Frontiers of Electrical and Electronic Engineering >
SPC and Kalman filter-based fault detection and diagnosis for an air-cooled chiller
Received date: 18 Mar 2011
Accepted date: 10 May 2011
Published date: 05 Sep 2011
Copyright
Buildings worldwide account for nearly 40% of global energy consumption. The biggest energy consumer in buildings is the heating, ventilation and air conditioning (HVAC) systems. In HVAC systems, chillers account for a major portion of the energy consumption. Maintaining chillers in good conditions through early fault detection and diagnosis is thus a critical issue.
In this paper, the fault detection and diagnosis for an air-cooled chiller with air coming from outside in variable flow rates is studied. The problem is difficult since the air-cooled chiller is operating under major uncertainties including the cooling load, and the air temperature and flow rate. A potential method to overcome the difficulty caused by the uncertainties is to perform fault detection and diagnosis based on a gray-box model with parameters regarded as constants. The method is developed and verified by us in another paper for a water-cooled chiller with the uncertainty of cooling load. The verification used a Kalman filter to predict parameters of a gray-box model and statistical process control (SPC) for measuring and analyzing their variations for fault detection and diagnosis. The gray-box model in the method, however, requires that the air temperature and flow rate be nearly constant. By introducing two new parameters and deleting data points with low air flow rate, the requirement can be satisfied and the method can then be applicable for an air-cooled chiller. The simulation results show that the method with the revised model and some data points dropped improved the fault detection and diagnosis (FDD) performance greatly. It can detect both sudden and gradual air-cooled chiller capacity degradation and sensor faults as well as their recoveries.
Biao SUN , Peter B. LUH , Zheng O’NEILL . SPC and Kalman filter-based fault detection and diagnosis for an air-cooled chiller[J]. Frontiers of Electrical and Electronic Engineering, 2011 , 6(3) : 412 -423 . DOI: 10.1007/s11460-011-0164-9
| 1 |
Lausten J. Energy efficiency requirements in building codes, energy efficiency policies for new buildings. Paris: IEA Information Paper. International Energy Agency, 2008
|
| 2 |
Rossi T M, Braun J E. Minimizing operating costs of vapor compression equipment with optimal service scheduling. International Journal of Heating, Ventilating, Air Conditioning and Refrigerating Research, 1996, 2(1): 3-25
|
| 3 |
Sun B, Luh P B. Energy doctors: SPC and Kalman filterbased fault detection and diagnosis. In: Proceedings of the 7th IEEE Conference on Automation Science and Engineering. 2011
|
| 4 |
Luh P B, Sun B. Energy doctors: SPC and Kalman filterbased fault detection and diagnosis. UTRC report, 2010
|
| 5 |
Katipamula S, Brambley M R. Methods for fault detection, diagnostics, and prognostics for building systems — A review, Part I. International Journal of Heating, Ventilating, Air Conditioning and Refrigerating Research, 2005, 11(1): 3-25
|
| 6 |
Rossi T M, Braun J E. A statistical, rule-based fault detection and diagnostic method for vapor compression air conditioners. International Journal of Heating, Ventilating, Air Conditioning and Refrigerating Research, 1997, 3(1): 19-37
|
| 7 |
Breuker M S, Braun J E. Evaluating the performance of a fault detection and diagnostic system for vapor compression equipment. International Journal of Heating, Ventilating, Air Conditioning and Refrigerating Research, 1998, 4(4): 401-425
|
| 8 |
Reddy T A, Niebur D, Andersen K K, Pericolo P P, Cabrera G. Evaluation of the suitability of different chiller performance models for on-line training applied to automated fault detection and diagnosis. International Journal of Heating, Ventilating, Air Conditioning and Refrigerating Research, 2003, 9(4): 385-414
|
| 9 |
Jiang Y Q, Yao Y, Deng S, Ma Z L. Applying grey forecasting to predicting the operating energy performance of air cooled water chillers. International Journal of Refrigeration, 2004, 27(4): 385-392
|
| 10 |
McIntosh I B D, Mitchell J W, Beckman W A. Fault detection and diagnosis in chillers, Part 1: Model development and application. ASHRAE Transactions, 2000, 106(2): 268-282
|
| 11 |
Wang S W, Cui J T. Sensor-fault detection, diagnosis, and estimation for centrifugal chiller systems using principalcomponent analysis method. Applied Energy, 2005, 82(3): 197-213
|
| 12 |
Wang S W, Zhou Q, Xiao F. A system-level fault detection and diagnosis strategy for HVAC systems involving sensor faults. Energy and Building, 2010, 42(4): 477-490
|
| 13 |
Breuker M S, Braun J E. Common faults and their impacts for rooftop air conditioners. International Journal of Heating, Ventilating, Air Conditioning and Refrigerating Research, 1998, 4(3): 303-318
|
| 14 |
Gordon J M, Ng K C. Cool Thermodynamics. Cambridge: Cambridge International Science Publishing, 2000
|
| 15 |
Jiang W, Reddy T A. Reevaluation of the Gordon-Ng performance models for water-cooled chillers. ASHRAE Transactions, 2003, 109(2): 272-287
|
| 16 |
Bersimis S, Psarakis S, Panaretos J. Multivariate statistical process control charts: An overview. Quality and Reliability Engineering International, 2007, 23(5): 517-543
|
| 17 |
Bar-Shalom Y, Li X R. Estimation and Tracking-Principles, Techniques, and Software. London: Artech House, 1993
|
/
| 〈 |
|
〉 |