PDF
(442KB)
i
This article has been updated.
A Correction to this article was published on .
i
The Original Article was published on
i
The Original Article was published on
i
This article has been updated
i
This article was retracted on
i
This article has been updated
Abstract
Longitudinal sawn wood are usually selected as samples in the study of sound properties of a musical instrument board. But in real production, radial sawn timber are cut and are also widely used as vibration component. Therefore, it is very important to evaluate the vibration properties of the board in the round, especially for the sound radiation characteristic of radial sawn timber and its relationship to longitudinal sawn timber. However, for the national and international experts, researches on radial sawn timber and its role and function in sound emission have not yet been developed. This paper describes a study of seven important spruces that grow up in the Sichuan and Heilongjiang provinces of China, and one Picea sitchensis specimen from North America. Under the high bending vibration mode, resonance frequency and other parameters of longitudinal and radial wood were tested. Analysis result disclosed the relationship between longitudinal and radial wood vibration property. An important conclusion of wood for musical instruments with proper anisotropy, fine toughness, and weak shear of longitudinal and radial vibration was inducted.
Keywords
Picea genera wood, longitudinal, radial, vibration property, relationship
Cite this article
Download citation ▾
SHEN Jun.
Relationships between longitudinal and radial Picea genera sound vibration parameters.
Front. For. China, 2006, 1 (4) : 431-437 DOI:10.1007/s11461-006-0049-x
CHANGE HISTORY
A Correction to this paper has been published:
https://doi.org
The Retraction Note was updated to reflect reception of statements of disagreement from all authors.
This article has been retracted.Please see the Retraction Notice for more detail:
https://doi.org