Investigation and optimization of high-valent Ta-doped SrFeO_3−δ as air electrode for intermediate-temperature solid oxide fuel cells

Abstract

To explore highly active and thermomechanical stable air electrodes for intermediate-temperature solid oxide fuel cells (IT-SOFCs), 10mol% Ta⁵⁺ doped in the B site of strontium ferrite perovskite oxide (SrTa_0.1Fe_0.9O_3−δ, STF) is investigated and optimized. The effects of Ta⁵⁺ doping on structure, transition metal reduction, oxygen nonstoichiometry, thermal expansion, and electrical performance are evaluated systematically. Via 10mol% Ta⁵⁺ doping, the thermal expansion coefficient (TEC) decreased from 34.1 × 10⁻⁶ (SrFeO_3−δ) to 14.6 × 10⁻⁶ K⁻¹ (STF), which is near the TEC of electrolyte (13.3 × 10⁻⁶ K⁻¹ for Sm_0.2Ce_0.8O_1.9, SDC), indicates excellent thermomechanical compatibility. At 550–750°C, STF shows superior oxygen vacancy concentrations (0.262 to 0.331), which is critical in the oxygen-reduction reaction (ORR). Oxygen temperature-programmed desorption (O₂-TPD) indicated the thermal reduction onset temperature of iron ion is around 420°C, which matched well with the inflection points on the thermos-gravimetric analysis and electrical conductivity curves. At 600°C, the STF electrode shows area-specific resistance (ASR) of 0.152 Ω·cm² and peak power density (PPD) of 749 mW·cm⁻². ORR activity of STF was further improved by introducing 30wt% Sm_0.2Ce_0.8O_1.9 (SDC) powder, STF + SDC composite cathode achieving outstanding ASR value of 0.115 Ω·cm² at 600°C, even comparable with benchmark cobalt-containing cathode, Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ (BSCF). Distribution of relaxation time (DRT) analysis revealed that the oxygen surface exchange and bulk diffusion were improved by forming a composite cathode. At 650°C, STF + SDC composite cathode achieving an outstanding PPD of 1117 mW·cm⁻². The excellent results suggest that STF and STF + SDC are promising air electrodes for IT-SOFCs.

Keywords

strontium ferrite-based perovskite / Ta doping / composite cathode / intermediate-temperature solid oxide fuel cells

References

[1] Zhang Y, Chen B, Guan DQ, et al. Thermal-expansion offset for high-performance fuel cell cathodes. Nature, 2021, 591, 246.

[2] Yang GM, Su C, Shi HG, et al. Toward reducing the operation temperature of solid oxide fuel cells: Our past 15 years of efforts in cathode development. Energy Fuels, 2020, 34(12): 15169.

[3] M. Wang, C. Su, Z.H. Zhu, H. Wang, and L. Ge, Composite cathodes for protonic ceramic fuel cells: Rationales and materials, Composites Part B, 238(2022), art. No. 109881.

[4] Song J, Birdja YY, Pant D, Chen ZY, Vaes J. Recent progress in the structure optimization and development of proton-conducting electrolyte materials for low-temperature solid oxide cells. Int. J. Miner. Metall. Mater., 2022, 29(4): 848.

[5] Yusoff WNAW, Baharuddin NA, Somalu MR, Muchtar A, Brandon NP, Fan HQ. Recent advances and influencing parameters in developing electrode materials for symmetrical solid oxide fuel cells. Int. J. Miner. Metall. Mater., 2023, 30(10): 1933.

[6] Liu GY, Hou FG, Peng SL, Wang XD, Fang BZ. Process and challenges of stainless steel based bipolar plates for proton exchange membrane fuel cells. Int. J. Miner. Metall. Mater., 2022, 29(5): 1099.

[7] Yang X, Du ZH, Zhang Q, et al. Effects of operating conditions on the performance degradation and anode microstructure evolution of anode-supported solid oxide fuel cells. Int. J. Miner. Metall. Mater., 2023, 30(6): 1181.

[8] Bhupaijit P, Kaewsai C, Suriwong T, et al. Effect of Co²⁺ substitution in B-sites of the perovskite system on the phase formation, microstructure, electrical and magnetic properties of Bi_0.5(Na_0.68K_0.22Li_0.10)_0.5TiO₃ ceramics. Int. J. Miner. Metall. Mater., 2022, 29(9): 1798.

[9] J. Yu, Z. Li, T. Liu, et al., Morphology control and electronic tailoring of Co_xA_y (A = P, S, Se) electrocatalysts for water splitting, Chem. Eng. J., 460(2023), art. No. 141674.

[10] J.X. Pan, Y.J. Ye, M.Z. Zhou, et al., Improving the activity and stability of Ni-based electrodes for solid oxide cells through surface engineering: Recent progress and future perspectives, Mater. Rep. Energy, 1(2021), No. 2, art. No. 100025.

[11] Liang FL, Zhou W, Zhu ZH. A highly stable and active hybrid cathode for low-temperature solid oxide fuel cells. ChemElectroChem, 2014, 1(10): 1627.

[12] Li SY, Lü Z, Wei B, et al. A study of (Ba_0.5Sr_0.5)_1−x Sm_xCo_0.8Fe_0.2O_3−δ as a cathode material for IT-SOFCs. J. Alloys Compd., 2006, 426(1–2): 408.

[13] Park S, Choi S, Shin J, Kim G. Tradeoff optimization of electrochemical performance and thermal expansion for Co-based cathode material for intermediate-temperature solid oxide fuel cells. Electrochim. Acta, 2014, 125, 683.

[14] Huang Q, Jiang SS, Wang YJ, et al. Highly active and durable triple conducting composite air electrode for low-temperature protonic ceramic fuel cells. Nano Res., 2023, 16(7): 9280.

[15] Wedig A, Merkle R, Stuhlhofer B, Habermeier HU, Maier J, Heifets E. Fast oxygen exchange kinetics of pore-free Bi_1−xSr_xFeO_3−δ thin films. Phys. Chem. Chem. Phys., 2011, 13(37): 16530.

[16] Jiang SS, Sunarso J, Zhou W, Shen J, Ran R, Shao ZP. Cobalt-free SrNb_xFe_1−xO_3−δ (x = 0.05, 0.1 and 0.2) perovskite cathodes for intermediate temperature solid oxide fuel cells. J. Power Sources, 2015, 298, 209.

[17] Zhou YC, Meng X, Liu XJ, et al. Novel architectured metal-supported solid oxide fuel cells with Mo-doped SrFeO_3−δ electrocatalysts. J. Power Sources, 2014, 267, 148.

[18] Piao JH, Sun KN, Zhang NQ, Chen XB, Xu S, Zhou DR. Preparation and characterization of Pr_1−xSr_xFeO₃ cathode material for intermediate temperature solid oxide fuel cells. J. Power Sources, 2007, 172(2): 633.

[19] Y.F. Song, Y.B. Chen, M.G. Xu, et al., A cobalt-free multiphase nanocomposite as near-ideal cathode of intermediate-temperature solid oxide fuel cells developed by smart self-assembly, Adv. Mater., 32(2020), No. 8, art. No. e1906979.

[20] H.G. Shi, C. Su, X.M. Xu, et al., Building Ruddlesden-Popper and single perovskite nanocomposites: A new strategy to develop high-performance cathode for protonic ceramic fuel cells, Small, 17(2021), No. 35, art. No. e2101872.

[21] Liang FL, Wang ZX, Wang ZR, Mao JK, Sunarso J. Electrochemical performance of cobalt-free Nb and Ta co-doped perovskite cathodes for intermediate-temperature solid oxide fuel cells. ChemElectroChem, 2017, 4(9): 2366.

[22] D.M. Huan, L. Zhang, K. Zhu, et al., Oxygen vacancy-engineered cobalt-free Ruddlesden-Popper cathode with excellent CO2 tolerance for solid oxide fuel cells, J. Power Sources, 497(2021), art. No. 229872.

[23] Wan TH, Saccoccio M, Chen C, Ciucci F. Influence of the discretization methods on the distribution of relaxation times deconvolution: Implementing radial basis functions with DRT tools. Electrochim. Acta, 2015, 184, 483.