Thresholding-based detection of fine and sparse details

Abstract

Fine and sparse details appear in many quality inspection applications requiring machine vision. Especially on flat surfaces, such as paper or board, the details can be made detectable by oblique illumination. In this study, a general definition of such details is given by defining sufficient statistical properties from histograms. The statistical model allows simulation of data and comparison of methods designed for detail detection. Based on the definition, utilization of the existing thresholding methods is shown to be well motivated. The comparison shows that minimum error thresholding outperforms the other standard methods. Finally, the results are successfully applied to a paper printability inspection application, and the IGT picking assessment, in which small surface defects must be detected. The provided method and measurement system prototype provide automated assessment with results comparable to manual expert evaluations in this laborious task.

Keywords

adaptive thresholding / paper quality inspection / picking / machine vision

References

[1] De La Escalera A, Moreno L E, Salichs M A, Armingol J M. Road traffic sign detection and classification. IEEE Transactions on Industrial Electronics, 1997, 44(6): 848-859

[2] Lia Q, Wang M, Gu W. Computer vision based system for apple surface defect detection. Computers and Electronics in Agriculture, 2002, 36(2-3): 215-223

[3] Medina-Carnicer R, Madrid-Cuevas F J, Fernández-García N L, Carmona-Poyato A. Evaluation of global thresholding techniques in non-contextual edge detection. Pattern Recognition Letters, 2005, 26(10): 1423-1434

[4] Sezgin M, Sankur B. Survey over image thresholding techniques and quantitative performance evaluation. Journal of Electronical Imaging, 2004, 13(1): 146-165

[5] Chan C H, Pang G K H. Fabric defect detection by Fourier analysis. IEEE Transactions on Industry Applications, 2000, 36(5): 1267-1276

[6] Iivarinen J, Rauhamaa J, Visa A. Unsupervised segmentation of surface defects. In: Proceedings of the 13th International Conference on Pattern Recognition. 1996, 356-360

[7] Otsu N. A threshold selection method from gray-level histograms. IEEE Transactions on Systems, Man, and Cybernetics, 1979, 9(1): 62-66

[8] Kittler J, Illingworth J. Minimum error thresholding. Pattern Recognition, 1986, 19(1): 41-47

[9] Kapur J N, Sahoo P K, Wong A K C. A new method for gray-level picture thresholding using the entropy of the histogram. Computer Vision, Graphics, and Image Processing, 1985, 29(3): 273-285

[10] Tsai D M. A fast thresholding selection procedure for multimodal and unimodal histograms. Pattern Recognition Letters, 1995, 16(6): 653-666

[11] Rosin P L. Unimodal thresholding. Pattern Recognition, 2001, 34(11): 2083-2096

[12] Fernández-García N L, Medina-Carnicer R, Carmona-Poyato A, Madris-Cuevas F J, Prieto-Villegas M. Characterization of empirical discrepancy evaluation measures. Pattern Recognition Letters, 2004, 25(5): 35-47

[13] Baradez M O, McGuckin C P, Forraz N, Pettengell R, Hoppe A. Robust and automated unimodal histogram thresholding and potential applications. Pattern Recognition, 2004, 37(6): 1131-1148

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg