Journal, 2022, 61(3): 1788-1802 J]

[23]

WANG Peng-wen, HUO Jiao-fei, DEHINI R, et al. Buckling of functionally graded nonuniform and imperfect nanotube using higher order theory [J]. Waves in Random and Complex Media, 2021: 1–24. DOI: https://doi.org/10.1080/17455030.2021.1892864.

[24]

JamshidiM, ArghavaniJ. Optimal design of two-dimensional porosity distribution in shear deformable functionally graded porous beams for stability analysis. Thin-Walled Structures, 2017, 120: 81-90 J]

[25]

TangH-s, LiL, HuY-jin. Buckling analysis of two-directionally porous beam. Aerospace Science and Technology, 2018, 78: 471-479 J]

[26]

KaddariM, KaciA, BousahlaA A, et al. . A study on the structural behaviour of functionally graded porous plates on elastic foundation using a new quasi-3D model: Bending and free vibration analysis. Computers and Concrete, 2020, 25(1): 37-57[J]

[27]

BellifaH, SelimM M, ChikhA, et al. . Influence of porosity on thermal buckling behavior of functionally graded beams. Smart Structures and Systems, 2021, 27(4): 719-728[J]

[28]

TahirS I, ChikhA, TounsiA, et al. . Wave propagation analysis of a ceramic-metal functionally graded sandwich plate with different porosity distributions in a hygro-thermal environment. Composite Structures, 2021, 269: 114030 J]

[29]

LiuG-l, WuS-b, ShahsavariD, et al. . Dynamics of imperfect inhomogeneous nanoplate with exponentially-varying properties resting on viscoelastic foundation. European Journal of Mechanics-A, 2022, 95104649 J]

[30]

BotI K, BousahlaA A, ZemriA, et al. . Effects of Pasternak foundation on the bending behavior of FG porous plates in hygrothermal environment. Steel and Composite Structures, 2022, 43821-837[J]

[31]

ThanhC L, NguyenK D, HoangL M, et al. . Nonlinear bending analysis of porous sigmoid FGM nanoplate via IGA and nonlocal strain gradient theory. Advances in Nano Research, 2022, 12(5): 441-455[J]

[32]

WattanasakulpongN, UngbhakornV. Linear and nonlinear vibration analysis of elastically restrained ends FGM beams with porosities. Aerospace Science and Technology, 2014, 32(1): 111-120 J]

[33]

AkbaçÇ D D. Forced vibration analysis of functionally graded porous deep beams. Composite Structures, 2018, 186: 293-302 J]

[34]

ChenD, KitipornchaiS, YangJie. Dynamic response and energy absorption of functionally graded porous structures. Materials & Design, 2018, 140: 473-487 J]

[35]

FazzolariF A. Generalized exponential, polynomial and trigonometric theories for vibration and stability analysis of porous FG sandwich beams resting on elastic foundations. Composites Part B: Engineering, 2018, 136: 254-271 J]

[36]

BertC W, MalikM. Differential quadrature method in computational mechanics: A review. Applied Mechanics Reviews, 1996, 49(1): 1-28 J]

[37]

Al-FurjanM S H, HatamiA, HabibiM, et al. . On the vibrations of the imperfect sandwich higher-order disk with a lactic core using generalize differential quadrature method. Composite Structures, 2021, 257: 113150 J]

[38]

ShariatiA, HabibiM, TounsiA, et al. . Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties. Engineering with Computers, 2021, 37(4): 3629-3648 J]

[39]

KongF-l, DongF-h, DuanM-j, et al. . On the vibrations of the Electrorheological sandwich disk with composite face sheets considering pre and post-yield regions. Thin-Walled Structures, 2022, 179109631 J]

[40]

TangY, LiC-l, YangT-zhi. Application of the generalized differential quadrature method to study vibration and dynamic stability of tri-directional functionally graded beam under magneto-electro-elastic fields. Engineering Analysis with Boundary Elements, 2023, 146808-823 J]

[41]

TangY, QingHai. Size-dependent nonlinear post-buckling analysis of functionally graded porous Timoshenko microbeam with nonlocal integral models. Communications in Nonlinear Science and Numerical Simulation, 2023, 116: 106808 J]

[42]

Al-FurjanM S H, HabibiM, NiJ, et al. . Frequency simulation of viscoelastic multi-phase reinforced fully symmetric systems. Engineering With Computers, 2022, 38(5): 3725-3741 J]

[43]

Al-FurjanM S H, HabibiM, GhabussiA, et al. . Non-polynomial framework for stress and strain response of the FG-GPLRC disk using three-dimensional refined higher-order theory. Engineering Structures, 2021, 228111496 J]

[44]

Al-FurjanM S H, HabibiM, RahimiA, et al. . Chaotic simulation of the multi-phase reinforced thermo-elastic disk using GDQM. Engineering With Computers, 2022, 38(1): 219-242 J]

[45]

ZhangN, ZhaoX, ZhengS-j, et al. . Size-dependent static bending and free vibration analysis of porous functionally graded piezoelectric nanobeams. Smart Materials and Structures, 2020, 29(4): 045025 J]

[46]

KaramiB, JanghorbanM, RabczukT. Dynamics of two-dimensional functionally graded tapered Timoshenko nanobeam in thermal environment using nonlocal strain gradient theory. Composites Part B: Engineering, 2020, 182107622 J]

[47]

ShafieiN, MousaviA, GhadiriM. On size-dependent nonlinear vibration of porous and imperfect functionally graded tapered microbeams. International Journal of Engineering Science, 2016, 10642-56 J]

[48]

YangT-z, TangY, LiQ, et al. . Nonlinear bending, buckling and vibration of bi-directional functionally graded nanobeams. Composite Structures, 2018, 204313-319 J]

[49]

ShafieiN, MirjavadiS S, MohaselafshariB, et al. . Vibration of two-dimensional imperfect functionally graded (2D-FG) porous nano-/micro-beams. Computer Methods in Applied Mechanics and Engineering, 2017, 322: 615-632 J]

[50]

RahmaniA, FaroughiS, FriswellM I. The vibration of two-dimensional imperfect functionally graded (2D-FG) porous rotating nanobeams based on general nonlocal theory. Mechanical Systems and Signal Processing, 2020, 144: 106854 J]

[51]

YasM H, RahimiS. Thermal buckling analysis of porous functionally graded nanocomposite beams reinforced by graphene platelets using Generalized differential quadrature method. Aerospace Science and Technology, 2020, 107106261 J]

[52]

HuangX-p, HaoH-d, OslubK, et al. . Dynamic stability/instability simulation of the rotary size-dependent functionally graded microsystem. Engineering With Computers, 2022, 38(5): 4163-4179 J]

[53]

KhakpourM, Bazargan-LariY, ZahedinejadP, et al. . Vibrations evaluation of functionally graded porous beams in thermal surroundings by generalized differential quadrature method. Shock and Vibration, 2022, 20221-15 J]

[54]

ChenD, KitipornchaiS, YangJie. Nonlinear free vibration of shear deformable sandwich beam with a functionally graded porous core. Thin-Walled Structures, 2016, 107: 39-48 J]

[55]

ChenD, YangJ, KitipornchaiS. Free and forced vibrations of shear deformable functionally graded porous beams. International Journal of Mechanical Sciences, 2016, 108–109: 14-22 J]

[56]

KitipornchaiS, ChenD, YangJie. Free vibration and elastic buckling of functionally graded porous beams reinforced by graphene platelets. Materials & Design, 2017, 116: 656-665 J]

[57]

CalimF F. Transient analysis of axially functionally graded Timoshenko beams with variable cross-section. Composites Part B: Engineering, 2016, 98: 472-483 J]

[58]

JamshidiM, ArghavaniJ, MaboudiG. Post-buckling optimization of two-dimensional functionally graded porous beams. International Journal of Mechanics and Materials in Design, 2019, 15(4): 801-815 J]

[59]

LiuY-j, SuS-k, HuangH-w, et al. . Thermal-mechanical coupling buckling analysis of porous functionally graded sandwich beams based on physical neutral plane. Composites Part B: Engineering, 2019, 168: 236-242 J]

[60]

WattanasakulpongN, Gangadhara PrustyB, KellyD W, et al. . Free vibration analysis of layered functionally graded beams with experimental validation. Materials & Design, 2012, 36: 182-190 J]

[61]

RICHARD B, GEORGE A. Partial differential equations: New methods for their treatment and solution [M]. Springer, 1985. DOI: https://doi.org/10.1007/978-94-009-5209-6.

[62]

ZHI Zong, YING Yan-zhang. Advanced Differential Quadrature Methods [M]. New York, 2009. DOI: https://doi.org/10.1201/9781420082494.

[63]

BertC. Differential quadrature and its application in engineering, by Chang Shu, springer, london, 2000. International Journal of Robust and Nonlinear Control, 2001, 11: 1398-1399 J]

[64]

YooC H, LeeS CBuckling of Columns, 2011, Boston, Butterworth-Heinemann M]

[65]

RaoS SMechanical vibrations, 2011, Upper Saddle River, USA, Prentice Hall[M]

AI Summary AI Mindmap
PDF

368

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/