A Payload Data Storage and Management Method for Chang’E-5

Abstract

According to the requirements of multi-load data scheduling，storage multiplexing，storage management and high reliability of lunar exploration project，a management scheme of large-capacity data multiplexing storage module based on NAND Flash chip is designed. Axcelerator series anti-fuse FPGA chip with anti-radiation characteristics is used as the main control chip for scheduling management and storage control of multi-channel load data，and large-capacity NAND Flash chip is used for storage management of multiple loads and on-board telemetry，which realizes the functions of data recording，data management and data playback for multiple data sources as required. The practice results show that the requirements of data multiplexing，storage and playback for deep space exploration can be realized through data transmission frame coding and variable rate playback，which provides reference for the high-speed data downloading for subsequent deep space exploration.

Keywords

Chang’E-5；data scheduling / storage / code

References

[1] YANG T,XIA Z,SHI D,et al. Analysis and optimization of threshold voltage variability by polysilicon grain size simulation in 3D NAND Flash memory[J]. IEEE Journal of the Electron Devices Society,2020(8):140-144
[2] OUYANG Y,XIA Z,YANG T,et al. Optimization of performance and reliability in 3D NAND flash memory[J]. IEEE Electron Device Letters,2020,41(6):840-843
[3] LUO T,PELEATO B. Multi-page read for NAND Flash[J]. IEEE Transactions on Circuits & Systems II Express Briefs,2017,64(1):76-80
[4] 李姗,宋琪,朱岩,等. 星载大容量固态存储器快速可靠启动算法设计[J]. 哈尔滨工业大学学报,2015,47(10):100-105
LI S,SONG Q,ZHU Y,et al. Design of quick initialization algorithm for space-borne solid state recorder[J]. Journal of Harbin Institute of Technology,2015,47(10):100-105
[5] 宋琪,邹业楠,李珊,等. 卫星固态存储器数据容错设计与机制[J]. 国防科技大学学报,2016,38(1):101-106
SONG Q,ZOU Y N,LI S,et al. Design and mechanism of the fault tolerance of solid state recorder[J]. Journal of National University of Defense Technology,2016,38(1):101-106
[6] 张伟东,董振兴,朱岩,等. 星载固态存储控制器标准化,可配置通用设计[J]. 微电子学与计算机,2019,36(9):61-66
ZHANG W D,DONG Z X,ZHU Y,et al. Standardized,configurable universal design for onboard solid state memory controllers[J]. Microelectronics & Computer,2019,36(9):61-66
[7] 刘哲,邓畅霖,郭薇,等. 星座通信网建设过程中的端到端延时及存储需求分析[J]. 宇航学报,2016,37(7):854-861
LIU Z,DENG C L,GUO W,et al. Analysis on end-to-end delay and storage requirements during progressive construction of satellite constellation communications network[J]. Journal of Astronautics,2016,37(7):854-861
[8] 刘光辉,周军,孙菲. 皮纳卫星数据存储系统设计与在轨验证[J]. 哈尔滨工业大学学报,2018,50(2):178-183
LIU G H,ZHOU J,SUN F. Design and in-orbit verification of data storage system for nano-pico satellites[J]. Journal of Harbin Institute of Technology,2018,50(2):178-183
[9] 司锋,张强. 基于数据路由的星载高速数据处理系统研究[J]. 测绘通报,2014(S1):27-31
SI F,ZHANG Q. Research on space-borne high-speed data processing system based on data routing[J]. Bulletin of Surveying and Mapping,2014(S1):27-31
[10] 黄炜. 卫星数据的分布式存储系统设计与验证[J]. 遥感信息,2020,35(5):66-71
HUANG W. Design and verification of distributed file system based on satellite data[J]. Remote Sensing Information,2020,35(5):66-71
[11] 陈斌,沈卫华,朱岩,等. 嫦娥二号卫星大容量存储器设计[J]. 航天器工程,2011,20(5):99-104
CHEN B,SHEN W H,ZHU Y,et al. Design of solid state recorder for Chang'e-2 orbiter[J]. Spacecraft Engineering,2011,20(5):99-104
[12] 刘红伟. 基于CPCI架构卫星信号数据存储平台的硬件设计[J]. 电子技术与软件工程,2019(13):178
[13] 许志宏,董振兴,安军社. 基于FPGA的星载一体化高速数据复接器设计[J]. 电子设计工程,2018,26(5):184-188,193
XU Z H,DONG Z X,AN J S. Design of spaceborne integrated high-speed data multiplexer based on FPGA[J]. Electronic Design Engineering,2018,26(5):184-188,193