Paraffin–CaCl2·6H2O dosage effects on the strength and heat transfer characteristics of cemented tailings backfill
Hai Li, Aibing Jin, Shuaijun Chen, Yiqing Zhao, You Ju
Paraffin–CaCl2·6H2O dosage effects on the strength and heat transfer characteristics of cemented tailings backfill
The challenge of high temperatures in deep mining remains harmful to the health of workers and their production efficiency. The addition of phase change materials (PCMs) to filling slurry and the use of the cold storage function of these materials to reduce downhole temperatures is an effective approach to alleviate the aforementioned problem. Paraffin–CaCl2·6H2O composite PCM was prepared in the laboratory. The composition, phase change latent heat, thermal conductivity, and cemented tailing backfill (CTB) compressive strength of the new material were studied. The heat transfer characteristics and endothermic effect of the PCM were simulated using Fluent software. The results showed the following: (1) The new paraffin–CaCl2·6H2O composite PCM improved the thermal conductivity of native paraffin while avoiding the water solubility of CaCl2·6H2O. (2) The calculation formula of the thermal conductivity of CaCl2·6H2O combined with paraffin was deduced, and the reasons were explained in principle. (3) The “enthalpy-mass scale model” was applied to calculate the phase change latent heat of nonreactive composite PCMs. (4) The addition of the paraffin–CaCl2·6H2O composite PCM reduced the CTB strength but increased its heat absorption capacity. This research can give a theoretical foundation for the use of heat storage backfill in green mines.
paraffin–CaCl2·6H2O / heat transfer simulation / heat calculation / phase change material-based backfill / latent heat of formula
[[1]] |
|
[[2]] |
|
[[3]] |
|
[[4]] |
|
[[5]] |
|
[[6]] |
|
[[7]] |
K.Y. Yu, Y.S. Liu, and Y.Z. Yang, Review on form-stable inorganic hydrated salt phase change materials: Preparation, characterization and effect on the thermophysical properties, Appl. Energy, 292(2021), art. No. 116845.
|
[[8]] |
|
[[9]] |
|
[[10]] |
|
[[11]] |
|
[[12]] |
|
[[13]] |
|
[[14]] |
|
[[15]] |
|
[[16]] |
|
[[17]] |
|
[[18]] |
|
[[19]] |
A.A. Aydin and G. Toprakçı, Synthesis and characterization of new organic phase change materials (PCMs): Diesters of suberic acid, Sol. Energy Mater. Sol. Cells, 220(2021), art. No. 110822.
|
[[20]] |
|
[[21]] |
|
[[22]] |
|
[[23]] |
|
[[24]] |
X.J. Zheng, X.N. Gao, Z.W. Huang, Z.P. Li, Y.T. Fang, and Z.G. Zhang, Form-stable paraffin/graphene aerogel/copper foam composite phase change material for solar energy conversion and storage, Sol. Energy Mater. Sol. Cells, 226(2021), art. No. 111083.
|
[[25]] |
|
[[26]] |
|
[[27]] |
|
[[28]] |
|
[[29]] |
|
[[30]] |
|
[[31]] |
|
[[32]] |
C.F. Shen, X. Li, G.Q. Yang, et al., Shape-stabilized hydrated salt/paraffin composite phase change materials for advanced thermal energy storage and management, Chem. Eng. J., 385(2020), art. No. 123958.
|
[[33]] |
|
[[34]] |
|
[[35]] |
|
[[36]] |
|
[[37]] |
|
[[38]] |
|
[[39]] |
|
[[40]] |
J.Y. Wu, H.W. Jing, Y. Gao, Q.B. Meng, Q. Yin, and Y. Du, Effects of carbon nanotube dosage and aggregate size distribution on mechanical property and microstructure of cemented rockfill, Cem. Concr. Compos., 127(2022), art. No. 104408.
|
[[41]] |
|
[[42]] |
M. Wang, P. Liu, S.Y. Shang, Q. Chen, B. Zhang, and L. Liu, Numerical and experimental studies on the cooling performance of backfill containing phase change materials, Build. Environ., 218(2022), art. No. 109155.
|
[[43]] |
|
[[44]] |
|
[[45]] |
|
[[46]] |
|
[[47]] |
|
/
〈 | 〉 |