Effect of hafnium and molybdenum addition on inclusion characteristics in Co-based dual-phase high-entropy alloys

Abstract

Specific grades of high-entropy alloys (HEAs) can provide opportunities for optimizing properties toward high-temperature applications. In this work, the Co-based HEA with a chemical composition of Co_47.5Cr₃₀Fe_7.5Mn_7.5Ni_7.5 (at%) was chosen. The refractory metallic elements hafnium (Hf) and molybdenum (Mo) were added in small amounts (1.5at%) because of their well-known positive effects on high-temperature properties. Inclusion characteristics were comprehensively explored by using a two-dimensional cross-sectional method and extracted by using a three-dimensional electrolytic extraction method. The results revealed that the addition of Hf can reduce Al₂O₃ inclusions and lead to the formation of more stable Hf-rich inclusions as the main phase. Mo addition cannot influence the inclusion type but could influence the inclusion characteristics by affecting the physical parameters of the HEA melt. The calculated coagulation coefficient and collision rate of Al₂O₃ inclusions were higher than those of HfO₂ inclusions, but the inclusion amount played a larger role in the agglomeration behavior of HfO₂ and Al₂O₃ inclusions. The impurity level and active elements in HEAs were the crucial factors affecting inclusion formation.

References

[1] MiracleDB, SenkovON. A critical review of high entropy alloys and related concepts. Acta Mater., 2017, 122: 448

[2] ChengZ, WangSZ, WuGL, GaoJH, YangXS, WuHH. Tribological properties of high-entropy alloys: A review. Int. J. Miner. Metall. Mater., 2022, 29(3): 389

[3] WuYQ, LiawPK, LiRX, et al. . Relationship between the unique microstructures and behaviors of high-entropy alloys. Int. J. Miner. Metall. Mater., 2024, 31(6): 1350

[4] P.J. Shi, W.L. Ren, T.X. Zheng, et al., Enhanced strength-ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae, Nat. Commun., 10(2019), No. 1, art. No. 489.

[5] LiZ, PradeepKG, DengY, RaabeD, TasanCC. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off. Nature, 2016, 534(7606): 227

[6] Y. Zhang, M. Zhang, D.Y. Li, et al., Compositional design of soft magnetic high entropy alloys by minimizing magnetostriction coefficient in (Fe_0.3Co_0.5Ni_0.2)_100−x(Al_1/3Si_2/3)_x system, Metals, 9(2019), No. 3, art. No. 382.

[7] ZhangM, HouJX, YangHJ, et al. . Tensile strength prediction of dual-phase Al_0.6CoCrFeNi high-entropy alloys. Int. J. Miner. Metall. Mater., 2020, 27(10): 1341

[8] WangW, HouZY, LizárragaR, et al. . An experimental and theoretical study of duplex fcc+hcp cobalt based entropic alloys. Acta Mater., 2019, 176: 11

[9] LiuWH, HeJY, HuangHL, WangH, LuZP, LiuCT. Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys. Intermetallics, 2015, 60: 1

[10] ShunTT, ChangLY, ShiuMH. Microstructures and mechanical properties of multiprincipal component CoCrFeN-iTi_x alloys. Mater. Sci. Eng. A, 2012, 556: 170

[11] H. Ren, R.R. Chen, X.F. Gao, et al., Phase formation and mechanical features in (AlCoCrFeNi)_100−xHf_x high-entropy alloys: The role of Hf, Mater. Sci. Eng. A, 858(2022), art. No. 144156.

[12] ShunTT, ChangLY, ShiuMH. Microstructure and mechanical properties of multiprincipal component CoCrFeN-iMo_x alloys. Mater. Charact., 2012, 70: 63

[13] S. Haas, A.M. Manzoni, F. Krieg, and U. Glatzel, Microstructure and mechanical properties of precipitate strengthened high entropy alloy Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ with additions of hafnium and molybdenum, Entropy, 21(2019), No. 2, art. No. 169.

[14] GaliA, GeorgeEP. Tensile properties of high- and medium-entropy alloys. Intermetallics, 2013, 39: 74

[15] OttoF, HanoldNL, GeorgeEP. Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries. Intermetallics, 2014, 54: 39

[16] OttoF, DlouhýA, PradeepKG, et al. . Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures. Acta Mater., 2016, 112: 40

[17] GludovatzB, HohenwarteA, CatoorD, ChangEH, GeorgeEP, RitchieRO. A fracture-resistant high-entropy alloy for cryogenic applications. Science, 2014, 345(6201): 1153

[18] K.P. Yu, S.H. Feng, C. Ding, P. Yu, and M.X. Huang, Improving anti-corrosion properties of CoCrFeMnNi high entropy alloy by introducing Si into nonmetallic inclusions, Corros. Sci., 208(2022), art. No. 110616.

[19] WangY, LiYL, WangW, et al. . Effect of manufacturing conditions and Al addition on inclusion characteristics in Co-based dual-phase high entropy alloy. Metall. Mater. Trans. A, 2023, 54(7): 2715

[20] QinG, ChenRR, ZhengHT, et al. . Strengthening FCC-CoCrFeMnNi high entropy alloys by Mo addition. J. Mater. Sci. Technol., 2019, 35(4): 578

[21] MaLM, TangXX, JiaLN, YuanSN, GeJR, ZhangH. Influence of Hf contents on interactions between Nb-si-licide based alloys and yttria moulds during directional solidification. Int. J. Refract. Met. Hard Mater., 2012, 33: 87

[22] BenafanO, BigelowGS, GargA, NoebeRD, GaydoshDJ, RogersRB. Processing and scalability of NiTiHf high-temperature shape memory alloys. Shape Mem. Superelasticity, 2021, 7(1): 109

[23] ZhouYZ, VolekA, SingerRF. Influence of solidification conditions on the castability of nickel-base superalloy IN792. Metall. Mater. Trans. A, 2005, 36(3): 651

[24] BelyaevIV, BazhenovVE, KireevAV, MoiseevAV. Nonmetallic inclusions in a new alloy for single-crystal permanent magnets. Arch. Foundry Eng., 2018, 18(2): 11

[25] W. Wang, Y. Wang, W. Mu, et al., Inclusion engineering in Co-based duplex entropic alloys, Mater. Des., 210(2021), art. No. 110097.

[26] QiuCL, WuXH. High cycle fatigue and fracture behaviour of a hot isostatically pressed nickel-based superalloy. Philos. Mag., 2014, 94(3): 242

[27] OhtaH, SuitoH. Activities of MnO in CaO–SiO₂–Al₂O₃–MnO (<10 Pct)–Fe_tO(<3 pct) slags saturated with liquid iron. Metall. Mater. Trans. B, 1995, 26(2): 295

[28] HarunaY. Removal of Inclusions from Cast Superalloy Revert, 1994VancouverUniversity of British Columbia

[29] LuoYZ, ZhangJM, LiuZM, XiaoC, WuSZ. In situ observation and thermodynamic calculation of MnS in 49MnVS3 non-quenched and tempered steel. Acta Metall. Sin. Engl. Lett., 2011, 24(4): 326

[30] MatsushitaT, MukaiK. Chemical Thermodynamics in Materials Science: From Basics to Practical Applications, 2018SingaporeSpringer

[31] RumyantsevaSB, RumyantsevBA, SimonovVN, SpryginGS, KashirtsevVN. Optimum deoxidation of a Kh65NVFT chromium-nickel alloy containing refractory metals. Russ. Metall. Met., 2020, 2020(12): 1349

[32] TakayaS, FurukawaT, MüllerG, et al. . Al-containing ODS steels with improved corrosion resistance to liquid lead-bismuth. J. Nucl. Mater., 2012, 428(1–3): 125

[33] FilipR, Zagula-YavorskaM, PytelM, RomanowskaJ, MaliniakM, SieniawskiJ. The oxidation resistance of non-modified and Zr-modified aluminide coatings deposited by the CVD method. Solid State Phenom., 2015, 227: 361

[34] QianH. The Effect of Processing Parameters on Structure Evolution during Laser Additive Manufacturing and Post-processing of Niobium-Silicide Based Alloys, 2021LeicesterUniversity of Leicester

[35] TurpinML, ElliottJF. Nucleation of oxide inclusions in iron melts. J. Iron. Steel. Inst., 1966, 204: 217

[36] GhenoT, GleesonB. Kinetics of Al₂O₃-scale growth by oxidation and dissolution in molten silicate. Oxid. Met., 2017, 87(3): 527

[37] J.A. Murdzek and S.M. George, Effect of crystallinity on thermal atomic layer etching of hafnium oxide, zirconium oxide, and hafnium zirconium oxide, J. Vac. Sci. Technol. A: Vac. Surf. Films, 38(2020), No. 2, art. No. 022608.

[38] YouDL, MichelicSK, WieserG, BernhardC. Modeling of manganese sulfide formation during the solidification of steel. J. Mater. Sci., 2017, 52(3): 1797

[39] D.L. You, S.K. Michelic, P. Presoly, J.H. Liu, and C. Bernhard, Modeling inclusion formation during solidification of steel: A review, Metals, 7(2017), No. 11, art. No. 460.

[40] AritomiN, GunjiK. Morphology and formation mechanism of dendritic inclusions in iron and iron-nickel alloys deoxidized with silicon and solidified unidirectionally. ISIJ Int., 1979, 19(3): 152

[41] SteinmetzE, LindenbergHU. Morphology of inclusions during deoxidation (of Fe melts) with Al. Arch. Eisenhuttenwes., 1976, 47: 199

[42] ZhangLF, TaniguchiS, CaiKK. Fluid flow and inclusion removal in continuous casting tundish. Metall. Mater. Trans. B, 2000, 31(2): 253

[43] XuanCJ, KarasevAV, JönssonPG. Evaluation of agglomeration mechanisms of non-metallic inclusions and cluster characteristics produced by Ti/Al complex deoxidation in Fe-10mass% Ni alloy. ISIJ Int., 2016, 56(7): 1204

[44] MuW, DoganN, ColeyKS. Agglomeration of non-metallic inclusions at the steel/Ar interface: Model application. Metall. Mater. Trans. B, 2017, 48(4): 2092

[45] BuiuO, DaveyW, LuY, MitrovicIZ, HallS. Ellipsometric analysis of mixed metal oxides thin films. Thin Solid Films, 2008, 517(1): 453

[46] ChenKL, WangDY, HouD, QuTP, TianJ, WangHH. Effect of interfacial properties on agglomeration of inclusions in molten steels. ISIJ Int., 2019, 59(10): 1735

[47] NakajimaK, MuW, JönssonPG. Assessment of a simplified correlation between wettability measurement and dispersion/coagulation potency of oxide particles in ferrous alloy melt. Metall. Mater. Trans. B, 2019, 50(5): 2229

[48] ChainCY, QuilleRA, PasquevichAF. Ball milling induced solid-state reactions in the La₂O₃–HfO₂ ceramic system. J. Alloys Compd., 2010, 495(2): 524

[49] KimuraS, NakajimaK, MizoguchiS. Behavior of alumina-magnesia complex inclusions and magnesia inclusions on the surface of molten low-carbon steels. Metall. Mater. Trans. B, 2001, 32(1): 79

[50] SöderM, JönssonP, JonssonL. Inclusion growth and removal in gas-stirred ladles. Steel Res. Int., 2004, 75(2): 128